Industrial & Scientific Store - Robotics

• Package Includes 5 Solder Replacement Tips, 2 Pcs. No-Clean Soldering Flux RMA-223 10cc and 2 Pcs 5Gram Carton Rosin Paste
• 5 Solder Replacement Tips The solder tip includes 5 different shapes and sizes?900M-K, 900M-3.2D, 900M-IS, 900M-3C, 900M-I.
• High Quality Material This solder iron tip made of high quality oxygen-free copper, plated with iron, nickel and chromium, stable capability. Lifetime of the solder tips no less than 50,000 welding spots.
• Wide Compatible Replaceable soldering iron tips 900M-T series for soldering iron and soldering station. Such as: 936,937,907
• SIZE Hole outer diameter 6.5mm/ 0.25in, Hole inner diameter 4.2mm/ 0.16in

• Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
• Analog output
• Build in ultra low noise linear LDO voltage regulator

• Working voltage : 9V
• Power rating : 1A
• Two alligator clips
• Wire color : Red and Black
• Made from soft leather

• Quick heat-up time: 25 watt soldering irons typically have a fast heat-up time, allowing for quick use without long waits for the tool to heat up.
• Lightweight and compact: due to the lower power output, 25 watt soldering irons are often smaller and lighter than higher wattage models, making them easier to handle and store.
• Interchangeable tips: some 25 watt soldering irons come with interchangeable tips of various shapes and sizes, allowing for versatility in soldering different types of components.
• Durability: high-quality 25 watt soldering irons are designed to be durable and long-lasting, with features such as heat-resistant handles and sturdy construction.
• Ergonomic design: An ergonomic handle can provide a comfortable grip and reduce hand fatigue during extended use.

• 100% qriginal hakko bit K- knife shape bit for most soldering application
• Sutable for Hakko-936,SLD-936,938 Bakon-936,938,937 Quick and other brand 936 soldering iron stations
• Bit Made In Japan

• Input voltage: Dc5v power (current): 150ma
• Analog output with increasing concentration, the higher the concentration, the higher the voltage
• A hazardous gas detection apparatus for the family, the environment. Suitable for ammonia, aromatic compounds, sulfur, benzene vapor, smoke and other gases harmful gas detection. Gas-sensitive element test concentration range: 10 to 1000 ppm
• Ttl output valid signal is low level, (output low signal light, which can be accessed microcontroller io port)
• Size: 36 mm x 24 mm x 25 mm(l x w x h), package contents: 1 x mq-135 air quality sensor

• It can be used for Stripping old paint, Drying new coats of paint filler, Varnish applications, Re-melts adhesives/ removing stickers, Soft soldering pipes, Moulding and welding plastics, Shrinking cable ends, foil and sleeves, Welding applications, Thawing frozen water pipes, ski waxing etc
• 2000 Watt power for optimized cooling
• Excellent temperature control and memory setting for consistent temperature requirements
• It has an LCD Display. You can set the temperature from 50 to 600 degreeC with a delta of +/-10 degreeC
• It comes with 2 different type of nozzles. Cone nozzle and Fish tail surface nozzle is handy for different applications
• The heat gun has two heat settings according to your preference
• 2 years warranty from the date of invoice (does not cover products that are improperly used, abused, altered or repaired, nor does it cover consumable good such as knife blades, Screwdriver Bits, etc.)

• Active Buzzer used to generate tones and sounds from a 5V signal.
• Rated Voltage - 5 V
• Min. Sound Output at 10cm - 85 dB
• Resonant Frequency - 2300 ?300 Hz
• Operating Temperature - -20 degreeC to 45 degreeC

• Complete Assembled & Tested Kit with 100% Output Guarantee
• Includes Project Circuit, Abstract & Explanation
• No Logo/Trademark on the PCB
• Complete Technical Support

• Robotbanao 5V DC 28BYJ-48 Stepper Motor is small geared step motor. The 28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver is a popular combination of stepper motor and stepper driver, due to the stability and reliability of the system. This is ULN2003 Stepper Motor Driver Board, small size and easy to use. It uses the ULN2003 driver chip to amplify the control signal from the Arduino. This Ultra Lightweight option is commonly used to run and control the small applications stepper motors.
• Stepper Motor: Standard interface, when used directly pluggable | A, B, C, D four-phase LED indicator | Compact size | For small robotics applications || ULN2003: Power pins are separated | 4-way signal indicator | XH-5P socket
• Dimensions: Stepper Motor: Diameter:28mm | Connector:2.54\" spacing || ULN2003: LxW:42x30mm | Hole pitch(standard):2.54mm
• A 28BYJ-48 Stepper Motor can be used in DIY robotics projects, CNC machines and 3D printers, machines that do not require precise control, motor and security camera, DVD players. It is used for precision level controlling. The ULN2003 motor driver is capable of converting pulse to angular displacement. It is useful for driving and controlling stepper motors.
• Stepper Motor: Rated voltage supply:+5V | No. of phases:4 | Stride angle:5.625 degree/64 | Speed variation ratio:1/64 | Pull-in torque:300 gf.cm | Friction torque:600-1200 gf.cm | Self-positioning torque:>34.3mN.m | In-traction torque:>34.3mN.m (120Hz) | DC resistance:50???7% (25 degreeC) | Insulated resistance:>10M?? (500V) | Insulated power:600VAC/1mA/1s | Frequency:100Hz || ULN2003: 5-12V power supply | 4-way signal indicator | Step angle:5.625 x 1/64 | Reduction ratio:1/64 | Current/Phase: 5V

• Type of Header Pin: Male; Connector Orientation: Straight
• Number of Pins: 40; Pitch: 2.54mm
• Pin Height: 10mm; Length: 101mm
• Width: 2.4mm; Height: 15mm Weight: 2gm
• Packaged by:- Sharvi Technologies (OPC) Pvt. Ltd.; Address:- #09, CK Nagar, AECS layout, Hosa Road, Bangalore-560100

• Voltage:220V-240V~50/60Hz, Input power:40W.
• Preheat.time:3~5minutes
• Straight,tip head
• With a piece of support & Long life replaceble tip
• Packed by sliding card

• Model Number:4.5 - 4.5 series
• Max. Current:0.5A
• Max. Voltage:12V
• Lifetime: 50,000 -100,000 Cycles, Mounting Type: SMD
• Length: 4.5mm, Width: 4.5mm, Height: 3.5mm

• Material: PVC
• Shape Rectangular
• Usage/Application: Electric Fitting
• Color: White
• Color: White Size/Dimension Length: 6 inch Width: 8 inch Height: 2 inch Approx Weight: 200gm

• Current Rating? ? - 10 Amps

• Sold By UG LAND INDIA
• Operating Voltage 3V - 12V DC
• RPM Approximately 150 RPM
• No load current 40 - 80 mA
• Output Torque 3.5 kgf.cm