Industrial & Scientific Store - Robotics

• Driver chip: L298 dual H-bridge driver chip.
• Operates up to 35V DC
• Drive part of the peak current Io: 2A / Bridge
• Logical part of the terminal power supply range Vss :4.5V-5.5V
• Maximum power consumption: 20W

• TSOP1838 is the standard IR remote control receiver series, supporting all major transmission codes. TSOP1838 is sensitive to 38 KHz frequency.
• Low power consumption. High immunity against ambient light.
• Wide operating voltage range: 2.7V to 5.5VDC; Infrared receiver; Frequency: 38KHz; Receiving distance L L5IR = 300MA (test signal) - 10 to 15 Meters

• 40 pc male to male ; 40 pc female to female ; 40 pc male to female ;Each cable length about 20cm or 8-inch
• Suitable for Arduino breadboard kit project, PCB project, pc motherboard, etc Through the pin connection, without welding, fit for fast circuit test Can be separated into the assembly containing the wire quantity you required and to support non-standard odd-spaced headers, suitable for arduino breadboard kit project, pcb project, pc motherboard, etc., Through the pin connection, without welding, fit for fast circuit test
• Including: 1 x 40-pin m/ f jumper wires, 1 x 40-pin m/ m jumper wires, 1 x 40-pin f/ f jumper wires
• Reusable for fast build a prototype of an electronic circuit will accept transistors, diodes, leds, resistors, capacitors and virtually all types of components

• Working : This Device will start motor by pressing start button of the controller and it will automatically switch OFF Motor, when the tank is full. User can press start button at any time they want.
• Fully Automatic Controller ,Micro Controller Based Design ,Power Failure protection.(Not Start Motor Every Time on Power Failure.)
• No Man Power Required To Operate As Fully Automatic with 2HP capacity
• Longer Life No Mechanical System /.Avoid Overflow

• V A R TECH 850A has been the choice of Engineers and Technicians in India when it comes to SMD rework stations. Proven product with Industrial Grade Quality, Accuracy and Reliability
• Power Consumption : 270 W, Air Flow : 24 L / Min. (Max.), Temp. Range : 100 ?C ~ 420 ?C
• Industrial Grade Components, Powerful starting, Rapid Heating & Air volume linearly adjustable
• Enclosure for the Pump which ensures low noise & high performance. Heavy Duty SMD rework station.
• A-Z Spares and after sales support from V A R TECH with a dedicated technical team for assistance. 1 Year Warranty against manufacturing defects.

• Avail upto 100% Amazon Pay CASHBACK | Cashback details will be available in the package
• Diameter -35mm Pack of 10.
• Material- copper, colour - White,Gold Tone.
• shape:circle.

• The Robotbanao PIR Motion Sensor Detector Module HC SR501 allows you to sense motion. This usually the motion of humans within the range of the sensor.
• Infrared Sensor | Control Circuit Board | Adjustable sensitivity | Adjustable holding time
• Dimensions(LxWxH):3.2x2.4x1.8cm (Approx.)
• The PIR sensor is used to sense movement of people, animals, or other objects. These are commonly used in security alarms and automatically-activated lighting systems.
• Working Voltage Range:DC 4.5V- 20V | Current Drain:<60uA | Detection Range:<140 degree | Voltage Output:3.3V TTL output | Detection Distance:3 to 7m (Adjustable) | Delay Time:5 to 200s (Adjustable, Default 5s +/- 3%) | Blockade time:2.5s (Default) | Work temperature:-20-+80 degreeC | Sensitivity Setting:Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M) | Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S)

• Genuine 555 IC timer
• Turn-off time less than 2 ?s
• precision timing
• Astable or Monostable Operation
• TTL-Compatible Output Can Sink or Source up to 200 mA

• Input supply voltage: 6V-24VDC
• The maximum output power: 240W
• The maximum continuous output current :5A;(Peak current 8A)
• The LED display the duty ratio 0-100%
• PWM frequency:16kHz Duty Cycle adjustable: 0%-100%

• Number of channel : 16
• Operating voltage : 12V
• Trigger voltage : 12V
• Switching voltage : 250V at 10A
• 12V relay with AC contact capacity of 10A 250V and optocoupler protection

• Size: 250x250x3 mm (LxBxH); Thickness: 3mm
• Material - Aluminium Alloy; Weight - 350 Grams
• There is a hole of 2mm on one corner of plate made in process of anodising of plates for surface finish. Plates may get little bend during transit.
• Plates surface finish may or may not be exactly same as shown in picture.
• Package Include 1 x 3mm Aluminium Sheet

• Max Repetitive peak off-state voltage: 600 V
• Max RMS on-state current: 16 A
• Peak gate power: 20 W

• A detailed user manual/guidebook(PDF) with 25 lessons is provided.
• It is esay for you to learn UNO R3 Microcontroller and programming.
• Quick-responding technical support for free.
• Re-designed case, it is very beautiful, and it is a best gift for children.
• Arduino UNO R3 Microcontroller is included.

• SM series JST connector
• Number of pin : 6
• Current rating : 3A
• Voltage rating : 250V
• Temperature range : -25 degreeC to +85 degreeC

• Inbuilt RGB LED
• ESP32-C3-MINI-N1 Based devboard
• Micro USB
• Buttons to BOOT and RESET
• CH340 Upgraded than the CP2102, making it fast and bounce free

• 100% qriginal hakko bit.
• Pointed bit Size 5.0mm x 17mm.
• Sutable for Hakko-936,SLD-936,938 Bakon-936,938,937 Quick and other brand 936 soldering iron stations. Bit
• Bit Made In Japan.