Additive Manufacturing Products By FYSETC

• Upgrade Spring Steel Sheet, Gold, Both sides can be used. Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Comes with a soft magnetic base.
• Size: 410 x 410mm/16.14\", compatible with Crealty CR10 S4, RepRap X400, Raptor, T-REX and 2+ , T-Rex 3.0 and Raptor 2, Anycubi Chiron, Vorn Core XY or other same size hotbed/build plate. Not work with Anycubi Kobrra Max(429x410mm) !!!Please re-measure your build plate before ordering, Not rely on the build volume/printing size. If can accept the deviation 5-10mm against your heat bed, just buy it.
• Two-in-one type of PEI powder coated hardended steel spring sheet, not easy to get deformed. It behaves as most PEI sheets would and works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use.
• Easy to install, take off the back paper on the magnetic base, stick it to the heated bed, then align the steel plate on it. The model can be easily removed by bending the plate when the bed temp cools down, without the need for additional adhesives, tapes, or slurry. It is possible to add inductive Z probes and add ABL printers for certain objects that need to be upgraded.
• To clean, Just wipe down with isopropyl alcohol between prints for best results. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcohol.

• Model Name: CNC All Metal SherpaMini Extruder with 36mm Brand Pancake motor. High-quality accessories, high precision, high temperature resistance.
• Well machined: Adopt CNC hollowed out All Metal shell, good strength, not easy to deform; lightweight design, less inertia compared with the oridinary one.
• Kindly Note: Modify E-axis step value of the extruder, for example: the E-axis step value of Ender3 is 870. (1) The Max driving Current is 1A, recommend to use at about 0.8A to prevent motor from overheating. (2) For MarlinFirmware with 36 motor(8 teeth), modify the Extruder Pulse==Method 1: Modify pulse by firmware: #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 870 }. Method 2: Send G code (sent by slicing software command): M92 E870 M500. If motor(10 teeth), change Pulse Value: 691.
• Features: Moons 36 motor with 8 tooth gear, good thermal control ability, large torque; High-quality harden steel helical gears with nano-coating, wear-resistant, good precision and long life; Insert a metal joint for telfo tube, which can be adapted to more models no mater Short-range or Long-range distance.
• Applicable models: VORON2.4 series, CR-10, CR10S, CR-10 4S, CR-10 5S, CR-10 MINI, CR-20, ENDER-2, ENDER-3, ENDER-3 PRO, ENDER-3 V2 , GasherbrumK3, Prusai3 MK3 MK3S+ etc. It fits almost all FDM 3D printers if you can design the mounting bracket. Print model by searching Thing: 4974509 on thingivese.

• Newest All-Metal Sherpa Mini Extruder Shell Replacement part, NOT come with a Pancake motor. equipped with helical gear, made of die steel and nano coating surface, more stable transmission and longer service life than the ordinary spur gear. If need the full extruder with motor, please search sherpa at our store.
• Wide application: It's compatible with CR-10/4S/5S/MINI, CR10S,CR-20, CR-6 se, Ender-3/ 3Pro/ 3V2/3S1/3 Max, Vorn V2.4/ V0.1, Tev, designed for use with most FDM printers, If you have the suitable mounting bracket.
• Upgrades: One end has a teflon tube metal connector, which can be adapted to more models near and far.
• Advantage: CNC POM gear, reduction gear design, high transmission ratio to achieve greater extrusion torque

• Ender 5 plus PEI Print Bed: A upgrade Replacement printing platform-JanusBPS 377x370mm/ 14.84X14.56inch. This steel plate is Double-Side Coated, one side with Gold Powder, another with a Smooth PEI pre sticked, comes with a sticker base. It gives you two different experience on one plate just by flipping it over.
• Flexible, removable with High strength and heat resistance, can stick very well. Compatible with Ender 5 Plus or diy your own 3d printer.
• The double sides coated sheet is very easy to use, simply stick the bottom sheet onto your heated bed, then place the steel platform on the top.Both sides can be used to print, convenient. The pei sheet is pre-sticked by machine, no worry about the bubbles, please peel off the profective film on the pei surface before using.
• Most filaments, such as pla petg abs tpu can print directly on to the pei surface without the need for additional adhesives, tapes or slurry. Kindly note printing ABS needs a thermal insulation environment.
• The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.

