Industrial & Scientific Store - Fasteners

• Self drilling Type #1 Metal to Metal Stitching Screws have a 5/16\" hex head with a 9/16\" EPDM washer
• Color on the roof screw heads is painted with a two part polyurethane for longer product life

• Manufactured to ASME B18.5 Specifications

• Includes (375) deck plugs only, no tool
• Plugs are made from actual Azek deck and trim board material so the color and grain match perfectly
• When used with the PVC Tool, the fasteners create a perfect hole for the matching plug, without pre-drilling.
• Compatible with epoxy coated or stainless steel Starborn screws
• Azek Acacia, Azek Kona and Azek Morado now have Alloy Armour Technology

• Common sizes: the diameter is about 3/8 inch, the width is about 4 inch and the length is about 7 inch, this square U bolt has a common size for your different fastening needs, please check the size before ordering
• What's included: you will get 12 pcs of U bolts 4 inch wide, plus 12 pcs of frame plates and 24 pcs of nuts, sufficient quantity and a complete set can meet your use and replacement
• Tough, rust proof, corrosion resistant: constructed with carbon steel and galvanizing process, these U bolts feature fine strength and reliability, rust and corrosion resistance, and can serve you for a long time; Each bolt can bear the weight and still perform well in rainy and wet environments
• Broad utilization: the square U bolt clamp is practical and widely applied in various fields such as industry, manufacturing, maintenance, automotive industry, garment production, etc., which are ideal for fastening pipes, wood, trailers and more
• Suggestions for use: it is recommended to use lubricant when installing this zinc plated U bolt to prevent wear; Use manual wrench or socket ratchet when installing nuts; Do not use high speed power tools or impact tools to tighten nuts

• Specifications : Thread Size: M14x1.5 - Hex Size: 13/16 Inch(21mm) - Height: 1.77 Inch - Conical 60 Degree Seat - Set of 24
• Fit for : For 2015-2023 Ford F-150, 2015-2023 Ford Expedition, 2015-2023 Lincoln Navigator and more
• Finish and Technology : Surface treatment using black electrophoresis to makes the nut has a good look, anti-corrosion and anti-rust ability. Cold forged and heat treatment Improved toughness and impact fatigue resistance of lug nuts.
• Strict Standards : Each batch of lug nuts will be sampled to do a 72-hour salt spray test to ensure that the nuts have good rust and corrosion resistance.
• Service and Guarantee : The lug nuts enjoy a 1-year warranty service. During this period, if there are any problems with the nut, you can contact us. We are willing to provide customers with free replacement, refund, and other services to protect the rights of every customer.

• Carriage bolts have a domed head that is not designed to be driven
• The flat-styled head allows for a smooth exterior finish
• Stainless Steel

• Designed for fastening into solid concrete, brick or hollow block
• Coated for corrosion protection
• Approved for use in ACQ treated lumber
• Reputation for quality, strength and ease of installation from industry professionals
• 1/4\" x 2-1/4\"

• Fast-start self-drilling point prevents splitting and eliminates the need for predrilling
• Flat head leaves a clean, even finish
• Red painted ceramic coating
• 4-layer coating provides superior rust and corrosion protection
• Star drive prevents stripping and camout
• FREE T25 STAR BIT: Free driver bit included in package to match screws and take the guesswork out of installation
• Approximate screw count: 735

• DIN 933
• Grade 8.8 Steel
• Coarse Thread / Fully Threaded
• Tensile Strength: 800 N/mm2 (thru 16 mm diam.) 800 N/mm2 (over 16 mm diam.)
• Class 8.8 Steel, Quenched and Tempered

• DIN 931
• Grade 8.8 Steel
• Coarse Thread / Partially Threaded 22mm inches of Thread
• Tensile Strength: 800 N/mm2 (thru 16 mm diam.) 800 N/mm2 (over 16 mm diam.)
• Class 8.8 Steel, Quenched and Tempered

• DIN 931
• Grade 8.8 Steel
• Coarse Thread / Partially Threaded 30mm inches of Thread
• Tensile Strength: 800 N/mm2 (thru 16 mm diam.) 800 N/mm2 (over 16 mm diam.)
• Class 8.8 Steel, Quenched and Tempered

• Diameter-Threads Per Inch: 7/16-14
• Length: 1-3/4 inch
• Grade 5 bolts for moderate stress applications. Stronger than Grade 2 bolts but not as strong as Grade 8 bolts

• Coarse Thread
• Superior Corrosion Resistance
• Hot Dipped Galvanized Finish
• Grade A
• Full Thread

• BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
• SLOTTED HEX HEAD-Can be driven with a nut driver
• SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
• DIAMOND POINT-Easier to drive the screw to save time