Industrial & Scientific Store - Cutting Tools

• Single point internal tool for cutting
• 60 degree Angle Included
• Left handed and metric sizes also available
• Made in the USA

• Designed for threading multiple thread pitches (ANSI, UN, and Metric 60 deg)
• Polished split face for improved edge retention and chip evacuation while reducing galling
• Split geometry makes the tool as rigid as possible
• Corner radius profile
• Lockdown flat automatically locates tool on center

• Designed for threading multiple thread pitches (ANSI, UN, and Metric 60 deg)
• Polished split face for improved edge retention and chip evacuation while reducing galling
• Split geometry makes the tool as rigid as possible
• Corner radius profile
• Lockdown flat automatically locates tool on center

• Designed to mill corner radii into a part
• 1 deg max flares tangent at pilot and shoulder to avoid steps and burrs
• Cuts on radius only
• Double-ended
• AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials

• Designed to mill corner radii into a part
• 1 deg max flares tangent at pilot and shoulder to avoid steps and burrs
• Cuts on radius only
• Double-ended
• AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials

• Long flutes for deep pocket milling and long length peripheral milling
• 30 deg helix
• Center cutting
• Square profile
• AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials

• Square Shank \"Style FRT\" Carbide-Tip Tool for Turning Full Radius
• Will Not Chip or Break under Normal Machining Conditions
• A Copper shim between two pieces of Silver solder material
• made in usa

• Designed for right hand turning and facing in lathe applications
• Ground with side rake to provide a positive cutting action and better chip evacuation
• Corner radius profile
• Solid carbide tipped with zinc coated steel shank for durability and corrosion resistance
• Available in industry standard fractional shank sizes

• High Speed Steel
• Carbon

• Perfect for filing, stone setting and other jewelry applications
• Made of Vanadium steel; comes in reusable plastic pouch
• Swiss made
• 44.5 millimeters long with 3/32 inch (2.35 millimeter) shank
• 12 cup burs in sizes 0.90, 1.00, 1.20, 1.40, 1.50, 1.60, 1.80, 2.00, 2.30, 2.50, 2.70, 3.00

• Suitable for engraving machine tool
• Total length: 24mm/0.94\"
• Diameter(Outer): 6.35mm/0.25\"
• Diameter(Inner): 3.175mm/0.125\"

• High Quality Carbide Tip: it is used with professional quality Carbide Tip , which will be used for drilling on brick, stone and concrete materials. The hardness of materials can be C45;
• Outstanding performance of drilling holes: Automatically welded Carbide Tip is much more than common ones;
• Auto welding Processing: the Automatically Welded carbide tip will not easy to go dropping. It can avoid loose welding or missed welding compared with labor welding and high frequency welding ways;
• Optimized brazing and hardening process for long life;
• carbide tip is tougher and more durable under heavy loads.

• CNC machined using high quality aerospace aluminum.
• Incredibly strong and very lightweight.
• Designed to move the wheel further out from the hub.
• Fixes clearance issues if your wheel is currently hitting your shocks or brake calipers.
• Measure to make sure your lug length is long enough for your application.Longer bolts/studs may be required depending on your vehicle and spacer thickness.Professional Installation Is Always Recommended.

• 1 set of HSS drill bit
• 13 pieces high-speed steel drill bit
• The drill bit controls the rate of chip removal

• These taps are made from high quality bearing steel for high hardness, durable and long service life
• There are total 7 pieces of taps in different sizes from M3 to M12 that you can use for tapping various threads
• They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them
• These taps are used with a tap wrench to do the tapping, wrench is not included
• Great tools used to create screw threads on wood, plastic, aluminum or many other soft materials

• Self-centering bits and sleeve
• Includes: 1 Brass Sleeve with a 4 equal side taper, 3/8\" Outside Diameter and 1.18 Inside Diameter, 1-1/8\" long 1 Brass Sleeve with a 4 equal side taper, 3/8\" Outside Diameter and 1.7 Inside Diameter, 1-1/8\" long 2 Quick Change Drill Bits #56 (1.18mm) 2 Quick Change Drill Bits 1.7mm