Cutting Tools By Bosch

• The HSS Twist Drill Bit Ground is for drilling through metal with maximum precisionThe bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precisionThe split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mmThe HSS Twist Drill Bit Ground is manufactured to DIN 338
• vThis precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edgesThis bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers
• Diameter (D) mm: 10,50

• Twist drill bit made of high speed steel manufactured to DIN 432
• Right-hand cutting twist drill bit, Type N, 135 degree drill bit tip, split, point manufactured to DIN 1412 C, diameter tolerance h 102
• Shank equal to drill bit diameter, drill bit colour: polished
• Two-cutter, cylindrical, two flutes
• Size mentioned = Diameter*working length*Total Length

• The Router Bit Set offers fine cuts for a variety of applications, making it the perfect choice for woodworkers such as joiners, carpenters, interior installers and construction workers.
• The carbide cutting edges of the bits ensure a long lifetime, while routing a variety of profiles in many different materials is possible thanks to the various cutting geometries. Furthermore, they are manufactured according to the safety standards of DIN EN-847. The router bits are intended for use in soft wood, hard wood and wood composites.
• The Mixed Router Bit Set, 30-Pieces is a complete collection of router bits for most common routing applications and also comes with additional spare parts such as a hex key and three ball bearings. The Router Bit Set features a special Easy-Pick design of the inlay, allowing the bits to be taken out quickly and safely by the shank.
• It comes in an exclusive and highly robust case that firmly and securely holds bits, offering perfect protection for its contents for safe storage and transport. It features a transparent cover for visibility of the content.
• The set is available in three versions, either in 6 mm, 8 mm, or 1/4-inch shank diameter, to cover compatibility with all common handheld routers.

• Product 1: Drilling diameter: in wood - 35 mm; in steel - 10 mm; in masonry / brick - 10 mm; screw diameter - 10 mm
• Product 1: Battery voltage - 18V, Battery type - Lithium-ion; Max. impact rate - 27,000 bpm; Chuck capacity, min./max.-1.5 / 13 mm; Torque settings - 20+2
• Product 1: Highly Serviceable: Motor has changeable carbon brushes for easy maintenance and serviceability; Durable: Designed with Robust Housing and Battery Cell Protection
• Product 2: Material: Plastic, Color: Blue, This measuring tape with three lock/stop modes provides easy usage
• Product 2: Item Dimension: 253mm x 280mm x 45mm
• Product 2: Package Contents: 1-Piece Screwdriver, 1-Piece Hammer, 7-Pieces Screwdriver Bits, 1-Piece Plier, 1-Piece Wrench and 1-Piece Measuring Tape
• Product 3: Material: 18/10 Steel
• Product 3: Item Dimension: 160.02mm x 55.12mm x 18.03mm
• Product 3: Package Contents: 1-Piece 4mm Drill Bit, 1-Piece 5mm Drill Bit, 1-Piece 6mm Drill Bit, 1-Piece 8mm Drill Bit and 1-Piece 10mm Drill Bit

• Rotary Hammer
• Drill Bit Set
• Bosch HCK001 7-Piece

• The HSS Twist Drill Bit Ground is for drilling through metal with maximum precisionThe bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precisionThe split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mmThe HSS Twist Drill Bit Ground is manufactured to DIN 338
• vThis precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edgesThis bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers
• Diameter (D) mm: 4,80

• Twist drill bit made of high speed steel manufactured to DIN 355
• Right-hand cutting twist drill bit, Type N, 135 degree drill bit tip, split, point manufactured to DIN 1412 C, diameter tolerance h 25
• Shank equal to drill bit diameter, drill bit colour: polished
• Two-cutter, cylindrical, two flutes
• Size mentioned = Diameter*working length*Total Length

• The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability.
• This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. There is a low risk of breakage, especially for drill bits below 6 mm in diameter as the bit is manufactured to have a highly elastic body. Its black-oxide coated flute provides fast chip removal. The HSS Twist Drill Bit PointTeQ is manufactured to DIN 338.
• The drill bit is Type N (flute angle) with a tip of 135 degrees. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers.
• Diameter (D) Inch: 3/8 Working length (L1) mm: 95 Packaging Content-10

• The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results
• The turn-angle head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete
• As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. It is compatible with rotary hammers with SDS plus holders
• Diameter (D) mm: 6,00

• 30 piece cutter set for fine work in soft and hard wood and wood composites.
• Perfect choice for all carpenters, carpenters, interior decorators and other builders
• Long service life due to carbide cutting edges and manufactured according to safety standards DIN EN-847
• For routers with 1/4 inch tool holder of all power tool brands
• 15 accessories including flush cutter, chamfer cutter, round cutter, profile cutter, and much more - see product description

• Secure Drill Bit Clamping for Any Job
• Keyed Drill Chuck is a simple and reliable solution for fixing drill bits for any type of job
• Consistently strong clamping force that securely fastens cylindrical or hex shank drill bits
• Easy handling: jaws are conveniently tightened and loosened with a key
• Different mounts: 1/2\" - 20, 3/8\"- 24, 5/8\" - 16, B16, and SDS plus; compatible with most common drills

• The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. The HSS Twist Drill Bit Ground is manufactured to DIN 338
• vThis precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers
• Diameter (D) mm: 9,50