Industrial & Scientific Store - Additive Manufacturing Products

• esun
• Filaments
• 3D Printing
• 3D
• Printing

• DRV8825 Stepper Motor Driver Module.
• The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough.
• Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
• 45 V maximum supply voltage.
• Simple step and direction control interface.

• Crafted with care
• It is designed keeping your choice and requirement in mind
• Hassle-free usage

• Shaft: 5mm x 6mm
• Length: 25mm; Material: Aluminium
• Outer Diameter: 20mm
• Suitable for Nema 17 Stepper Motor or any motor having 5mm shaft.
• Package Include: 4 x Shaft Coupling

• Plastic nuts knob, used for heat bed of 3D printer.
• Easy to use and operate.
• Material: Plastic; Color: Black
• Thread: M4
• Features: Female Thread, Easy to Use, Nut Leveling

• Single input Single nozzle RepRap 3D Printer bowden print head 1.75mm / 0.4mm
• For good printing result there is small PTFE tube in hot zone
• Assemble Heater / Cartridge and thermistor as per your requirement to complete the Hotend assembly
• Please note heater and thermistors is not part of this assembly
• Use it with 4mm OD 2mm ID bowden line tubing

• Material: ABS
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 10 meter; Diameter: 1.75mm
• Color: Blue ; Temperature; 240 degreeC - 260 degreeC; Heatbed Temperature: 80 degreeC (min)
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Nema17 Stepper Dampers are used to decrease noise and resonance in your CNC and 3D Printer, eliminating vibration and effectively improving 3D printing quality
• Used per Stepper or Electric motor
• 3D Printers observed 5-10dB reduction in noise when used on X and Y Axis steppers with the vibration damper for nema 17
• Works on both Cartesian and Delta style Additive Manufacturing machines such as CR-10 etc Pair these with good filament for the best results in your 3D printer and remove vibration and noise
• Qty: 4 pcs

• Material: PLA
• The filament is for 3D printing pen used to melt plastic at a high temperature
• Length:30 meter; Diameter: 1.75mm
• Color: Green; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 1-5mm deviation due to manual measurement.

• Material: PLA
• The filament is for 3D printing pen used to melt plastic at a high temperature
• Length:30 meter each; Diameter: 1.75mm
• Colour: Pink, Green, White, Orange, Blue; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's colour may be slightly different from the pictures. Please allow 1-5mm deviation due to manual measurement.

• Works well with Anet A8 3D printer.
• Pretty solution for auto-adjusting heatbed level.
• 10-30V DC working voltage, output NPN.NO
• Anti-jamming three-wire, 140cm / 55.1in cable length
• Comes with mounting plate & screws, pre-soldered connector.

• Say Goodbye to Poor 3D Printing by Wet Filament Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.
• Personalized Temperature Setting The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35~55. Suitable for more than 20 kinds of 3d printing filament commonly used in the market
• Personalized Drying Time Setting The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect.
• Compatible with 99% of 3D Filament Spools A: Maximum capacity of SUNLU dry box is ?210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc.; C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm.
• User-friendly Design&1 Year Guaranteed After-Sales Service A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing
• Importance of Filament Dryer Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament.

• Description: Item Name:40 Teeth Mk7 / Mk 8 Brass Planetary
• Gear Wheel Specification:5mm*11mm*11mm Material: Brass Weight:2g The number of teeth:40 teeth Higher stability than me
• t:2g The number of teeth:40 teeth Higher stability than metal gear. Also Suitable to other 3D Printers Package Included: 5PCS Brass Gear Wheel

• 10 Colors 3D Pen Filament Refills 1.75 mm PLA Pack is best suited to craft your imagination into reality
• PLA extact from corn. It is degradable and environmental protection. The material is very hard. The surface is bright and smooth.
• Smell Less and not curly. Not warped when printing print temperature :200-240.

• Material: PLA
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 10 meter; Diameter: 1.75mm
• Color: Natural Transparent Clear; Temperature; 190 degreeC - 210 degreeC; Heatbed Temperature: 60 degreeC (min)
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.