Home Improvement Tools & Testers By Henkion

• IP Camera Tester Network camera tester support max 12MP 4K H.265/H.264 IP PoE Camera test.Powerful network tools to help you detect and set various network parameters.Support PoE IEEE802.3af/at 48V, max 25.5W, RS485 PTZ control, Baud 600-115200bps, compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic etc.
• Auto HD Coaxial Camera Test Auto recognize HD coaxial camera type and resolution,snapshot video record and playback zoom, cmaera OSD menu control over and coaxial PTZ .Built-in \"Auto HD\" APP can automatically recognize the camera type when viewing HD AHD / TVI / CVI / SDI cameras.Support up to 8MP AHD CVI TVI SDI camera and CVBS camera testing.The unique SDI camera test function is not available in other models.
• Cable Tester RJ45 cable TDR UTP test: it tests cable pair status, length, attenuation, reflectivity, impedance, skew etc.Measurement range 180 meter (590fts). Test UTP cable connection status and display on the screen.It can detect the near-end, middle-end and far-end fault points of the crystal head of the network cable.
• HDMI INPUT & VGA INPUT HDMI HD input interface ,support 4K 3840x2160p 30fps signal input,supporting image display,record,photo and playback.VGA input interface ,support max 2048x21152P 60fps signal input.
• Power & Quality Assurance : Built-in 7.4V Lithium polymer battery , 3350mAh, after charging 3~4 hours, normal working time 5~8 hours. Input:DC12V 2A; Output:DC12V 2A, DC5V 2A; We tested every cctv camera tester before sent it,to ensure that you will not receive defective products.

• Connector Type : Multi-functional 800nm-1700nm wavelength fiber identifier with in-line macro-bending technology for non-destructive testing, which can measure signal direction and power to avoid misuse leading to line interruption.
• Multi-function : Built-in 2mW VFL function LED fiber optic identifier; no need to change adapter, low battery monitoring function, tone recognition and other functions.
• Fiber optic identifier is used to identify three commonly used signal frequencies, i.e. 2KHz, 1KHz, 270Hz; peak ringing echo will be emitted when the frequency is identified.
• Hidden Red Light Source The bottom cover of the fiber optic identifier can be opened. Stable and powerful spotlight hidden red light source can effectively cooperate with fiber optic detection.
• Ergonomic Design When holding the fiber optic identifier, press the trigger switch on the front with your index finger. Clamp the fiber and start the test automatically. Press down to clip the fiber.