Industrial & Scientific Store - Additive Manufacturing Products

• TRI COLOR FILAMENT

• Compatible with John D-eere 107S, D100, D105, D110, D120, D125, D130 Series Tractors

• Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ?0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
• The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
• - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
• - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
• 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk

• Fully assembled extruder for Neptune 3 Pro/3 Plus/3 Max ONLY
• All extruders are tested before shipping, so some test filament may remain inside
• ELEGOO Official 3D Printer Accessories
• If you encounter any quality issues, we're always here to help

• Materials: Good Quality Metal and Plastic, Stable,Sturdy, long service life,fine workmanship
• Install: Already pre-assembled,you don't need to assemble it by yourself
• Suitable for 0.5kg or 1kg and below ABS/PLA 1.75mm 3D printer filament,keeping filaments dry during the printing
• Application Scope: Suit for all type 3D printer, for Ender 3 series, for CR-10 series
• Package Content: 1Kit 3D Printer Filament Holder, 1PCS Dry Storage Box, 4 Packs of desiccant,1PCS thermohygrometer,1PCS Quick connector,1PCS Allen Key
• Reusable desiccant bags and upgraded packaging
• The Filament in the image are only used with the photo scene, the actual shipping products do not contain Filament, please note, thank you
• Note:If you have any questions, please contact us directly and we will help you until you are satisfied

• Main Control Chip Features: This SKR Mini E3 V2.0 motherboard uses the STM32F103RCT6 main control chip, and its flash memory size is 256K
• CNC Fan: Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0 version of the fan is not ready to use after power on)
• Hot-bed Mosfet: The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation
• Upgrade Features: Support BLtouch, filament detection, power-off resume, automatic shutdown, etc.; Increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink
• After-sales Support: If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems

• High Quality: Strict production standard to guarantee high accuracy. Eco-friendly with high performance, no bubble, no jamming, no drawing.
• High Compatibility: The sparkly black filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.03mm.
• Print Temperature (190-220 degree C) : Give you the smooth prints which require less calibration and give off fewer extruder issues.
• Special Color:Marble Color Sparkly Black
• Now enjoy the fun of 3D Printing with Zi-Rui 3D: Enabling you to see your thoughts and concepts engineered into a real and rewarding reality.

• Washable & Bright Colors DTF Powder: GO2CRAFT 17.6oz(500G) DTF transfer powder is widely used for most fabrics, including 100% cotton, silk, polyester, denim, nylon, leather, blend, etc. It is also suitable for all DTF and PET film sizes. With excellent adhesion, washable and scratch resistance, and flexibility. Its sealed pocket design makes it easier to store and carry. It is recommended to store unused DTF powder in a cool, dry place.
• Good Adhesion & Easy to Peel Transfer Film: After more than 10 times coating, the DTF transfer film has stronger ink absorption ability, brighter colors, and clearer patterns. The non-printed surface is specially treated and free of static electricity. After shaking, there is no powder residue. DTF transfer paper's high-quality matte surface is the printing surface. The printed pattern can withstand hundreds of washings and easy to peel. DTF films are compatible with Epson and DTF printers.
• Why Choose GO2CRAFT DTF Starter Kit: Our DTF transfer powder film kit contains everything you need which contains 500g?17.6oz) transfer powder, 20pcs DTF transfer films,tweezer,sticker,powder collection tools,gloves, tray, teflon sheet,and high-temperature tape.The powder can be poured into the dustpan to prevent excessive pouring and to recycle excess powder; the brush is suitable for a more uniform powder application.This DTF kit is the best choice for DTF beginners and enthusiast.
• Special Wonderful Gift: The protective gloves, tray for recycle excess powder,powder collection tools for apply powder and avoid excessive pouring ,and high-temperature tape are all special features. Stickers are also a feature to avoid some printers not recognizing DTF films. And this DTF powder starter kit can be applied to canvas, hoodies, sneakers, handbags, T-shirts, hats, pillowcases, gloves, phone cases, etc. With unique designs, it is a special gift for you and your family.
• Operation Tips: 1.Apply the powder several times can achieve better results. 2.The transfer powder can be reused. Please don't mix the different brands powder together. 3.When melting powder, you can put teflon paper underneath to avoid uneven melting caused by your instrument. (310 ?/155 C, 120S) 4.Reheat helps to maintain its durability and enhance its color. ?First heat :320 / 160 degree C, 15s; Reheat :320?/160 degree C,8s).5. It is recommended to wait for 48 hours before the first wash.
• Quality Service: GO2CRAFT is committed to providing craft enthusiasts with better materials and simpler and more efficient tools, helping you realize more possibilities. We attach great importance to the needs and experience of users. If you encounter any problems during use, please contact us and we will solve them for you immediately.

