Industrial & Scientific Store - Additive Manufacturing Products

• New Upgrade of SKR 2 BIGTREETECH SKR 3 mainboard is the upgrade version of SKR 2. Its processor is upgraded to 32-bit 550MHz ARM Cortex-M7 series STM32H723VGT6.The running speed and printing accuracy of SKR 3 controller is greatly increased by 30%+ while its working noise become lower.
• Robust Power System SKR 3 controller board is equipped with TPS5450-5A power chip, which supports power input of DC12/24V and output current of 5A (peak output 6A ). With its robust power system, SKR 3 motherboard can firmly will be the perfect supporter for your Raspberry PI.
• DIY Friendly Interfaces BOOT0 is added for programming firmware in DFU mode. WIFI module (ESP-12S, ESP-07S, ESP32) enables you to easily debug RRF. SKR 3 motherboard also supports bltouch, resume printing function, RGB lights, blocking detection and shutdown after printing function. What's more, it's also compatible with TFT35 E3 V3.0/TFT35 V3.0/TFT28 V3.0/12864 LCD display as well as TMC2209, TMC2208, TMC5150, DRV8825 stepper motor drivers.
• Thermistor Protection Design Adding protection circuit for the thermistor to avoid burning of main control chip caused by hot bed or heater creepage. The resistance value of thermistor of SKR 3 also supports PT1000 by wire jumper to select pull-up resistance value. In this way, it's convenient for DIY by eliminating the connection of external module.
• About Firmware SKR 3 mainboard is directly compatible with Marlin and Klipper firmware (RepRapFirmware need to debug first). Firstly download firmware on GitHub website of name ?firmware.bin\", copy and save it to SD card, firmware must bed reserved, then re-plug the SD card and wait to 10s. When the status indicator stops flashing and the file name in the Micro SD card is renamed to \"FIRMWARE.CUR\" then update sucessfully. Note: Our control board come without SD card.

• Why use EZ Drivers Because 40% of users have damaged the driver due to the wrong installation. It will damage the control board or even more damage. Using EZ Drivers can improve the experience of more users
• SKR 3 EZ 3D Control Board adopts two kinds of driver sockets, which are compatible with both BIGTREETECH EZ series driver modules and TMC series driver modules. Each motor drive module can select the corresponding motor voltage through the jumper cap
• SKR 3 EZ mainboard using 32-bit ARM Cortex-M7 series STM32H723VGT6 main control chip with a main frequency of 480MHz, the performance has greatly improved. It reserves the BOOT button, users can update the motherboard boot program through DFU
• SKR 3 EZ's numerical control fan realizes 24V, 12V, 5V voltage selection through the external power supply module, eliminating the need for the operation of the customer's external transformer module, thereby reducing the probability of damage to the motherboard
• EZ Drivers can achieve quietness when the motor is locked and running at low speed. It is recommended to select when the maximum motor speed is lower than 300RPM; it can achieve quietness and low power consumption in a wide range of speed and torque. It is recommended that the maximum motor speed exceeds 300RPM Select at 300RPM

• 1. Effectively Stop 3d Printing Fume Or Odor Affect Your Nose And Health ! The enclosure with excellent airtight performance, can insulate the smell emit from 3d printer resin or melted filament in time, then extract the smelly air out quickly by ventilation system.No more nasty fumes in the working room!
• 2.Enhanced Warming Affect,Contribute To Better Printing Quality And High Success Rate.When Print ender-3 with ABS filament (nozzle 240 degree C,bed 110 degree C, room temp.27 degree C),20-30 min. later, interior temp. could go to 41-42 degree C, with this constant temp., print object not easy wrap on bottom or crack between layers ; print an epax 10.1 inch mono LCD printer, at room temp.27 degree C, enclosure can go up to 33-35 degree C, which means allow resin flow faster, especially in cold days,this enclosure will help to print better
• 3.Multifunctional Usage. Excellent warming affect with exhaust fan make the enclosure to have unexpected Dryer function, when test ender 3 to print ABS filament, the inner humidity is 65%, 20 minutes later, interior humidity drop to 34%(with exhaust fan on), for long time,humidity would low to 26%. This enclosure also could be a Dust Cover , Waterproof Tent, UV light shelter and can reduce working noise.
• 4. Easy to install & Convenient to Use . Assemble the enclosure just like a simple tent; with lighting bar and observation window, easy to watch printing progress; the window made of dark transparent material,all zippers are air tighten ,so allow LCD printer working without acrylic cover and allow resin inside without been cured for long time storage; both side with exhaust fan seat,free to arrange extract direction according to need; the valve for anti backflow help easy to install vent on wall
• 5:Wide Compatibility .Small version Inner size W18.9\"*D23.6\"*H28.3\"(48cm*60cm*72cm), can compatible for most LCD printer under 13.6 inch and FDM 3D printer size like Ender 3

