Water Level Controller By Generic

• Six Nos. Of Sensors
• No Corrosion Sensor
• Compatible With All Water Level Controllers Models
• Material SS 316
• Easy To Fit And Use
• Can Have Capacity Up To 2.5 mm? Wire Fitting And Suitable For Tanks Upto 2000 Liters

• SS Pin Molded Within Plastic
• No Electrical Contact with Water.
• With 0.5 Meter Wire
• 1/2 inch Thread for Direct Pipe Mounting
• Note : Do Not Use with AC Supply, Use 5-24V DC Supply Only

• This Device will start motor by pressing start button of the controller and it will automatically switch OFF Motor, when the tank is full. User can press start button at any time they want. Automatic Controller ,Micro Controller Based Design ,Power Failure protection.(Not Start Motor Every Time on Power Failure.) No Man Power Required To Operate As Fully Automatic with 2HP capacity Longer Life No Mechanical System /.Avoid Overflow

• Three Nos. Of Sensors
• No Corrosion Sensor
• Compatible With All Water Level Controllers Models
• 1.5 Meter Wire Attached
• Easy To Fit And Use
• Long Length Of Wire Of 1.5meter Is Suitable For Tanks Upto 2000 Litres

• water level controller for submersible control panel (runing and startring capacitor types)
• support up to 5 hp single phase submesrible panel
• having 2 power relay (40 amp)
• dual tank oparating with 6 ss sansor and auto manual function
• manufacturer number 9898111264

• Suitable for Single Ph Upto 1 HP
• Fully automatic water level controller with dry run protection single phase
• Contact capacity : 7 A
• Easy to Use and Install

• Motor Wattage: 20A@230V
• AC Single Phase (Upto 2HP)
• Garrenty: 12 Months
• Sensor with Cable 1 Meter
• Only for submersible Pumps having Starter Panel

• Features: Fully automatic, Made in India, One Year Warranty, 4 level indication, motors up to 2 hp, 6 SS sensors, Silent operation, Auto & Manual Mode, Top-Up Switch (manual on auto off), WORKS WITH MCB TYPE STARTERS
• Package contents: 6 High grade stainless steel water level sensor, Main controller panel, Instruction manual, Screws
• excellent quality
• no need of manpower
• easy to install

• RO Spanner-Wrench Suitable for RO Water Purifier -10\" Pre Filter Housing Bowl..Suited for common RO water filter Purifiers available in India, Compatible with many RO Brands and Models-Can be used in multiple water purifier Models-Counter Top, Desk Top, Stand Mounted, Wall Hanging, Under Sink, most of the RO Model cabinet
• Sediment ro filter is normally used in first stage of multi stage water filter system. Frequently replacing of spun/sediment ro filter water purifier protects ro membrane and choking of other water filters. Impurities and sediment removal water filters. These are pre filters commonly used to remove dirt, impurities, sediment, rust, slime, sand, grass and grit
• Must be used before the main RO Machine to protect & inhance the life of inline filters & Membrane use inside the Main machine. & obviously reduces the cost of maintenance.
• Purification Capacity: Micron filter spun filter 10 inch cartridges will typically last between 6 months to 1 year depending on level of turbidity in your Raw Water.
• this water filter candle Suitable for 10 'Pre-filter housing having Plain cut inside its cap. Easy to install,self installation could be done. Supreme Quality: 90 Gram, 3 layer thick pp spun filter. Capacity: 60000 liters Reduces dirt, sand, salt, rust and scale particles. Best Suited for all types of water purifiers, RO/UV and RO Service. Package Contains: 5pcs Spun Filter (10 Inch, White), 1 Spanner

• Floaty Water Level Controller WLC Square Head Float Switch Wired Sensor Security System Wired Sensor Security System
• Rated voltage: AC 125/ 250V & Rated MAX current: 16(4)A/Contacts: NO+NC & Weight
• Cable: 2,3,4,5 Meter (i.e. customize wire length is available)/ A float switch is a device used to detect the level of liquid within a tank.
• Use: Water Level, liquid level Controller etc,
• The switch may be used in a pump, an indicator, an alarm, or other devices

• Water Level Controller
• Circuit
• 30 AMP

• SS pin moulded within Polypropylene.
• Cable Length: 1.5 Meters.
• Completely insulated wire joints.
• SS-316 pins are used in it to avoid the rust and chemical resistant.
• US standard Tin Plated copper wire

• Indiacate level of tank
• Save Electricity
• Brust Free SS Sensor
• Save Water

• Cable Length: 1.5 Meters
• Completely insulated wire joints, No Leak Problems
• No Maintenance
• US standard Tin Plated copper wire

• Indiacate level of tank
• Save Electricity
• Brust Free SS Sensor
• Save Water

• Motor Wattage: 7A@230V
• AC Single Phase (Upto 1HP)
• Garrenty: 6 Months (WA - 9096761530)
• Sensor with Cable 1 Meter
• Suitable for Self Priming Pumps
• Auto Manual Mode