Indian Construction Industry

BTMETER

Home Improvement Tools & Testers

Contact
For Trade

Home Improvement Tools & Testers By BTMETER

BTMETER BT-580P Multimeter Auto Ranging Multi Tester - Product Features
  • BTMETER BT-580P Multimeter Auto Ranging Multi Tester
 
BTMETER BT-770K Auto Ranging Automotive Multimeter for Dwell Angle Pulse Width Tach Temperature Duty Cycle Voltage Current Resistance Test - Product Features
  • Multi-function Measure AC DC Amperage to 20A, AC DC Volt to 750V~1000V, AC DC Ohm to 60M?, Capacitance to 60mF, Temp -4~1832?, Frequency 9.999MHz, Duty Cycle, 3/4/5/6/8 Cylinder Switchable, 0.1ms~10.0 ms pules width, 600~12000RPM Tachometer and Dwell Test. BTMETER BT-705A Inductive Clamp for RPM measurement is NOT included
  • For Mechanics and DIYers High accuracy 6000 counts multi-tester features with PEAK Hold on MAX/MIN. Diode & Continuity Test, NCV and AC True RMS, ?/ switchable. With automatic zero adjust and overload protection on all ranges, 10 M impedance.
  • Large LCD Display This voltmeter using the words 20mm, 3.0 inch LCD display with Auto backlight sensor makes it convenience for troubleshoot car engine battery and electric problems in dim place. Auto OFF after 15 mins with no operation
  • Hands Free Magnetic attachment on metal surface, Hanger, Kickstand to set your hands free, and auto backlight, led light in the knob allows your see the range and measurement clearly, especially when working under your vehicle or in the dark.
  • Temperature Test Comes with thermocouple for water tank, Auto Manual Ranging Switchable. Includes zipped carry case which easily holds all the multimeter accessories, life time tech support, and 12 months warranty
 
BTMETER BT-770S Multimeter Manual Ranging Electric Meter, for AC DC Volt Amp Ohm Capacitance Frequency with Continuity Tester, Auto Backlit for Automotive Hobbyist Electrical Home - Product Features
  • Must Have Accurate Multimeter - 6000 counts accurately measure AC/DC voltage, AC/DC current, resistance, frequency, continuity, diode, hFE,with thermocouple to measure the temperature,NCV,etc.
  • Multifunction Voltmeter - The digital test meter can be used to measure high precision range than other.Automatically turn on bright backlight and indicator light on the dial when darkness.Data hold,low power indication and auto shut off to save your battery.
  • Troubleshoot electrical problem - Turn the rotary switch to the NCV gear of the voltage meter and close to the lead being measured,buzzer will alarm,in order to make sure circuits were alive in the house.Safely and Accurately to check household electrical problems.
  • Double Protection -This digital avometer is built in two fuse tubes. The fuses can protect the multimeter effectively, which gives you double protection.And protective rubber sleeve around the Ohmmeter adds extra drop protection.It is more secure and reliable.
  • What you get -You will have 1 x TRMS digital multimeter with 9V battery , 1 x test lead, 1 x thermocouple temperature probe, 1 x Crocodile clip, 1 x Protective bag,1 x user manual. 100% Guarantee for 365 days to let you buy this digital multimeter confidently.
 
BTMETER BT-705A Signal Pick-up Inductive Clamp Lead, Measure Tach Range 300 RPM ~ 1200 RPM - Product Features
  • Important Note This Signal Pickup needs to be used with multimeter or oscillograph for tach RPM measurement for vehicle engine. It's recommend to use it with BTMETER BT-770K, BT-90K, BT-6688D automotive multimeter.
  • Great Companion to Automotive DMMs Features with standard 3/4 inch banana plugs, which means makes it compatible with most automotive meters that features with signal input.
  • Inductive Pickup Leads for BT-770K BT-90K Perfectly work with BTMETER automotive multitester, such as: BT-770K, BT-90K, BT-6688D. To measure secondary end conductors of high voltage ignition coil spark .
  • Easy to Use Clamp the spark plug wire with the mark on the inductive pickup tool pointing to the spark plug for engine speed measurement.
  • Notice in Measurement The distance between the spark plug and the clamp of the instrument must be less than 3.93 inch (10cm) during test, and the ignition frequency of the engine ignition system must be between 10Hz and 400Hz
 
 
If you have a business establishment in india,

Contact us

to list your business related to any construction categories.
 
Construction Events
To Know more about the events about Air Conditioners, Basements, Bathrooms, Bedrooms, Cabinets, Decorating, Design Plans, Doors, Electrical Lightings, Flooring, Home Security, Kitchen, Landscape, Painting, Plumbing, Fixtures and many more..
 
 
Facebook Twitter Instagram LinkedIn
© 2007 - IndianConstructionIndustry.com. All Rights Reserved
Home  |  Overview  |  Advertise  |  Link to us  |  About us  |  Contact us  |  Sitemap  |  Privacy Statement