Industrial & Scientific Store - Cutting Tools

• 1/2 Inch Shank 120 degrees tongue and groove router bit set with up to 1\" Stock
• Solid hardened steel bodies with anti-kickback design, C3 micro-grain tungsten carbide cutters and build-up & heat resistant Teflon coating prevents build-up of sawdust, resin, and pitch
• Solid Hardened Steel Bodies with Anti-Kickback Design, High precision, special impact resistance, strong and durable
• Cut perfectly fitting (v-groove) tongue & groove joints, ideal for flooring and wainscot paneling
• Suitable for woods, MDF, particle board, plywood compact panel; Avoid cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc.

• 1) 3 standard SAE step drill bits can drill 28 different size of holes on different thickness of materials. One 3/16-inch to 1/2-inch six-step bit, 1/4-inch to 3/4-inch nine-step bit, and 1/8-inch to 1/2-inch 13-step bit(detailed hole size and drill depth of each drill bit please check in Product description below)
• 2) Made of high quality high speed steel that is hard and sharp enough to drill through wood, plastic, steel and sheet metal
• 3) Titanium coated surface can reduce friction and overheat when drilling through material for longer life time
• 4) Two-flute design provides faster, smoother and accurate cutting
• 5) 1/4\" hex shank (6.35mm)can be easily fit into power driver, drill and press drill

• Grommet Kit: Come with Grommet+ 1 fixing tools (Base, Punch, a install tool), grommets in Colors, Each color Metal Grommet Kit Size: As Choice internal hole diameter, Outside diameter, Barrel length Easy To Use Lenth with Anit Grip
• Easy to Use: Take the hole punch tool provided and punch the hole on leather crafts, leather straps, or clothing, then hammer it to push grommets together (Tip: it's better to put a soft cushion under the punch tool and leather / clothing, not do the punching job directly on the bare hard floor or other surfaces, otherwise, the punch tool's edge will be blunted)
• Multiple Application: Variety of uses, for canvas, shoes, leather strap, wristband, jeans, windbreakers, jackets and etc, good for adding ornaments to your crafts Easy Storage: The grommets and tools are stored in a clear case with removable baffle to separate these compartments, which is convenient to find the corresponding components
• Pls understand that this product contains the items as mentioned in the End Side TITLE Inside brackets.Only these items with mentioned quantity will be deliver
• Note:-The Total Quantity in the Item is Exactly the Same As Mentioned in the Title in Bracket The Content Displayed in the Photos Videos are Only Meant for the Display Usage Purpose

• Ideal for screwing,drilling

• For use with octagonal Onhu08 double side insert
• With 16 cutting edges is the most economical insert on the market for face machining application
• Negative radial rake angle and axial rake angle structure combined with thick ONHU insert body improves cutter overall resistance to impact and toughness
• Inserts are not included
• Overall height is 1-3/4 inch

• 10 pc indexable uncoated APKT1003 inserts
• Case with sliding across lid included
• Case dimension: 1-1/2''L x 3-3/4''W x 1/2''H

• 1/4\" Diameter Jobber Legnth
• Package of 12 Drills (One Dozen)
• Tri-Flat Shank Prevents \"Slipping\" in the Drill Chuck
• 135 Degree Split Point Prevents \"Walking\"
• Drill Hog USA Lifetime Warranty

• Brand New High Quality 4\" Tilting Regular Rotary Table with a ER20 Collet Adaptor for Instant Milling Solutions
• * Total Height of the assembly is approx 110 mm
• * The Nuts are Balanced & Concentric run out of the Adaptor (*when tested alone) is within 5 microns
• * The base plate of Adapter is M6 drilled in a manner that it can fit both 3 as well 4 slots table.
• Standard Shipping from Outside USA . Delivery Time is 7 -10 Days !!

• Brand new Material: steel+plastic Color: as picture shows Grinding head diameter: approx. 3.175 (mm) Locating cover size: approx. 60mm Quantity: 29pcs Position cover for fixing drill grinders, milling cutters, tools, grinders with tool with screw
• directly to the card holder in rotary grinders, and positioning. Bit usage: suitable for wood, plastics and other soft materials, carving, engraving, hollowing, chamfering, slotting, reaming
• Installation steps: Screw down nut, install the woodworking cutter Install the cutter locator Adjust the milling cutter to the same plane as the locator, and remember to adjust the scale. Adjust depth according to demand
• Package included: 6pcs x drill bits 1pc x drill dedicated locator 10pcs x 12mm sanding bands 10pcs x 6mm sanding bands 2pcs x mandrels\" -: Pls understand that this product contains the items as mentioned in the End Side TITLE Inside brackets.Only these items with mentioned quantity will be deliver Note:-The Total Quantity in the Item is Exactly the Same As Mentioned in the Title in Bracket The Content Displayed in the Photos Videos are Only Meant for the Display Usage Purpose.\"
• Package Contain :- Package Dimensions 17 x 11 x 3 cm, DIY Crafts 29 Pieces New Rotary Power Tools Accessory Wood Burr Grinding Sanding Kits

• Package contents: Hss cutt disc grinder cut-off circular saw rotary blade firm

• Confirming To IS 636
• W.P.: 13kg/cm2
• Size: 63mm ID
• Length 30 mtr

• Drill Hog USA 5 Left Handed Drill Bit Set
• Niobium Nb41 Steel
• Includes 1/8\", 3/16\", 1/4\", 5/16\", and 3/8\"
• Left Handed Threads (for removing broken bolts, screws, and studs)
• Lifetime Warranty

• Color: Black; Weight: 9g
• Package Content: 20Pcs x O-Ring
• Material: NBR
• Width: 2mm/0.08
• Inside Diameter: 30mm/1.18

• 1/8\" Cobalt M42 Jobber Legnth
• Package of 12 Drills (One Dozen)
• Tri-Flat Shank Prevents \"Slipping\" in the Drill Chuck
• 135 Degree Split Point Prevents \"Walking\"
• Drill Hog USA Lifetime Warranty

• Shear face grinding design delivers effortless cutting.
• Precision ground teeth for smooth accurate cut.
• Carbide tipped teeth and high speed steel body.
• Hundreds of meters straight cut on woods guaranteed
• Technical Specifications: Dia 5 ; Arbor Size:-16mm; Maximum RPM-12000; Number of teeth :40

• Shape Double Cut Cylinder Shape with Radius End SC-3, Size: 45mm Shank length, 1/4\" shank diameter, 3/8\" cutterdiameter, 3/4\" length of cut
• Durable Made of heat-treated tungsten carbide YG8 that lasts 10times working life than HSS , suitable for machining various kinds of metalmaterial including ?HRC65 hardened steel
• Versatile Widely used for metalwork, tool making, engineering,model engineering, wood carving, jewellery making, welding, chamferring,casting, deburring, grinding, cylinder head porting and sculpting
• Target Thisis an essential bit for metal worker& DIYcarving fans, easy to grasp and use, safe and reliable
• Packaging Packed with a transparent plastic tube for safety storageand protection