• Product Features : For the PEO+PEI build plate, the PEO side presents a diamond pattern, showcasing the intersection of gloss and matte surfaces to create a diamond texture, elevating the print surface with sophistication. Capable of supporting temperatures up to 150 degree C, it's ideal for users working with low-temp filaments like PLA and PETG. Our in-house developed PEI coating exhibits a delicate matte texture, exuding a calm and stable demeanor, with an impressive high-temp filaments.
• Premium Materials : In addition to sourcing thickened PEO film and our proprietary high-viscosity PEI formula, our choice of a 0.4mm thick stainless steel plate ensures resistance to deformation and rust, maintaining high flatness and ample resilience. With excellent adhesion, it's incredibly user-friendly for new users. We've repeatedly tested and validated the results.
• Usage Guidelines : Pay attention to the nozzle-to-surface distance to prevent scratches that could leave permanent marks. Regularly clean the surface with alcohol or a cleaning agent, as dirt and oil can reduce print adhesion and affect the clarity of the diamond pattern on the PEO surface. In extreme conditions, such as humid filaments, complex models, our practical experience suggests lowering print speed, increasing bed temperature, and optimizing filament and chamber temperature.
• Compatibility : Size?330x330mm, it fits perfectly with the Flsu Core-XY,Troxy X3S/ X5SA/X5SA Pro,Geetch A30,A30 Pro,Qid1 X-Max3, Neptune 3/4 Plus/Rais 3D Pro 2/Pro 2 Plus 3D Printer. If you're uncertain, feel free to contact us directly for assistance. As both manufacturers and printing enthusiasts, we use our own products for printing and creative work. We believe that a scientific approach enhances both print quality and the joy of the process; however, it's not magic or mythology.
• Our Promise : We guarantee the quality and performance of our double-sided textured PEO+PEI printing plate. Your queries and suggestions are our priority, and we promise a prompt response within 24 hours. Thank you for choosing our product. Our team is ready to assist you with personalized services tailored to your unique requirements through the platform's messaging system.

• Silk Dual Color PLA You can get a gorgeous 3D printing surface. Shiny Silk Blue Purple combination of magic 1.75mm PLA filament, make the two sides of your print appear in different colors. Every inch has has two colors. This gives your prints not only a smooth and shinny appearance, but also a unique color pattern and effect.
• Tangle-Free, Neatly Wound : more resilient than traditional PLA, not easy to damage. Strict manual inspection ensures the neatness and easy feed of PLA filament winding. Vacuum-sealing guarantees moisture-free printing, eliminating clogs and bubbles, which increase your printing success rate.
• Higher strength and better toughness Compare with PLA, it has higher strength and better toughness.High Purity & High Precision. Low Shrinkage & Strong Layer Adhesion.
• Exceptional fluidity, Rapid cooling : Compared to other PLA, our Rapid PLA has fast melting and fast cooling. Printed parts have excellent surface detail and quality.
• Fits for most 3D Printer : Works perfectly with most fast-printing FDM 3D printers on the market. Compatible with Bambu Lab A1 mini / X1C and P1P/ AnkerMake M5/ Voron 2.4 / Flsun V400/ Creality K1/ K1 Max and Ender 7/ Raise 3D Pro 3 and RMF500.

