Industrial & Scientific Store - Cutting Tools

• Face Groove Tool
• Lockdown Flat automatically locates tool on center
• Made in USA

• Table Slot: 7/16\"
• Stud Size : 3/8\"-16
• Made of high quality casting steel for long life and increased durability.
• All parts heat treated.
• Includes 4 each of 3\", 4\". 5\" and 6\" studs, 4 coupling nuts, 6 flanged nuts, 6 forged steel step clamps, 6 t-nuts, 12 steel step blocks and 1 wall rack.

• Diameter (D) 1-3/4
• Radius (R) 3/8
• Cutting height (B) 11/16
• Shank (D) 1/2
• Overall length (L) 2-5/8

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders.
• Cuts up to .172\" deep. Can be used for parting stock up to .344\". Cuts flush to collet face or shoulder of larger diameter.
• Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles.
• Uncoated high speed steel grooving insert for plastics, composites, abusive cutting conditions and low RPM cutting.
• Use with Large series toolholders. Use RH straight or LH 90 degree.

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders.
• Cuts up to .152\" deep. Can be used for parting stock up to .304\". Cuts flush to collet face or shoulder of larger diameter.
• Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles.
• Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts.
• Use with Large series toolholders. Use RH straight or LH 90 degree.

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders.
• Cuts up to .100\" deep. Can be used for parting stock up to .200\". Cuts flush to collet face or shoulder of larger diameter.
• Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles.
• Uncoated DURA-MAX 5000 carbide grooving insert for non-ferrous alloys, aluminium and plastic without interrupted cuts.
• Use with Large series toolholders. Use RH straight or LH 90 degree.

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders.
• Perfect for o-rings, snap rings and piston rings. Cuts within 1/16\" of collet face or shoulder of larger diameter.
• Designed for plunge grooving up to .100\" deep. Can also be used for parting stock up to .200\".
• Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts.
• Use with Small series toolholders.

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders.
• Perfect for o-rings, snap rings and piston rings. Cuts within 1/16\" of collet face or shoulder of larger diameter.
• Designed for plunge grooving up to .100\" deep. Can also be used for parting stock up to .200\".
• Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts.
• Use with Small series toolholders.

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders.
• Perfect for o-rings, snap rings and piston rings. Cuts within 1/16\" of collet face or shoulder of larger diameter.
• Designed for plunge grooving up to .090\" deep. Can also be used for parting stock up to .180\".
• Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts.
• Use with Small series toolholders.

• 1/4-inch Shank
• 2 sinter hip hi-density industrial chrome carbide for long-lasting performance
• 3-piece cove bit set; 1/4-inch 3/8-inch 1/2-inch radii, 1/4-inch shank

• Diameter (D) 1-49/64
• Radius (R) 5/64
• Cutting height (B) 53/64
• Shank (D) 1/2
• Overall length (L) 2-21/64

• Insert carbide rabbeting bit with 3/8-inch cutting depth
• 1-3/8-inch diameter with 1/2-inch shank
• Simply change bearing to produce different rabbets on wood and wood composites
• 3/8-inch depth rabbeting bit indexable knife

• SDS DRILL BIT DIMENSION : 3/16\" (Diameter) x 6\" ( Overall Length)
• APPLICATION : SDS Plus Drill Bit Is Ideal for Drilling In Concrete, Masonry, Stone, Bricks and Other Construction Projects
• SDS DRILL CARBIDE TIP : YG8C Tungsten Carbide Tip Ensure Quick Easy Drilling with Long Cutting Life
• SDS PLUS HAMMER DRILL DOUBLE FLUTE :S4 SDS Double Spiral Flutes Keeps Fast Easy Chips Removal with Fast Cut Speeds
• SDS PLUS SHANK : Made of Premium Quality of Crv Steel to Ensure the Long Cutting Life.