Industrial & Scientific Store - Robotics

• Voltage Rating: 2.0 to 6.0V; Temperature Rating: 0 to 70?C
• Outputs Directly Interface to CMOS, NMOS, and TTL; Large Operating Voltage Range
• Wide Operating Conditions; CMOS low power consumption
• Schmitt Trigger Action at All Inputs; Number of: 14 Pins
• Mounting: Through Hole; Package: DIP-14

• Color of display : Blue
• Operate with 5V DC LCD type: Characters
• 1 Rows and 16 Characters Per Row
• Commonly Used in: Student Project, Collage,copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices

• Infrared receiving module adopts 1838 infrared receiving head Light resistance, strong electromagnetic interference, built-in infrared dedicated IC, can work under 500 lux light intensity.
• Widely used in: stereo, TV, video machine, disc machine, set-top boxes, digital photo frame, car stereo, remote control toys, satellite receivers, hard disk player, air conditioner, heater, electric fan, lighting and other home appliances

• Material:Other, Color:White
• Package Contents:1 Set of Supplies & Accessories
• InvenSense MPU-6050 with MEMS accelerometer and MEMS gyro\";3 Axis Accelerometer, 3 Axis Gyrometer\";Hooks up with Arduino Board and Other Maker Kits\";I2C Based communication with the development board\";;;;;;

• Made of soft leather
• The lenght of line is about 14cm
• It is an environmental 9V battery buckle
• These connectors snap use for the standard 9 volt batteryThe lenght of line is about 6cm
• These connectors snap use for the standard 9 volt battery

• BRAND : OSFT, Model no :TC - 136
• Why choose us ? : Because it is a Lead free (RoHS Compliant). OSFT Tip Tinner is a compressed tablet containing a mixture of lead-free solder and oxide reducing compounds that will revive and maintain the life of your soldering tips. It comes housed in a metal container with a self-adhesive pad on the underside to allow it to be placed on, or near your work station.
• Easy to use, Effective at repairing oxidized iron tips & Prolongs the life of new iron tips.
• 96.5% Tin / 3.0% Silver / 0.5% Copper.
• Rapidly re-tins badly oxidized soldering iron tips.
• 100% customer satisfaction gurantee.

• Working Voltage: 5V(DC)
• Static Current: Less than 2mA
• Output Signal: Electric frequency signal, high level 5V, low level 0V
• Sensor Angle: Not more than 15 degrees
• Detection Distance: 2 cm to 450 cm

• High-performance wireless transceiver system.
• Wireless transceiver Sensitivity (Bit error rate) can reach -80dBm.
• Has a build-in 2.4GHz antenna; user neednt test antenna.
• Low power consumption.
• Has a 2.4GHz digital wireless transceiver.

• BMP180 is a high-precision, small size, ultra-low power pressure sensor that can be used in mobile devices
• Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa, and low power consumption, only 3?A
• BMP180 powerful 8-pin ceramic leadless chip carrier (LCC) ultra-thin package, you can directly through the I2C bus connected with a variety of microprocessors
• Pressure range: 300 ~ 1100hPa (9000 meters above sea level ~ -500 meters)
• Low power consumption: 5?A in standard mode

• Maximum Supply voltage: 35V
• Max Operating Temperature Range: +150?C
• Maximum Output current: 50mA
• Storage temperature range: -55 degreeC to +150 degreeC
• Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100

• Mini Jumper Short Circuit Cap Connectors
• Mini jumper short circuit cap connectors
• 50PCS Mini Micro Jumper for mm Male Pin Header For Arduino
• Jumpers for use on Hard Drives, Circuit Board, Computer Interface cards, also for use with Arduino,
• These are used for controlling the settings of your internal devices motherboards. Optimize your system configurations with high quality standard jumper caps.

• The TSOP1838 or VS1838 is a miniaturized receivers for infrared remote control systems. PIN diode and pre-amplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor.
• TSOP1838/VS1838 is the standard IR remote control receiver series, supporting all major transmission codes. TSOP1838 is sensitive to 38 KHz frequency.
• They have band pass filter inbuilt so ambient light will not cause any harm and this sensor will react only at 38 KHz infrared signal. TSOP1838/VS1838 is an improved version of popular IR Receiver TSOP1738 and can be directly replaced with this new IR receiver.
• Wide operating voltage range: 2.7V to 5.5VDC; Infrared receiver; Frequency: 38KHz; Receiving distance L L5IR = 300MA (test signal) - 10 to 15 Meters
• Package Include 5 x TSOP 1838

• High Torque
• 12V DC MOTOR
• RS-5555 MOTOR

• All the discs are made from selected copper, ensuring excellent conductivity and long-lasting use.
• 12mm brass outer diameter plate and ceramic inner diameter plate. Piezoelectric buzzer film. Can be fitted to used acoustic guitars, CBGs, drums, etc.
• Excellent accessory for acoustic instrument pickups, stomp boxes, contact mics, etc.
• Great for acoustic instrument pickups, stomp boxes, contact mics, etc.
• Package Include 5 x Piezo Sensor

• MQ Gas Sensors compatible ARDUIN0 UN0 / ESP32 / MQTT / Raspberry PI
• MQ2 is one of the commonly used gas sensors in MQ sensor series. It is a Metal Oxide Semiconductor (MOS) type Gas Sensor also known as Chemiresistors
• Gas sensors are employed in factories and manufacturing facilities to identify gas leaks, and to detect smoke and carbon monoxide in homes
• Commonly used to detect toxic or explosive gasses and measure gas concentration
• Package INCLUDED : 1 x MQ-7 - Carbon Monoxide