Industrial & Scientific Store - Additive Manufacturing Products

• A lightweight locking shaft coupler Flexible design helps compensate for misaligned parallels and axial
• Zero rotation clearance Oil-resistant and anti-corrosive Often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc.
• Shaft : Approx. 6.35mm x 8mm (inner diameter for two ends)
• Length: Approx. 25mm
• Outer Diameter: Approx. 20mm Material: Aluminium

• Model : P000
• Shaft Diameter : 10mm (for which bearing is used)
• Size : 67x36x17mm
• Mounting Base Hole Diameter : 7mm
• Mounting Base Holes Centre Distance : 53mm

• Premium Quality--MK8 nozzles are made of high quality Hardened Steel and Brass.Heavy duty and provide a long service life.Easy to install and change.
• Package Include--Printer nozzles come with 30pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 12 x 0.4mm, 3 x 0.5mm, 3x 0.6mm, 3x 0.8mm, 3x 1.0mm,with 10PCS Cleaning Needlesand a plastic box for storage.
• Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
• Parameter--Input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; Screw thread: M6;Hexagon diameter: 6 mm
• Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.

• Principle: Turn The Screws To Make The Tops Of Both Ends Longer, So That The Prosthetics Can Be Firmly Held Against The Two Ends To Prevent Loosening And Falling Off.
• Material: Cassettes Repair Device Is Anti Conductive Material, Reusable.
• Advantages: High Mechanical Strength, Strong Impact Resistance, High Tensile Strength
• Easy To Install: Strong Support, Firm And Durable, Quick Installation In Few Seconds Without Power Off
• Repairer Support Rod: 10Pcs Set Wall Switch Cassettes Repairer Are Suitable For Most Wall Mount Junction Box Repairing.

• Model number: pc4-m6
• Thread size: m6
• Material: brass and plastic
• Quantity: 2 pcs

• strong compatibility: High thermal conductivity, with strong compatibility, rapid heat treatment, save time and effort.
• simple assembly: Simple assembly, easy to install and remove.
• energy saving: High pressure cord, energy saving and environmental protection.
• plug and play: Simple and convenient to use, plug and play.
• very stable: The heating tube has super strong stability, high temperature resistance and low noise.
• imported: It has the characteristics of resistance to high pressure and low temperature, and will not cause any form of heat dissipation. Made of highquality material, stable and durable, high temperature resistance.

• 1.Upgrading from the ordinary temperature probe directly expose temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.
• 2. The temperature measurement range is increased from -50 ~ +250 to -50 ~ +320 . It results in printing high-temperature filament so it can replace the original K-type thermocouple temperature.For high-temperature filament print, the HT-NTC100K thermistors are highly recommended.
• 3. The new version of HT-NTC100K temperature measuring thermistor adopting 304 stainless steel which resulted in internal temperature package to ensure the maximum service life with precision temperature measurement.
• 4. HT-NTC100K thermistor adopts white high-temperature cord which withstands higher temperature. And for customers convenience, the wires adopts line connection, so the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market because it is not easy to break off.
• 5. Supports the customization of different specifications by including the temperature head cylinder size, length of the wires. 6. Suitable using with the new version of the heater because the new heater can heat up to 350 degrees.

• Outside Diameter: 8mm; Length: 300 mm; Pitch: 2mm; Thread Type: Square Thread (ACME Trapezoidal);
• Nema 17 Stepper Motor - Torque: 4.2 Kg-cm; Shaft Diameter: 5mm; Step Angle: 1.8 deg / step
• P08 Bearing for 8mm rods
• 5 to 8mm Flexible Coupling - Fit for Nema 17 Motor
• Package Include:: 1pcs Nema 17 Stepper Motor + 1pcs 8x300mm TR8 Rod + 1pcs Brass Nut + 2pcs P08 Bearing + 1 x 5x8 Flexible Coupling

• PETG 3D filament
• Print temperature: 230~250 degreesC
• Base temperature: 80 degreeC

• Type: Cable for 42 stepper motor
• Terminal: Black 2.54 mm Dupont Connector of 4pin & White PH2.0 of 6pin (XH2.54 4P-PH2.0 6P.)
• Length:1 Meter
• 3D Printer Stepper Motor Parts to connect Ramp 1.4 or Other devices.
• Quantity: 2 pcs.

• 100% Brand New And High Quality
• Durable Product
• Electronics Accessories
• Imported From HongKong
• weight: 30 gms and material: plastic

• Printing Area 55x28mm Up to 4 Lines Print
• Permanente Ink which works in all surface, like metal, plastic, oily, anti freeze , anti heat , glass
• Works only for Flat Surface
• Extra Long life metal body and Rubber Letter
• Package Content :- Batch Coding Machine , Letter Kit 3mm, 100ml Black ink, 100 ml Ink Solvent And Extra 1 Ink Pad.

• ID : M5
• OD : 10mm
• Height : 6mm
• Step Height : 2.5mm
• Material : Stainless Steel

• Low rds (on) output
• Automatic current decay mode detection or selection
• Mix with slow current decay modes
• Synchronous rectification for low power dissipation
• Internal uvlo, crosscurrent protection; 3.3 and 5 v compatible logic supply; Thermal shutdown circuitry; Ground fault protection; Load short-circuit protection; Optional step five modes: full, 1 or 2, 1 or 4, 1 or 8 and 1 or 16

• [Usage]: Used to upgrade goods replacing two phase high speed stepper motor.
• [Low Noise]: Full step, below 45db when working at the frequency of 200~1500 pps.
• [High Detent Torque]: It is 38 mN.m at rated current of DC 1.5A /phase.
• [Package]: Includes 1x 42 stepper motor (Nema 17), 1x 1m/3.3ft cable.
• [Note]: Please confirm the dimensions before purchase, as picture show.