• 1. A NEW Ender 5 Plus Build Plate Top Plate Only: 1PC 377x370mm/14.84x14.56in Smooth PEO+Textured PEI Flexible Removable Heated Bed Replacement Accessory, No magentic bottom sheet
• 2. Double sided Build Plate: One side textured pei powder(Gold) + another coated PEO sheet, gives you two Different experiences on one plate just by flipping it over. The matte texture makes it easier for the printing material to adhere to the surface, especailly for ABS. So does the smooth side. It leaves a Diamondlike finish inside with the beautiful-texture
• 3. Solution for first layer adhesion: **Do Not Sand on this PEO bed to avoid permanent damage.** No glue, No tap, Adjusting an Appropriate Z value is very important, if too low causing a filament buildup and easily scratch the print bed. Too high the prints come off the build plate, can't stick onto the hotbed. Key factors for a good layer: Turn OFF the cooling fan and Slow Down the speed to 10-25mm/s when printing the first few layers. A roll of Dry filament and Brims also greatly help
• 4. Wide 3d printing material Compatibility: The PEI Printing Surface can be compatible with PLA, PETG, TPU, ABS, PA-CF, WOOD and any other filaments. Perfect printing size works well with Crealty Ender 5 Plus. Different filament has a bed temperature setup, our testing result for your reference: PLA: 50-65 degree C, PETG: 70-80 degree C, TPU: 60-70, ABS: 90-100 degree C. For high-temp required filament ABS, we recommend to print on the Textured PEI surface, Not on the Smooth PEO side
• 5. Simple Installation and Use: A drop-in replacement for the stock glass bed. First install a magetic sticker onto the non-heated bed, then align this flexible spring steel onto it. The steel PEI plate can be magnetically bonded to the sticker. Then level the bed with auto bed leveling sensor. Easy to adhere the filaments to the printing bed. No need for tape and glue stick. Easy to remove the prints, slightly flex it repeatedly to pop your prints right off

• High quality printed parts for DIY your own Prus i3 MK3S+ 3D Printer.
• Material: PETG
• Beautiful Appearance: Orange + Black, classical combination.
• Easy to assemble: Well printed parts, the Assembly went without worries.

• A must-have spare parts Removable build surface: made of spring steel and smooth pei, coated pei, print bed surface, double printing side can meet your different filament need. The Smooth Side pre-applied a pei sheet leaves a glossy, reflective finish. The Textured-powder Side leaves a textured matte finish. Give you two different experience just by flipping it over.!!
• Easy to remove model: fit for most filament, like ABS TPU PLA PETG etc printing material. It is easy to move after bed cooling, no need adhesive or glue stick.
• Comes with magneticc sticker, Simply stick the soft sticker sheet onto your heated bed and place the flexible PEI build plate platform on it. The sticker bottom holds the flexible build plate very tightly. Once you have finished printing, remove the spring steel plate, flex the print off, and snap the pei plate back onto the sticker sheet. Prints are removed easily without any scratches or damage.
• The removable flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface with strength when heated, easy to releases them effortlessly when cooled. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, bends for easy removal of prints.
• Size: 244*264, please measure your hotbed before ordering,

• A upgrade Replacement printing platform-Round JanusBPS 270mm/10.6inch, compatible with Flsn Super Racer model. This steel plate is Double-Side Coated, one side with Gold Powder, another with a Smooth PEI pre sticked, comes with a magnetic base.!!!Please re-measure your build plate before ordering, not rely on its printing size area.
• Flexible, removable, can stick very well. The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! High strength and heat resistance. Both sides can be used to print, just flip it over, more convenient. The pei sheet is pre-sticked by machine, no worry about the bubbles, please peel off the profective film on the pei surface before using.
• Double sides can be used and easy to install: simply stick the bottom sheet onto your heated bed, then place the steel platform on the top. When you auto-level and mesh auto level with Kliper software on your PEI sheet, if it's done on the textured side, it will create fluctuations with the auto-level system since it is textured. ONLY using auto-leveling on smooth side PEI, everything will work perfect.
• Most filaments, such as pla, petg, can print directly on to the pei surface without the need for additional adhesives, tapes or slurry. Kindly note printing ABS needs a thermal insulation environment.
• Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it. Just wipe down with isopropyl alcohol between prints for best results.