• Overall length:349mm, Length of aluminum section?300mm
• Effective stroke:300mm-77.15mm=222.85mm
• Flexible coupling size:D20 L25-8mm to 6.35mm Plum coupling size:D20 L25-8mm to 5mm
• Lead:8mm ( The lead screw moves 8mm in one turn)
• T-type screw length : 340mm

• HIGH QUALITY: The Diamondback Science team has been developing world-class diamond products for the energy industry for more than 40 years. Members of the team recently developed a proprietary Polycrystalline Diamond (PCD) nozzle to be used in 3D printing that can handle the most challenging applications! Easier to clean and reduces tip clogging, improves layer adhesion, has a solid diamond tip, any filaments, longer life, lowers operating temperature, and delivers unmatched wear resistance!
• PRECISION PRINT: Our nozzles rely on a solid diamond tip to improve precision 3D printing. The tip is not a diamond coating, but rather a solid diamond substrate made of polycrystalline diamond. Not only is our diamond the hardest material in the world, but it also provides best-in-class thermal conductivity, or heat transfer capability. Easily transfers heat from the hotend through the nozzle and into the filament--ensuring more precision printing and better layer adhesion on every print!
• ANY FILAMENT: Diamondback relies on a proprietary and patented diamond technology. This breakthrough technology allows 3D printers to print any filament on the same nozzle. A DiamondBack nozzle can easily print standard PLA and ABS filaments AND highly abrasive carbon fiber-embedded filaments without having to worry about changing out the nozzle! Also it allows 3D printing using PLA Copper, Iron, and Carbon Fiber!
• LONGER LIFE: The Polycrystalline Diamond (PCD) used in every DiamondBack nozzle will significantly extend the overall life of the nozzle. The extreme hardness, wear resistance, and thermal conductivity of this unique material make it an ideal solution for 3D printing. Delivers high thermal conductivity, low coefficient of friction, and high fracture toughness. Extends the tool life of other applications in other industries by 2 to 8 times the life of tungsten carbide and other hard metals!
• SPECIFICATIONS: It is recommended that DiamondBack Nozzle users follow the operating specifications provided by each 3D printer manufacturer and each filament supplier. DiamondBack Nozzle temperatures should not exceed 300 Celsius.

• Manufactured in-house by Prusa Polymers - We were not satisfied with the quality of filaments on the market. So we decided to make our own. As a part of Prusa Research companies group, we are the only 3D printer manufacturer with its own filament production.
• Premium-grade materials and thorough testing - The whole manufacturing process is closely monitored and tested string diameter, color consistency, and mechanical properties to make sure that every spool is perfect.
• High Quality you can check yourself - We are the only manufacturer that gives customers the option to fully inspect parameters of every filament spool. Just scan a QR code on the spool to see all details online.
• 0. 02 mm Manufacturing Precision - We believe the industry standard of 0. 05 mm isn't sufficient for perfect 3D printing. Instead, we 0. 02mm precision and highly-consistent colors in our filaments.

• Specially formulated for very large printers but works great with printers large or small
• Great for making miniatures
• Very stable resin and can tolerate more background light
• Has wider light tolerance range and great for mono screen LCD printers
• ABS-like performance. Hard with great toughness.

• PEI Powder Coating: PEI steel plate adopts PEI powder coating, the hardened steel spring plate is not easy to deform and can be used for a long time.
• Double Sided Texture: Double sided texture is the same, can be used on both sides, high temperature resistance.
• Auto Leveling: No need for solidity glue or different consumables to replace the hotbed, enhanced auto leveling sensor sensing.
• Simple Operation: Easy to remove by bending and popping, easy to maintain, easy to take the mold, repeated use, easy to operate.
• Uses: The printer nozzle can print models directly on double layer textured PEI powder steel plate.

