Industrial & Scientific Store - Cutting Tools

• Re-sharpening the blunt blades of conventional bits not only costs time and money but also reduces the diameter of the bit. This is not a problem with carbide-tipped Duro-Form bits.
• Fast replacement of bits means sharp tools are readily available at all times.
• Guaranteed constant bit diameter, thanks to replaceable bits.
• Lower costs after purchase. One reversible bit lasts as long as two to four conventional bits and is thus extremely economical.
• The very hard-wearing reversible bits are exceptionally efficient, which means less cutting pressure is required and work is easier.

• High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
• Round shanks allow use with a wide variety of toolholding systems
• When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
• 29 piece drill blank set comes in a metal case

• High speed steel
• Black and gold drill bits, heavy duty
• Comes in plastic case

• Set of 21 jobber length drill bits includes inch sizes 1/16\" through 3/8\" in 1/64\" increments
• Left-hand helix for counterclockwise drilling and broken screw removal
• High-speed steel (HSS) provides hardness for wear resistance
• Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals
• 118-degree conventional point for a range of drilling applications
• Made in the USA

• Designed for generating retaning ring grooves in bores .134\" and larger
• Polished split face for improved edge retention and chip evacuation while reducing galling
• Coolant fed enabled shank design
• Sharp corner profile
• Proprietary Micro-Quik quick change system maximizes productivity through reliable accuracy and locational repeatability

• Designed for generating retaning ring grooves in bores .180\" and larger
• Polished split face for improved edge retention and chip evacuation while reducing galling
• Coolant fed enabled shank design
• Sharp corner profile
• Proprietary Micro-Quik quick change system maximizes productivity through reliable accuracy and locational repeatability

• Diameter (D): 1-1/4
• Angle (a): 45?
• Cutting height (B): 3/4
• Shank (D): 1/2
• Overall length (L): 2-3/4

• Threading Dies and Tap Size: Metric Size M3?0.5, M4?0.7, M5?0.8, M6?1.0, M7?1.0, M8?1.0, M8?1.25, M9?1.25, M10?1.25, M10?1.5, M11?1.25, M11?1.5, M12?1.5, M12?1.75, M14?1.5, M14?2.0, M16?1.5, M16?2.0; SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF.

• Unique Design: The pattern flush trim router bits is specifically designed with bottom double bearing and 10pcs carbide replaceable blades (12mmx12mmx2.2mm) fixed by Screw , The blade can be disassembled and replaced, which save costs
• Industrial Quality: The flush cut router bit is made of Industrial super-strength steel body and solid tungsten carbide Blade with high hardness and durable
• Sharp Efficient: The template bit features 10pcs individually carbide inserts to eliminate chipping ,Multi-blade design greatly improves work efficiency,tungsten carbide blade provide a clean and accurated cut, large chip space, good chip removal
• Wide Application: This flush trim bit can be used for any flush trim situation and is an excellent choice for pattern or template work
• Applicable Equipment and Materials: Perfect for trimming Particle board, Chipboard, MDF, Density board, Melamine board, Veneer plywood (Laminate) and Solid wood. It can be used with table mount and handheld router with 1/2\" collet.

• (D) diameter 1/4
• (R) radius 1/8
• (A) angle 7?
• (B) Cutting height 1
• (D) shank 1/2

• Nuts fit 3/8\" T-Slots
• Stud thread: 5/16\"-18
• 58 Pieces
• All parts are heat treated
• Storage rack included

• Set of 29 heavy duty screw machine length drill bits includes inch sizes 1/16\" to 1/2\" in 1/64\" increments
• High-speed steel (HSS) provides hardness for wear resistance
• Uncoated (bright) finish has no additional surface treatment or coating
• Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
• Meets ANSI specifications
• Made in the USA

• Package Content - Carbide Square End Mills, with a blade diameter of 1/8\", 3/16\",1/4\",5/16\",3/8\",1/2\",and a four-blade design. The shank is round and made of tungsten steel hard alloy material. This set is sold as a pack of 6 units.
• AlTiN Coating - Titanium aluminum boron nitride (AlTiBN) coating that provides excellent heat resistance and wear resistance, making the end mills stable even when processing materials at high temperatures. This coating ensures longer tool life, improving efficiency and cost-effectiveness.
• HRC 60 High Hardness - The whole body of the end mill is made of tungsten carbide material, which has a high hardness and wear resistance, making it great for processing high hardness materials such as stainless steel, mold steel, hardened steels, or other materials lower than HRC 60 hardness.
• Quick and Clean Milling - 4 spiral flutes that provide efficient chip removal and prevent clogging, resulting in faster and cleaner milling, can produce a smooth finish on the workpiece. Suitable for side milling, end milling, slotting, step milling, CNC machining center, engraving machine and other high-speed machine tools.
• Note - Please ensure that the end mill is firmly clamped to the machine table before starting any machining operations.

• Coolant through boring bar for left hand boring & facing with 5? approach (lead) angle
• Made from precision ground heat treated steel
• Coolant through design for improved chip removal
• Insert not included

• For 20mm(3/4\") thick ogee edge
• Fits on polishers/ grinders with 5/8\"-11 thread spindle
• The nylon guide assure the profiled edge remains straight
• Utilizing vacuum brazed diamond technology
• Wet or dry application optimal speed 3 500- 4 000 RPM.