Electricals Store - Home Improvement Tools & Testers

• Tests phase orientation of 3-phase power sources
• Indicates phase orientation (clockwise or counter-clockwise) and whether each of the three phases is live
• LEDs display motor rotation and phase status
• Easy to open alligator clips with wide jaws
• Includes color coded sillicone cables, alligator clips, battery and soft carrying case

• Designed to pinpoint engine problems; tests alternator diodes, duty cycle, solenoids, breaker points, wiring, switches and more
• Features auto-ranging, auto shut-off and over-load protection
• Measures up to 15 amps for device testing
• 10 MegOhm input impedance; safe for electrical and automotive use; prevents damage to the vehicle's ECU
• Includes temperature probe, inductive RPM clamp and carrying case

• Best Quality
• Electronic Specialties

• Quickly and easily traces various types of cable including electrical wire, twisted pair, LAN cable, multi-conductor cable, telephone cable, alarm cable and more
• Fox 2 is a multi-function Toner that generates multiple tones, performs some basic telephone line tests (loop mA and line polarity), and provides a visual and audible continuity test
• Fox 2 integrates Triplett TrueTrace cadence shift for definite ID of cable or pair within cable
• Hound 3 is a lightweight Probe, with a thumbwheel sensitivity control and signal strength indicator LED
• Hound 3 can detect trace tones up to 12\" away and features LEDs to light up dark areas and reduce fluorescent light noise

• It can generate \"Active\" signals for components, such as lights, motors
• display the parameter curve diagram of the tested component, such as voltage, frequency, time

• An accurate, reliable and easy-to-use Digital Earth Tester. It has high stability and reliability.
• Extra Large and Clear 3. 5 inch LCD Display, easy to read.
• It has strong anti-magnetic, anti-jamming function, over range and low battery Indication.
• Full function protection, anti high voltage circuit design
• With dust proof and moisture proof structure, it is better suited for field operation.

• CLEAR COLOR LCD DISPLAY: Circuit Analyzer with large color LCD provides easy-to-understand results for wiring faults, AFCI, GFCI, voltage drops, and device trip time
• COMPREHENSIVE WIRING FAULT DETECTION: Detect and identify common wiring faults in standard, AFCI, and GFCI electrical outlets, ensuring thorough evaluation
• DUAL WIRING FAULT DETECTION: Capable of detecting dual wiring faults, including open neutral and open ground, enhancing safety measures
• AFCI AND GFCI DEVICE INSPECTION: Inspect AFCI and GFCI devices, measuring trip time and trip current for accurate functionality assessment
• LOAD TESTING CAPABILITIES: Conduct 12A, 15A, and 20A load testing to measure percentage voltage drops, providing valuable insights into electrical performance
• AUTO POWER OFF: Automatically powers off after 5 minutes of inactivity, conserving battery life and ensuring long-term usage
• DETACHABLE CORD: Detachable cord allows for easy storage, providing convenience and organized handling of the Circuit Analyzer

• Check the PING , POE and cross-talk functions for Network cable.
• Hunt the target cable from a bundle of cables , such as RJ11 / RJ45 / BNC.
• Under the situation of connecting Ethernet switches / router to find target cable.
• Locate the short circuit location for 2 cores cable.
• Wiremap the short , open , cross , reverse circuit for RJ11 / RJ45 / BNC cables .

• 100kHz Bandwidth voltage function
• Record MAX, MIN, MAX-MIN readings.
• Crest (Instantaneous Peak Hold) MAX, MIN, MAX- MIN readings.
• Relative zero mode.
• 500,000 counts high resolution stable reading mode.

• Test, map and identify up to 8 locations in a single step
• Cuts testing and identification time in half
• Includes: 7 Test-n-Map Remotes (#2 - #8), 8 threaded male to push-on female coaxial push-on F adapters, 8 RJ45 jumper test cables, Test-n-Map Remote Verification Test Cable (18-Inch), zipper bag
• Included jumper cables connect the Test-n-Map Remotes to wall outlets
• Use the Test-n-Map Remote Verification Test Cable (included) to conduct a validation test or another cable that is at least two feet in length
• Requires Klein Commander, Scout Pro LT or Scout Pro 2 Tester -- sold separately
• Zipper pouch holds all of the pieces in one place

• 20 prisms, large viewing hole
• Portable cryptic tester can measure the position of the near and far eyes
• Inspection range 20

• 4 Digits LCD, 32mm Clamp Jaw Dia, Data Hold, Open Clamp Jaw Indication
• Range 0.01 to 1500?. Maximum Resolution 0.001 Ohms
• With Leakage Current Measurement up to 20A; Storage of 99 Measured Data; Data Hold, Auto Power Off
• Current range:0.00-20.00A; Resolution: 0.05mA; Auto Ranging
• Setting of Resistance Alarm Critical Value: 1 199 Ohms; Setting Range of Current Alarm Critical Value?1-499mA

• The DM90 measures voltage, current, frequency, resistance, continuity, diode, capacitance, and temperature allowing you to verify problems with accurate readings
• The DM90 is a feature-rich multimeter with LoZ and VFD modes, ?a measurement, smart/classic diode modes, min/max/avg, peak min/max, hold, auto hold, and auto power off with disable.
• Powerful LED work lights eliminate the need for a flashlight while a digital LCD display and intuitive, simple-to-operate user interface make the DM90 an ideal tool to have in the field
• Includes DM90 digital multimeter, TA84 test lead storage and tripod adaptor, TA70 cat IV, alligator probes (slip on), and TA60 thermocouple adaptor with type K probe

• 3 Phase Indication
• Indication of Phase Rotation
• Indication of Motor Rotation Direction
• Contact Free Determination of the Rotation Direction of Running Motors