• Upgrade Spring Steel Sheet, Gold, Both sides can be used. Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Comes with a soft magnetic base.
• Size: 410 x 410mm/16.14\", compatible with Crealty CR10 S4, RepRap X400, Raptor, T-REX and 2+ , T-Rex 3.0 and Raptor 2, Anycubi Chiron, Vorn Core XY or other same size hotbed/build plate. Not work with Anycubi Kobrra Max(429x410mm) !!!Please re-measure your build plate before ordering, Not rely on the build volume/printing size. If can accept the deviation 5-10mm against your heat bed, just buy it.
• Two-in-one type of PEI powder coated hardended steel spring sheet, not easy to get deformed. It behaves as most PEI sheets would and works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use.
• Easy to install, take off the back paper on the magnetic base, stick it to the heated bed, then align the steel plate on it. The model can be easily removed by bending the plate when the bed temp cools down, without the need for additional adhesives, tapes, or slurry. It is possible to add inductive Z probes and add ABL printers for certain objects that need to be upgraded.
• To clean, Just wipe down with isopropyl alcohol between prints for best results. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcohol.

• Model Name: CNC All Metal SherpaMini Extruder with 36mm Brand Pancake motor. High-quality accessories, high precision, high temperature resistance.
• Well machined: Adopt CNC hollowed out All Metal shell, good strength, not easy to deform; lightweight design, less inertia compared with the oridinary one.
• Kindly Note: Modify E-axis step value of the extruder, for example: the E-axis step value of Ender3 is 870. (1) The Max driving Current is 1A, recommend to use at about 0.8A to prevent motor from overheating. (2) For MarlinFirmware with 36 motor(8 teeth), modify the Extruder Pulse==Method 1: Modify pulse by firmware: #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 870 }. Method 2: Send G code (sent by slicing software command): M92 E870 M500. If motor(10 teeth), change Pulse Value: 691.
• Features: Moons 36 motor with 8 tooth gear, good thermal control ability, large torque; High-quality harden steel helical gears with nano-coating, wear-resistant, good precision and long life; Insert a metal joint for telfo tube, which can be adapted to more models no mater Short-range or Long-range distance.
• Applicable models: VORON2.4 series, CR-10, CR10S, CR-10 4S, CR-10 5S, CR-10 MINI, CR-20, ENDER-2, ENDER-3, ENDER-3 PRO, ENDER-3 V2 , GasherbrumK3, Prusai3 MK3 MK3S+ etc. It fits almost all FDM 3D printers if you can design the mounting bracket. Print model by searching Thing: 4974509 on thingivese.

• Ender 5 plus PEI Print Bed: A upgrade Replacement printing platform-JanusBPS 377x370mm/ 14.84X14.56inch. This steel plate is Double-Side Coated, one side with Gold Powder, another with a Smooth PEI pre sticked, comes with a sticker base. It gives you two different experience on one plate just by flipping it over.
• Flexible, removable with High strength and heat resistance, can stick very well. Compatible with Ender 5 Plus or diy your own 3d printer.
• The double sides coated sheet is very easy to use, simply stick the bottom sheet onto your heated bed, then place the steel platform on the top.Both sides can be used to print, convenient. The pei sheet is pre-sticked by machine, no worry about the bubbles, please peel off the profective film on the pei surface before using.
• Most filaments, such as pla petg abs tpu can print directly on to the pei surface without the need for additional adhesives, tapes or slurry. Kindly note printing ABS needs a thermal insulation environment.
• The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.

• Newest All-Metal Sherpa Mini Extruder Shell Replacement part, NOT come with a Pancake motor. equipped with helical gear, made of die steel and nano coating surface, more stable transmission and longer service life than the ordinary spur gear. If need the full extruder with motor, please search Asin:B0C3QGKQY6 at our store.
• Wide application: It's compatible with CR-10/4S/5S/MINI, CR10S,CR-20, CR-6 se, Ender-3/ 3Pro/ 3V2/3S1/3 Max, Vorn V2.4/ V0.1, Tev, designed for use with most FDM printers, If you have the suitable mounting bracket.
• Upgrades: One end has a teflon tube metal connector, which can be adapted to more models near and far.
• Advantage: CNC POM gear, reduction gear design, high transmission ratio to achieve greater extrusion torque

