Industrial & Scientific Store - Additive Manufacturing Products

• Genuine E3D Parts
• Modular Upgrade Upgrade your existing V6 for fast, powerful, plastic extrusion power.
• Custom Designed Heater Block Custom-machined aluminium block.
• Print Big Big fat layers for big, strong parts.
• Easy to Use Get started quickly and easily, and print faster than ever.

• T-type threaded rod diameter: 8mm(0.31\"). Length of the lead screw: 1000mm(39.37\"). Pitch: 2mm(0.08\"). Lead: 8mm(0.31\"). Nut material: brass
• Material of the lead screw: 304 stainless steel. Not easy to rust. Nut material: pure copper.Wear-resistant,high-temperature resistant,durable and has strong thermal conductivity
• Fine manufacturing. Clear screw thread. Nut fit tightly. Excellent static and dynamic stiffness. Accurate linear motion. Smooth and smooth sliding
• Freely customize DIY. You can freely customize the size of each component. Wide of of applications, can be used in 3D printers, stepper motors, CNC machine tools, engraving machines and other equipment.
• Package includes: 1x T8 1000mm lead screw, 1x nut

• Application This Ender 3 S1 Mainboard is 100% original from Creality. Just fits for Creality Ender 3 S1 3D Printer and Ender 3 S1 Pro.
• Super Quiet The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB).
• Driver With TMC2208 driver, the bootloader has been preinstalled. You only need to copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
• Optimized Circuit Ender 3 S1 adopt thermal runaway protection to effectively solve heating problems. Could be used in combination with the E/Z/Y/X drive axis. NOTICE: It only plug and play for Ender-3 S1. If you want to install it on Ender 3 S1 Pro, please flash the machine firmware. You can download firmware from official website.
• After Sales Service More than 10 engineers provide lifetime technical assistance. Please kindly contact us(seller) via "ask a question? find us directly, cause our customer service will respond to you within 24 hours.

• This is Micro Swiss All Metal Hotend Kit for Wanhao Duplicator 6 with the following improvements:
• Slot clamping system
• No screw to the thing and damage the thermal pipe
• Significantly better heat transfer (this is a big one!)
• Easier to disassemble and adjust. Precise control of the bore diameter

• SKR MINI V2.0 ?Update from SKR MINI E3 V1.2, It's perfect upgade of Ender 3 3D printer motherboard. And the main control chip is STM32F103RCT6 of SKR MINI E3 V2.0. support Marlin and Klipper. When running klipper, Must be used with Raspberry-Pi or BTT Pi V1.2 Control board.
• SKR MINI V2.0 Stepper Motor ?Integration of TMC2209 UART Mode (If you have any questions within using,pls contact us through Amazon, we will get back to you within 24 hours)
• TFT35 E3 V3.0 Main Chip ?ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; support touch screen and 12384 mode. Notes: when running Klipper. btt tft35 e3 v3.0.1 touch screen display only support 12864 mode, if want touch screen mode, you can choose BTT HDMI5 Klipper touch screen.
• TFT35 E3 V3.0 Wiring Method ?LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
• SKR MINI V2.0+TFT35 E3 V3.0 Firmware ?The manual and installation instructions have been uploaded to Github, If you have any problems during use, please tell us at the first time, we will give you a satisfactory solution.

• MAKE IT MATTE: Everything looks better with a matte texture. It helps to make details that are otherwise overlooked standout and hides away unrealistic layer lines
• RUBBER-LIKE FLEXIBILITY: Thanks to the flexible nature of TPE material and a shore hardness of 85A, you can expect your build to be impact resistant, shock absorbent, low temperature and abrasion resistant
• NOT SUITABLE FOR ALL-METAL HOTEND: All-metal hotends could result in clogging. Please avoid using all-metal hotends with SpiderFlex filament
• DIRECT DRIVE EXTRUDER RECOMMENDED: For the best results, we recommend using direct drive extruders. This is to allow the distance between the drive gear and melt zone to be as short as possible, ensuring the most efficient feed. (*Suggested print speed: 10-30mm/s)
• VERSATILE APPLICATION: SpiderFlex filament can be used for a broad range of 3D printing applications. (*Suggested Printing Temperature 210?C - 230?C) Including, but not limited to gaskets, phone sleeves, watch straps, flexible hinges, rubber tires, and so much more

• 2kg 3d printing Filament

• Q7 3D-C FIL PLA+ F D1.75 B/W 1KG 2P(AMZ)