• PLA+ Filament Advantages --- PLA+ 3D Printer Filament is improved and upgraded based on PLA filament,good adhesion performance ,high strength and better toughness.Clog/Bubble/Tangle/Warping/Stringing free, high durability, better layer adhesion.iBOSS filaments are made with virgin materials, no pollution, non-toxic and no odor during the printing.

• Premium PETG Filament: Explore the world of 3D printing with our superior quality PETG filament 1.75mm combining the ease of printing of PLA with some of the durability of ABS - the ideal choice for precision and reliability.
• Exceptional Printability: TEQStone filament PETG ensures hassle-free 3D printing, boasting minimal warping and superb layer adhesion for consistent, professional results.
• Durable and Impact-Resistant: Create robust prototypes, mechanical parts or outdoor components with confidence using our PETG filament 1.75, known for its durability and impact resistance to moisture and UV exposure.
• Versatile Applications: Unleash your creativity with TEQStone PETG filament 1.75, suitable for a wide array of projects, from functional prototypes to artistic masterpieces.
• Quality Assurance: Our PETG undergoes rigorous quality control to guarantee ?0.02mm precision and highly-consistent colors, ensuring a smooth and reliable 3D printing experience every time.

• Premium PETG Filament: Explore the world of 3D printing with our superior quality PETG filament 1.75mm combining the ease of printing of PLA with some of the durability of ABS - the ideal choice for precision and reliability.
• Exceptional Printability: TEQStone filament PETG ensures hassle-free 3D printing, boasting minimal warping and superb layer adhesion for consistent, professional results.
• Durable and Impact-Resistant: Create robust prototypes, mechanical parts or outdoor components with confidence using our PETG filament 1.75, known for its durability and impact resistance to moisture and UV exposure.
• Versatile Applications: Unleash your creativity with TEQStone PETG filament 1.75, suitable for a wide array of projects, from functional prototypes to artistic masterpieces.
• Quality Assurance: Our PETG undergoes rigorous quality control to guarantee ?0.02mm precision and highly-consistent colors, ensuring a smooth and reliable 3D printing experience every time.

• Easy to Load and Use : Our PLA+ Plus filament features a self-developed winding device that makes it incredibly easy to load and use with your 3D printer. This feature has made it a popular choice among consumers who are seeking high-quality 3D printing filament.
• Wide Compatibility : With its high dimensional accuracy of +/-0.02mm, the Our 3D printing filament is compatible with almost all 1.75mm FDM 3D printers. This versatility makes it an excellent option for users with various 3D printing needs.
• Superior Performance : Made with advanced technology, Our PLA+ filament offers superior performance, including strong bonding and smooth flow. This results in high-quality 3D prints with precise details and smooth surfaces. Additionally, the filament is dried for 24 hours and vacuum-sealed with desiccant to prevent moisture, blockage, and bubbling, ensuring consistent, superior performance.
• Enhanced Toughness : Our PLA+ filament is several times stronger than traditional PLA, making it an excellent choice for functional prints and projects that require enhanced durability. The filament is optimized for nozzle temperatures between 210 ~ 235 degree C (410?F ~ 455?F), bed temperatures of 50 ~ 65 degree C (122?~ 149?) , and printing speeds of 50-100mm/s, allowing users to achieve high-quality 3D prints with precise details and smooth surfaces.
• Convenient Spool Design : Our PLA+ filament comes on spools with an 8.00\" diameter, 2.50\" spool width, and 2.20\" spool hub hole diameter, making it incredibly easy to replace and ensuring uninterrupted 3D printing projects. This convenient spool design has made Our PLA+ filament a popular choice among 3D printing enthusiasts.