• 1. A NEW Ender 5 Plus Build Plate Top Plate Only: 1PC 377x370mm/14.84x14.56in Smooth PEO+Textured PEI Flexible Removable Heated Bed Replacement Accessory, No magentic bottom sheet
• 2. Double sided Build Plate: One side textured pei powder(Gold) + another coated PEO sheet, gives you two Different experiences on one plate just by flipping it over. The matte texture makes it easier for the printing material to adhere to the surface, especailly for ABS. So does the smooth side. It leaves a Diamondlike finish inside with the beautiful-texture
• 3. Solution for first layer adhesion: **Do Not Sand on this PEO bed to avoid permanent damage.** No glue, No tap, Adjusting an Appropriate Z value is very important, if too low causing a filament buildup and easily scratch the print bed. Too high the prints come off the build plate, can't stick onto the hotbed. Key factors for a good layer: Turn OFF the cooling fan and Slow Down the speed to 10-25mm/s when printing the first few layers. A roll of Dry filament and Brims also greatly help
• 4. Wide 3d printing material Compatibility: The PEI Printing Surface can be compatible with PLA, PETG, TPU, ABS, PA-CF, WOOD and any other filaments. Perfect printing size works well with Crealty Ender 5 Plus. Different filament has a bed temperature setup, our testing result for your reference: PLA: 50-65?, PETG: 70-80?, TPU: 60-70, ABS: 90-100?. For high-temp required filament ABS, we recommend to print on the Textured PEI surface, Not on the Smooth PEO side
• 5. Simple Installation and Use: A drop-in replacement for the stock glass bed. First install a magetic sticker onto the non-heated bed, then align this flexible spring steel onto it. The steel PEI plate can be magnetically bonded to the sticker. Then level the bed with auto bed leveling sensor. Easy to adhere the filaments to the printing bed. No need for tape and glue stick. Easy to remove the prints, slightly flex it repeatedly to pop your prints right off

• High quality printed parts for DIY your own Prus i3 MK3S+ 3D Printer.
• Material: PETG
• Beautiful Appearance: Orange + Black, classical combination.
• Easy to assemble: Well printed parts, the Assembly went without worries.

• A must-have spare parts Removable build surface: made of spring steel and smooth pei, coated pei, print bed surface, double printing side can meet your different filament need. The Smooth Side pre-applied a pei sheet leaves a glossy, reflective finish. The Textured-powder Side leaves a textured matte finish. Give you two different experience just by flipping it over.!!
• Easy to remove model: fit for most filament, like ABS TPU PLA PETG etc printing material. It is easy to move after bed cooling, no need adhesive or glue stick.
• Comes with magneticc sticker, Simply stick the soft sticker sheet onto your heated bed and place the flexible PEI build plate platform on it. The sticker bottom holds the flexible build plate very tightly. Once you have finished printing, remove the spring steel plate, flex the print off, and snap the pei plate back onto the sticker sheet. Prints are removed easily without any scratches or damage.
• The removable flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface with strength when heated, easy to releases them effortlessly when cooled. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, bends for easy removal of prints.
• Size: 244*264, please measure your hotbed before ordering,

• A upgrade Replacement printing platform-Round JanusBPS 270mm/10.6inch, compatible with Flsn Super Racer model. This steel plate is Double-Side Coated, one side with Gold Powder, another with a Smooth PEI pre sticked, comes with a magnetic base.!!!Please re-measure your build plate before ordering, not rely on its printing size area.
• Flexible, removable, can stick very well. The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! High strength and heat resistance. Both sides can be used to print, just flip it over, more convenient. The pei sheet is pre-sticked by machine, no worry about the bubbles, please peel off the profective film on the pei surface before using.
• Double sides can be used and easy to install: simply stick the bottom sheet onto your heated bed, then place the steel platform on the top. When you auto-level and mesh auto level with Kliper software on your PEI sheet, if it's done on the textured side, it will create fluctuations with the auto-level system since it is textured. ONLY using auto-leveling on smooth side PEI, everything will work perfect.
• Most filaments, such as pla, petg, can print directly on to the pei surface without the need for additional adhesives, tapes or slurry. Kindly note printing ABS needs a thermal insulation environment.
• Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it. Just wipe down with isopropyl alcohol between prints for best results.