• Premium PLA Filaments Clog-Free, Bubble-Free, Tangle-Free, Low warping, perfect 3D Printer PLA Filament 1.75mm for smooth and stable 3D printing experience, making printed parts an outstanding surface finish.
• 1KG (2.2LBS) SPOOL Spool size: ?200mm/7.87\" flange, ?53mm/2.09\" hub hole, 65mm/2.56\" width. Filament dimensional accuracy 1.75 +/- 0.02mm. PLA filament has minimal shrinkage and warping.
• Vacuum Packaging Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after opening the sealed package to prevent it becomes brittle or jams the nozzle.
• Technical Specifications Recommended Extrusion/ Nozzle Temperature 190?C - 220?C, net weight 1kg spool, hot bed 25?C - 60?C.
• Wide Compatibility Works and harmonizes perfectly with all common 1.75mm FDM 3D printers. Voxelab 3d filament 1.75mm is the most common and easiest to print with since it is cheap and does not have warping issues and has good adhesion to the bed.

• 3D Printer Filament, PLA Glow in The Dark Printing Filament 1.75mm,5 Colors 3D Printing Materials,250g x 5 Spools Set, 1.25kg/2.76lb
• How to glow correctly?During the day, it absorbs light energy to emit a gentle glow in the dark. To intensify the effect, 3d printer filament glow PLA glowing amazing effect is produced only after 20 minutes of exposure to strong sunlight, UV light or flashlight. Longer glow time with 30 minutes of exposure .
• All-in-One PLA Filament: This filament is more than just a glow effect?it's odorless, clog-free, bubble-free, and beginner-friendly. It combines the best of all worlds, delivering outstanding glow, ease of use
• Universal Compatibility: Worried about compatibility? Rest easy. Our filament boasts a 1.75mm diameter with a precision of +/- 0.03mm, ensuring seamless integration with most FDM 3D printers on the market, including models
• Professional Packaging: Each filament spool undergoes meticulous vacuum sealing to preserve its peak performance. Our packaging guarantees a dry and dust-free filament

• High elongation Elongation at Break: 255%. This can fully ensure that the prints are not easily broken during repeated bending and stretching.
• Tear resistance Tear Strength: 47.2KN/m. It has better tear strength than other flexible resins, which means that the prints will not be easily torn during use.
• Soft like rubber Shore Hardness:60~75A. The prints is very soft at a temperature above 20?C, but the lower the temperature, the harder it will become.It will become very hard and impact resistant at 5?C.
• Wide adaptability Designed for 385~405nm UV LED light source, it is suitable for mainstream LCD/MSLA/DLP resin 3D printers on the market.
• Professional after-sales service Our customer service team is composed of engineers who have years of experience in resin 3D printing to ensure that you can print the model smoothly.

• Material Plate is made of high quality cold rolled sheet material
• Advantage A direct drive extruder improves extrusion and retraction
• Widely Used Used for Ender 5 /Ender 5 Pro /Ender 5 Plus 3d printer upgrade direct dual gear extruder
• Filament More material options,easy to print TPU flexible filament
• Package Include 1kit direct extruder support plate with 4pcs pulleys, 1pcs length 60mm motor extension cable(one end is female and the other is male),1kit metal dual gear extruder structure,1pcs stepper motor

• 1. The special shine-free and frosted texture of the print surface
• 2. Good liquidity and it can decrease the possibility of the clog
• 3. Based on the PLA material means it is friendly with new comer, compatible with most of the fdm/fff 3d printer
• 4. Application in the field of artistic creation, the effect is very good
• 5. The toughness of this type of filament is better than the regular PLA.

• Premium Pla Filament Bundle Spool Diameter: 7.87\"-Spool Width: 2.56\"-Spool Hub Hole Diameter: 2.09\".Dimensional accuracy:1.75 +/- 0.02mm.
• Technical Specifications Recommended Extrusion/Nozzle Temperature:200?C-230?C. Platform Temperature:25?C-60?C.net?Hot Deformation Temperature?55?C, weight:1kg Spool (2.2lbs).
• Vacuum Packaging Vacuum packaging with desiccant to keep the 3d printer filament dry , keep out dust and effectively protect the filament from moisture.
• Wide Compatibility : Suitable for most of FDM 3D Printers, 1.75mm High Diameter Tolerance, No Edge Warping, Consistent Feeding, Stable Print, No clogging, Eco-friendly, Ideal for Indoor Printing.
• 100% Satisfy Warranty : Within 24 Hours Reply,100% Satisfaction Guarantee, If you have any question, please free contact us.