Industrial & Scientific Store - Cutting Tools

• Specific Size: Cutting Bit Diameter: 16mm(5/8 ); Shank: 10mm(0.39 ); Length: 157mm(6.18 ) length.
• High speed steel (type: 4341) is designed to ensure sharp and fast execution in metal material for clean results.
• Surface treatment of nitriding makes it durable, withstand heavy duty operation for long service life.
• Precision ground with geometry of 118 degree split point for quick penetration and accurate start-up.
• Suitable for drilling various materials such as die steel, l-beam, channel steel, ordinary steel, aluminum, copper, wood or 1-3mm stainless steel.

• Size: CCMT 21.51(CCMT060204), 3/32\" Thick,1/64\" Radius.
• Material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance
• Designed for Steel, cast iron and non-ferrous materials
• Used for turning and finishing on a wide range of materials
• 80 degrees diamond single sided insert with molded chipbreaker, 10pcs/pack

• Excel Impex brings you SDS Plus carbide tipped hammer drill bits for masonry and concrete drilling.
• Plus type tip provides more hammering action for ease of operation
• Unique flute design and optimized angle of flute enables faster debris cleaning and fast , efficient drilling.
• Higher carbide percentage enables longer service life
• Specifications: 12 mm thickness, 110 mm total length, 50 mm boring length.

• Round Die: Thread size: M10 X 1.25; outside diameter (OD): 30mm / 1.2\"; Thickness: 11mm / 0.43\"; accuracy class: 6g; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
• Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
• Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
• Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
• Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.

• Made from premium Alloy blade with high hardness, sharp and durable.
• Accurate positioning, smooth cutting, impact resistance.
• Easy chip removal and efficient perforation.
• Applicable to wood, plastic products, Acrylic, Resin and plywood etc.
• Size: Handle: 1/2 inch (12.7MM), Head diameter: 3/8inch (9.52MM)

• Diamond Grinding Head are used for shaping all types of glass with consistent and accurate tolerances
• Developed exclusively for stained glass grinding machines.
• Fits on all table top machines.
• Size 26 mm. A product manufactured by Excel Impex. Made in India.

• Specifications: Shank diameter: 3mm(1/8\"), cutting edge diameter: 2mm. Fits most rotary die grinders
• Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life
• Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel
• Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting
• Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly

• 1.Shoulder and Face Milling Cutters for milling machine
• 2.Hardened with 45-50 HRC for wear resistance
• 3.Comes with Hardened Torx Screw and Torx key in a plastic box
• 4.Run out is below 0.010 Micron for better machining
• 5.You can put any brand's insert of APMT1604 as its an ISO insert ,

• Metal saw frame l 300 mm, made of die-cast aluminum.
• Thanks to the special profile and ribs, extremely light and stiff.
• The closed handle with polypropylene handle protects the operator's hand against accidental injury.
• Effective blade tension using the knob on the bottom of the handle. For cutting rods, tubes, angles and other elements made of steel and non-ferrous metals
• Plastic coated surface. Includes a 300 x 12 mm bimetal saw blade, 24 tpi.

• Threaded Boring Head Shank Type R8 7/8 Inch - 20 Thread
• Dimension: 2 in L x 2 in W x 5-1/4 in H *Rough Estimation*; Weight: 1.50 Pound *Rough Estimation*
• Shank Type: R8
• Thread Size For Boring Head: 7/8 Inch -20
• Qty: 1

• 50mm Length Annular cutter for use in magnetic Drill
• Made of High speed steel for increased durability and accuracy
• Press with Weldon shank connection
• Performance machined with CNC for exceptional accuracy

• Blu-Mol Xtreme Threaded Spade Bits 10X Faster than the standard spade bit
• Threaded Tip for fast effortless drilling and twin spurs for cleaner holes
• Coating that prevents rust and extends the life
• Hex shank for Quick Change and no slipping
• Available in all sizes and lenghts.

• KOWOOD 6 teeth wood turbo curve carving disc provide a fast, smooth and controllable milling cut for wood
• Wide application to any wood material such as sculping, art craft, or any woodwork.
• KOWOOD Tech minimizes the vibration provides a precision curve cut to skipping the sanding process.
• Heavy-duty Carbide for longer working life and durable.
• Easy to operate and compatible with all major angle grinders, such as KOWOOD, Bosch, DeWalt, Makita, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker.

• Package Included: 1pc 1/2 \" carbide square end Mill.
• Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel.
• Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance.
• HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron.
• Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining.

• SKU# 404-2720
• Shank Diameter: 3/4\"; Overall Length: 7\"; Min Bore Diameter: 0.75\"; F: 0.45\"
• Insert Inscribed Circle: 3/8\"; Insert Style: 16ER; Insert Size: A60, AG60, G60
• Model Style - Threading Holder: SIL-0625-P16
• Product Included: One Insert, Screw and Key T15