Industrial & Scientific Store - Additive Manufacturing Products

• 1 KG (approximately 2.20 lbs) Spool
• 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
• ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant
• ABS is a strong, surface-treatable thermoplastic
• Recommended Extrusion/Nozzle Temperature 210 degreeC - 240 degreeC (410 degreeF - 464 degreeF), Use With Heated Build Platform Is Recommended

• Resistant to high temperatures (204 degree C)
• Chemically resistant
• UV stable
• Our Sheet size A4 (297 X 210 MM)
• Standard thickness: 0.15mm/150micron

• metal shell, high precision, stable operation efficient heating and heat dissipation
• Integrated Design: Brass nozzle heating/cooling system leveling system V pully Fixed wiring port, supper simple installation.
• High Precision Intelligent Leveling: Brand new automatic leveling sensor, high precision andlow energy consumption automatic leveling, accurate data transmission, standard deviation is only 0.005mm.
• More efficient heating and heat dissipation: Advanced thermistor & heating tube assembly, rapid heating. The heatsink adopts a hollow structure, which makes heat dissipation more efficient. Nozzle equipped with a powerful silent cooling fan can increase heat dissipation by 30%. The data comes from simulaiton analysis of Creality Lab.
• Package: 1set Full Assembled Hotend kit with Heater, thermistor , PTFE tube and silicone cover, LED, Cooling Systems like our first photo shows

• Soft Filaments of High Elasticity - Our Overture TPU Flexible Filament is a thermoplastic polyurethane (TPU) based filament specifically engineered to work on most desktop 3D printers. It has a shore hardness of 95A and can stretch 3 times more than its original length. Excellent bed adhesion, low-warp and low-odor, make these flexible 3D filaments easy to print.
• Clog-Free, Bubble-Free & Easy-to-use - Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with Overture TPU Rolls. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in a transparent bag, no bubble and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking.
• Dimensional Accuracy & Consistency - Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these soft TPU filaments to be strict tolerances, diameter 1.75mm, dimensional Accuracy 99% Probability +/- 0.05 mm without any exaggeration; 1 kg spool (2.2lbs).
• Cost-effective and Wide Compatibility - With over 9 years 3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as Ultimaker, RepRap derivatives, MakerBot, Makergear, Prusa i3, Monoprice MakerSelect and more.
• LIFE-TIME GAURANTEE - No matter when or why you need to replace or refund we will help! No risk to give us a chance to prove us, overture, are your reliable 3d filaments /accessories/3d printer/3d pen supplier.

• This item is a 2020 aluminum profile flat seal manufactured with premium material for durable and long-lasting use. Its easy to use and install with long service life.
• The precise design will ensure its practicability in the work of highly performance
• 6mm M6 Aluminum Profile Slot Cover 2020 Aluminum Fittings Seal Accessories for 3D Printer
• 3D Printer DIY Parts 303 Aluminum Profile Slot Cover

• 265 Maximum Temperature
• PC/PETG/PLA/ABS, Available in Adventurer 3 series (AD3/ AD3C/AD3 Lite)

• High strength aluminium alloy material, efficient heat transfer, strong structure and long service life.
• Adopting new production technology and imported CNC lathe processing, quality assurance.

• his drive is an upgraded version of the TB6600, the breakdown of heightening to 32 segments, for high segmentation purposes. Applicable stepper motor: 42,57,86 type of 2-phase 4-phase (4-wire 6 wire line 8)
• Features: 1, 9V-42V DC power supply; 2, H-bridge bipolar constant-phase flow-driven; 3, the maximum output current of 4.0A eight optional; 4, up to 32 segments of six kinds of sub-modes available; 5, the input signal is high-speed optical isolation; 6, standard common anode single pulse interface
• 7, offline hold function; 8, semi-enclosed chassis can accommodate more demanding environment; 9, provide energy semiautomatic current lock function; 10, built-in thermal protection and overcurrent protection.
• Control signal 3.3V-24V universal, no series resistor required)
• Package Include: 1 x TB6600 Stepper Driver

• MEGA 2560 and RAMPS 1.4 set on a board, to solve complicated RAMPS 1.4 combination of interfaces, the problem of failure prone.
• Support up to 5 motor driver (A4988 or DRV8825)
• Can accept 24V input power under the same system can be hot-bed current is reduced to 1/4, an effective solution to the hot bed MOS pipe heat problems.
• The firmware can use open source firmware Marlin, ramps1.4 identical configuration and can directly replace Ramps1.4.
• The circuit board with high-quality 4-layer, heat and made a special optimization; ramps are 2 shelves.

• Model: SHF8 ;Bore:8mm
• Material: Aluminum; Surface Finish: Anodised; Color: Silver
• Shaft Support suitable for 8mm Diameter Shaft used in CNC, 3D Printing applications
• Product Size:42 x 24 x 10mm; Inside Diameter:8mm/0.31\"(Applicable to the optical axis diameter 8mm)
• Clamping bolt:M4; Recommended Mounting bolt:M5(not included here)

• High-quality Material: Made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance. The overall hardness of the nozzle is 50 HRC and the surface hardness is 55-60 HRC, long service life.
• High-temperature Resistance: The nozzle can withstand temp up to 450 degrees, suitable for 3D printing at high temperature, not only suitable for common 1.75 mm 3D printer filaments, but also can print filaments of PLA, ABS to carbon fiber, even PEEK.
• Wide Compatibility: Suit to almost all FDM printer, could install to MK8 heating block. These nozzles compatible with MK8 hot end for E3D V5/V6 and Ender 2 3s 3 Pro, also compatible with CR-10 all-metal hotend, Prusa i3, Anet A8, Reprap, etc.
• High Precision: The inner wall of the nozzle with a diameter of 0.4mm is smooth without burrs, and the viscosity coefficient is small. Maintain a stable temperature during printing to allow filament to be discharged evenly.
• What You Get: Package comes with 5 pieces of 0.4mm black hardened steel nozzles. If you have any questions about our nozzles, please feel free to contact or QA us, we will provide you satisfied solutions.

• Magigoo ensures a strong adhesion to the hot plate
• All you need for sure adhesion of 3D prints.Magigoo is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem'
• Get a single pen. We are sure you will be back for more it is that good

• Model Number : PC4-M6
• Thread Size : M6
• Material : brass & plastic
• Quantity: 2 pc
• Use: Bowden extruder in Creality and other 3D Printer Extruder

• Model : SK20
• Shaft OD : 20mm
• Size : 60x20x51mm
• Mounting Base Hole Diameter : 6.6mm
• Mounting Base Holes Centre Distance : 45mm

• Package Contents: Heavy duty printing press machine for flat items printings.
• This is heavy duty machine with bed size of 15*15.
• Time and temprature can be controlled using digital meter. Different time and temprature for different items.
• Suitable Uses: Used for DTF, screen printing , Mask Printing , Sublimation printing, Sarwoski Shoe Printing.
• For any queries regarding the product you can call on : 9717541444