Electricals Store - International Power Adapters

• TXS0108E Logic Level Module: VCCA side voltage range: 1.2V-3.6V; VCCB side voltage range: 1.65V-5.5V
• Bidirectional Communication: TXS0108E Module with High-Speed Full Duplex 8 Channel Logic Level Converter with the TXS0108E Chip which Provides Bidirectional Communication Capability
• 8 Channel: 8 Digit Bi-directional 3.3V-5V / 5V-3.3V Logic Level Converter Board, it can Bidirectionally Transfer with 8 Channels Between High Logic Voltage and Low Logic Voltage
• Easy to Install: Serial Communication Interface is Compatible with UART/IIC/SPI Port, which is Easy to Connect
• Wide Application: Logic Level Shifter TXS0108E Widely used for Communications:5V and 3.3V MCU Module; 3.3V and 5V MCU Module,It can also apply for the Level Conversion between MCU and SD Card, MCU and IIC/SPI Serial Port Devices

• Module Model:LM2596 Buck Converter + Voltmeter
• Input Voltage: DC 4.0~40V ; Output Voltage: 1.25V~37V; Output Current: 2A(normal and stable), 3A Max
• Cutting Size: 66mm x 35mm
• Measure Range:4~40V (for measure accurately, please ensure that the input voltage is more than 4V)
• Ripple Frequency: About 150Khz; Ripple Peak: About 100mV; Voltage Meter Error: ?0.1V

• Type: 150mil SOP8 IC Socket(IC width about 3.81~3.99mm) and 200-208mil SOP8 IC Socket (IC width about 5.13~5.33mm)
• Usage: Programmer, Test Block, Write and Test SOP8 Chip.
• Suitable for programmer (1.27mm pitch) and all SOP8 IC chips.
• It's easy to to install and operate.
• Professional design, gold plated pins, high performance and durable.

• Charging and discharging: 134N3P has built-in charging and discharging power MOS, the charging current can be set, the maximum charging current and maximum discharging current are 1A.
• Safety protection function: Constant over temperature protection, overcharge and over discharge protection, output overvoltage protection, output overload protection, output short circuit protection, etc.
• Charge status indication: Charging- The red light flashes while charging; Red light is always on, charging is complete. Discharge- The blue light flashes.
• Application: Batteries like Polymer ,18650 Lithium ,Cell Phone ,Tablet and MP3 Battery ect.
• Note: To connect with lithium batteries, it can only be connected in parallel with a voltage of 3.7-4.2V, not in series.

• The high-voltage module is made by using the tesla coil principle, and outputs high-voltage pulse high-voltage current, small volume, high efficiency, simple peripheral circuit (just need to connect the switch, the battery can be) the discharge intensity is fierce.
• About 20kv boost step up power module the power supply: you can use a single 3.7V lithium battery or two series, such as 18650 battery, idle mobile phone battery (to remove the protection board, recommended capacity above 2000mAh).
• The input voltage of the arc generator is dc 3.6-6V and output dc 20000v high voltage, input wiring: red - positive; green - negative; output wiring: the other side same color cable.
• 20kv boost step up module can be used as high-school scientific experiments, electronic devices, negative-ion generator, high-voltage source, to use when small science.
• The high-voltage module should avoid the use of high-voltage current without a load. Power must be set to a suitable distance to the high voltage output line, the battery capacity is proportional to the distance and the use of the high pressure arc (not a voltage as high as possible, must provide sufficient current).

• Mini DC-DC voltage Converter Board : Micro USB voltage input, DC 2-24V input and 5V-28V output,connected with USB power adapter then you can get 9V 12V 18V 24V voltge.
• Maximum Output Current : 2A, Board Size: 30 X 17 X 14mm/1.18 X 0.67 X 0.55inch(L*W*H),high power conversion efficiency up to 93%.
• Protection Mechanism : MT3608 includes under-voltage lockout, current limiting, and thermal overload protection to prevent damage in the event of an output overload.
• Widely Used :For storage battery, power transformers, DIY adjustable regulated power supply, industrial equipment, 5V, 9V, 12V, 28V output, etc.
• Method of use : The module of the IN+ and - after 2-24V, IN adjusting the potentiometer can adjust output voltage, output voltage is greater than the input voltage

• Parameter Introduction Input voltage range: 10-32V; output voltage: DC5V, total output current: 6A max; total output power: 30W max (USB cable length: 12.2 inches 31cm)
• Total Output 6A/30W max Can charge 2 devices at full speed at the same time, Each port outputs 3A/15W max.
• Multiple protection With input reverse connection, overvoltage and undervoltage protection, output overcurrent, overvoltage, undervoltage, short circuit and overheat protection?IP68 Waterproof protection
• Efficient conversion This DC-DC converter module has USB charging port and integrated switch thin regulator module, with stable performance and conversion rate up to 96%
• 30W high power use wide Solar panel to charge cell phones, car charging transformation, car recorder power supply, home power, DIY and other 5V electronic devices

• Input voltage:DC 12V/24V
• Output voltage: DC 5V; total output current: 6A Max; total output power: 30W Max; Each USB Port Output 3A/15W Max
• Our 12V/24V to 5V step-down converters with screw holes are designed for easy mounting on a dashboard or other surface.
• High conversion efficiency: up to 96%, stable and reliable performance
• With input reversal, overcurrent, overload, low voltage, overheat and short circuit automatic protection, automatic recovery

• LM2596 Buck Converter Module with voltage display function, the displayed accuracy is 0.05V, range is 0 - 40V.( Note: in order to voltage display more accurate, please ensure that the input voltage is higher than 4V).
• Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage; The nixie tube can be turned off by another button. Mentioned in these states are able to be memorized, is not lost even if the power is disconnected.
• Continuously adjustable output voltage range of 1.25V -37V, 4-40V input voltage range.(The input voltage is at least high than the output voltage of 1.5V).
• Buck converter 24v to 12vHigh efficiency,150 kHz fixed frequency internal oscillator.
• Output current: 2 A continuous output. Output power: the maximum 15 w. ensured 3A output load current, current limit protection, and thermal shutdown.

