Industrial & Scientific Store - Robotics

• Package Contents: 1 x Magnetic Float Sensor
• Liquid level Measurement in Hostile Environments
• For use in Many Toxic and Corrosive Chemicals
• Tanks where up to Three Switch Points are Needed

• Max. power rating : 10A
• WIDELY USED IN TRUCK CAR AND SENSORS
• Long life approximately 10,000 clicks

• 2-pin connector cable set (Male and Female pair)
• 22 AWG stranded wire
• Connection Method: Male & Female ends push in and lock
• Material: PVC plastic
• Length: 3.5-inch (9 cm)

• VALUE PACK : Package include 100pcs male header pins.100 Pack male pins are adequate to use for a long time.
• SIZE : Pin Pitch :0.1 inches / 2.54mm; Number of pins: 40pin.Straight single row.Suitable for Arduino, Raspberry Pin or any other electronic project.
• ESSENTIAL ELECTRIC COMPONENT : Straight mounting, Single row, Male pin header, essential electric component, easy to use.Good quality header pins, header pins on 0.1 centers.
• CUTTABLE : They are easy to be cut to any length if needed.They are suitable for electronic project.
• APPLICATION : This connector is widely used in electronic circuit, electrical appliances, instrumentation ,PCB circuit board and so on.

• Avail upto 100% Amazon Pay CASHBACK | Cashback details will be available in the package
• Tested and 100% Working
• Internally Frequency Compensated for Unity Gain
• Large DC Voltage Gain: 100 dB
• Max Power Supply Voltage: ?32Vdc
• Max Differential input voltage: ?32V
• Low Input Offset Voltage: 2 mV

• Low forward voltage; High surge overload rating
• Ideal for printed circuit boards; High temperature soldering: 260 deg C/ 10 s
• Types from 600 V up to 1000 V VRRM; Not ESD Sensitive
• Repetitive peak reverse voltage: 1000V; RMS reverse voltage: 700V
• Operating and Storage temperature: -40 deg C to 150 deg C

• Jumper wires are easy to insert into or remove from these breadboards.
• Color:Red + blue + white + green + yellow
• Colored coordinates for easy component placement
• A terminal strip: Tie-point 170,Accepts a variety of wire sizes
• Material:ABS Features With 170 tie points With self-adhesive tape on the back

• Focus?lines?Intensity can be adjusted?with the help of lens ring head
• Laser Output Type:?Red LINE?Laser
• Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW
• Working current: Min 10mA, Typical 20mA, Max 25mA

• Pitch: 2.54mm, number of pins: 40pin
• Made of copper and plastic
• Type of row: single row, type of pin: straight
• Great tools for arduino prototype shield
• Come with 20pcs male headers and 20pcs female headers

• The interface is clear and simple, powerful, easy to understand, meet almost all our needs,
• Easy to use, Wide voltage power supply (6 ~ 30V) supports micro USB 5.0V power supply,
• There is a key stop function (STOP key), with reverse polarity protection, reverse polarity does not burn,
• Increase the sleep mode, it enables, without any operation within 5 minutes, turn off the monitor automatically, any key to wake up,
• You can set a different OP, CL, LOP parameters, which are independent of each other, were saved; All setup parameters are saved automatically power down.

• Heavy Duty Metal Gears.
• Capability to absorb shock and vibration as a result of elastic compliance.
• Ability to operate with minimum or no lubrication, due to inherent lubricity.
• Relatively low coefficient of friction.

• Adjustable Temperature and heats up fast 60W 220V soldering iron adopts inner-heated ceramic heater technology which makes heat up to 200-450?? within 2 minutes. Great calorific capacity, Rapid heat transfer and fast heat recovery enable you work fast and efficiently
• Aid tools and Tips 6 Double-side Assist tools (Press, Cutting, Scraping, Hooks, Brushes and etc.) and 5PCS different soldering iron tips to meet all kinds of your welding requirements
• Tweezers and Solder Sucker Stainless steel tweezers can safely move the silicon wafer to avoid contamination of the product by hand contact. And solder sucker was made of ABS plastic eco-friendly material, lightweight solder sucker can be operated by one hand. Besides, it is easy to remove and clean
• Solder Wire Tube and Stand Good wettability, electrical conductivity and thermal conductivity of the solder wire tube with the stand is perfect for repairing different basic soldering jobs. The best tools for Repair Work
• PU Carry BagSoldering Tool Kit with Adjustable Temperature Welding Iron; 5 Tips; Desoldering Pump; 2 Tweezers; Tin Wire Tube; Stand and 6 Aid ToolsColour: multicolour

• Please read the full product description
• Buyyart New OSS T12-KUS Soldering Iron Head T12 Heating Core For HAKKO T12/Quicko T12/OSS Soldering Station
• Package Content: - OSS T12-KUS Soldering Iron Head

• Complete Assembled & Tested Kit with 100% Output Guarantee
• Includes Project Circuit, Abstract & Explanation
• No Logo/Trademark on the PCB
• Used for Educational Purposes

• Operate: 5v DC
• LCD type: characters
• Size: 16x2 (2 rows and 16 characters per row)
• LCD display module with yellow backlight
• Built-in industry standard hd44780 equivalent LCD controller