• PACK of 2 The 20\" x 20\" (508mm x 508mm) 3D Printer build plate is fully matches heated bed for large format printers such as the Creality CR-10 S5 with large build areas. And you can also cut to any size as 330mm*330mm, 300mm*300mm, 260mm*260mm, 254mm*254mm, 220x210mm, 6.56\"x10\" .5\" and more.
• High Quality Material High strength and heat resistance (up to 240 degree C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production.
• Easy to Install and Remove Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry.
• Fully Compatibly This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results.
• SATISFACTION GUARANTEED We're so confident that you'll love these premium print surfaces, that we offer lifetime technical support and 24 hours professional customer service.

• SPEC & PROPERTIES: Volume - 1kg per bottle
• XY PLANAR RESOLUTION: 0.047 mm Layer Height / Parameter: 10 sec @ 50 um, Delay 3
• APPLICATIONS: Perfect for Creating prototypes.
• EASY TO CLEAN: To clean the printed models, all you need is an air gun and alcohol spray.
• CUSTOMER SERVICE: Phrozen regards customers with the utmost priority.Our professional engineering team is willing to reply your questions and support you to print with high performance.

• Package include: iMetrx Nema 17 Stepper Motor 42-40 Ender 3 Extruder Motor with 1Meter Wiring x5pcs
• iMetrx Nema 17 Stepper Motor has high torgue and stronger power (20-25% higher than normal motors) and a lower resistance value to reduce heating.
• iMetrx 3D printer motor 42-40 has a stable internal structure which enabled the stepper motor to provide low noise.
• For Ender 3 Extruder Motor DC 1.5A-5V, 2 Phase, 4 Wires, 1.8?0.09 Deg., 440mN.m, compatible with all FDM 3D printer that need Nema 17 Stepper Motor 42-40.
• iMetrx stepper motor have durable bearing for long time use.

• Neatly Arranged and Smooth Printing: 3D printing PLA filament is neatly arranged through fully mechanical winding and has less tangled lines and easy to use, can avoid possible wire pulling, twisting or breakage, which will make your printing smoother
• Quality PLA Filament: 3D printing filament bundles are made of quality PLA materials, no clogging and no bubble, no jamming and no warping, will bring you a smoother and more stable printing experience, increase the sophistication of your 3D printed objects
• Vibrant Color Filament Bundle: you will get several spools 3D printer PLA filament 1.75 mm in 6 colors, 0.25 kg per spool and total of 1.5 kg, the surface of the printing filament is very smooth and shiny, you can create prototypes, functional parts, art pieces, and more with ease
• High Compatibility Filament: 3D printing PLA filament is of 1.75 mm diameter while the accuracy is of +/- 0.02 mm, perfectly compatible with most of the 3D printer and 3D pen
• Wide Temperature Range: our 3D printer filament 1.75 mm is capable of handling printing temperatures between 190-220 degree C, suitable for a wide range of print bed temperatures from 0-60 degree C, offering flexibility in your printing process, whether you're printing intricate models or functional parts, it delivers consistent performance

• Print at speeds greater than 60 mm/sec
• Impact resistance: 84% > ABS
• Industry leading toughness and durability
• Shore Hardness = 95A
• Suggested Applications: seals, plugs, hinges, sleeves & snap-fit parts

• Model Name: CNC All Metal SherpaMini Extruder with 36mm Brand Pancake motor. High-quality accessories, high precision, high temperature resistance.
• Well machined: Adopt CNC hollowed out All Metal shell, good strength, not easy to deform; lightweight design, less inertia compared with the oridinary one.
• Kindly Note: Modify E-axis step value of the extruder, for example: the E-axis step value of Ender3 is 870. (1) The Max driving Current is 1A, recommend to use at about 0.8A to prevent motor from overheating. (2) For MarlinFirmware with 36 motor(8 teeth), modify the Extruder Pulse==Method 1: Modify pulse by firmware: #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 870 }. Method 2: Send G code (sent by slicing software command): M92 E870 M500. If motor(10 teeth), change Pulse Value: 691.
• Features: Moons 36 motor with 8 tooth gear, good thermal control ability, large torque; High-quality harden steel helical gears with nano-coating, wear-resistant, good precision and long life; Insert a metal joint for telfo tube, which can be adapted to more models no mater Short-range or Long-range distance.
• Applicable models: VORON2.4 series, CR-10, CR10S, CR-10 4S, CR-10 5S, CR-10 MINI, CR-20, ENDER-2, ENDER-3, ENDER-3 PRO, ENDER-3 V2 , GasherbrumK3, Prusai3 MK3 MK3S+ etc. It fits almost all FDM 3D printers if you can design the mounting bracket. Print model by searching Thing: 4974509 on thingivese.