• High quality: 3.1inch (M8) stud design high current terminal block. Easy to install and flexible to use.
• Package includes: 2 x Battery Terminal Stud Connector (Black x 1; Red x 1)
• This product can widely used in the separation and distribution of welding machines, trucks, charging generators, ships, automobiles, solar cells.
• Made of High quality copper with red and black mark, used to connect two or more connectors / wires, as remote battery junction post for battery power and ground junction.
• Please feel free to contact us if have any product question. ZZHXSM will provide the best service.

• The Compact Cube Universal Travel Adaptor from Monoprice ensures that you can plug any device into any power socket
• This is a blade adaptor in that it allows you to adapt the plug blades of any device to that of the local power wall socket
• The face of the adaptor accommodates two- and three-bladed power plugs from the US UK EU Australia and China

• Highly Stable Performance: This AC 10-28V to DC 12V Buck Converter features highly integrated SMD components that offer exceptional stability and reliability. The integration of numerous surface-mounted devices on a small footprint ensures a robust product that is well-equipped to handle the power supply needs. The stable power output enhances the functionality of any device connected to this converter, making it a sturdy choice for your power conversation requirements
• Safety Enhanced Design: Safety is an integral of this converter's design. The product is housed in flame-retardant plastic, which substantially reduces the risk of fire-related accidents. This trait, coupled with its inbuilt overvoltage, overcurrent, and short-circuit mechanisms, ensure that it provides a consistent power output undeterred by fluctuations, thereby ensuring the safety of your devices
• Built for Tough Conditions: With its IP67 rated waterproof and dustproof design, this DC 12V converter is designed to easily adapt to various working environments. Whether you're using it in a dry, dusty environment or a wet, humid area, the converter consistently delivers high performance. This toughness enables it to withstand challenging conditions and continue to provide the stable power required for your devices
• Versatile Functionality: The AC 10-28V to DC 12V Buck Converter is suitable for a diverse range of appliances. From car screens and monitor cameras to fans, water pumps, motors, and routers, this converter is compatible with any device that requires a stable and sturdy DC power supply. Its wide applicability makes it an ideal choice for both personal and professional use
• Efficient Power Conversion: The converter offers an impressive conversion efficiency of 96%, making it a highly energy-efficient choice for power supply needs. By minimizing power loss during conversion, it ensures that your devices get maximal power, thereby improving their performance and longevity. Choose this converter for a more sustainable and efficient solution to your power needs

• Size: 3.1 x 1.5 x 0.55 mm / 0.12 x 0.06 x 0.02 inch (L*W*H); Tolerance: 5%; Package Model: 1206; Package Type: Surface Mount Device; Resistor Value: 0R-10M; Resistor Power: 1/4W
• Advantage: With stable electrical performance design, durable and strong shock resistance, strong anti-interference ability and high frequency characteristics, giving you a comfortable working experience.
• Instruction: Easy to install, suitable for Surface Mounted Devices, can effectively maintain the normal operation of the machine.
• Application: The 0603 chip resistor is a useful electronic accessory that can effectively protect the circuit and data transmission to prevent breaking to external equipment. Widely used in a variety of technology equipment such as projector equipment, computers, meters, household appliances, personal digital assistant, communication devices and mobile hard disks, etc.
• Note: Please note that your device needs to be compatible with the chip resistor's package type and use it in the appropriate temperature range.

• DC 3V-4.2V boost 2000V, pulse boost module.It can work continuously and the maximum discharge distance is about 1.5MM. Dimensions: 41x26x19mm/1.6x1.0x0.74inch.
• Input voltage: 3V-4.2V;Input Current: Max 2A;No-load current: 130MA(at 4.2V);Output voltage: 2000V (low battery voltage, low output voltage); Output current: 0.5~1mA(the external parallel capacitor can increase the output current).
• The output of 3V voltage input is about 1500V, the output of 3.7V input is about 1800V, and the output of 4.2V input is about 2000V. The output circuit is doubler rectifier. With high-voltage discharge capacitor, 2000V 223 (0.022uf). Note: This Module has a high voltage capacitor, the capacitor may be used after the remaining power. High voltage output, pay attention to safety when using.
• This is a high-voltage, low-current, low-power boost module. If you want to increase the instantaneous discharge current, you can output a large capacity, high-voltage capacitor in parallel (recommended four air-conditioning compressors CBB65 capacitor, 450V series use, capacity size according to your needs to choose).
• Usage: Popular science experiment, electronic instrument, negative ion generator, scientific small-scale production, etc. Note: The board has a high voltage capacitor, which may leave surplus electricity after use.High pressure danger, use need to pay attention to safety.