Cutting Tools By Bosch

• Twist drill bit made of high speed steel manufactured to DIN 338
• Right-hand cutting twist drill bit, Type N, 135 degree drill bit tip, split, point manufactured to DIN 1412 C, diameter tolerance h 8
• Shank equal to drill bit diameter, drill bit colour is polished
• Two-cutter, cylindrical, two flutes

• The HSS Twist Drill Bit Ground is for drilling through metal with maximum precisionThe bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precisionThe split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm
• This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edgesThis bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plasticsThe HSS Twist Drill Bit Ground is manufactured to DIN 338
• The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers
• Diameter (D) mm: 14,00

• The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results.
• The turn-angle head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete.
• As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. It is compatible with rotary hammers with SDS plus holders.
• Diameter (D) mm: 12,00 Working length (L1) mm: 200 Total length (L2) mm: 260 Packaging Content-1

• Standard for universal screwdriver bits
• Size 45 mm
• PH2/PH2

• It has a 1/4-inch hex shank, and is intended for use with drill driversThe 1/4-inch Hex-Shank Extension for Self-Cut Speed spade bits delivers extended reach when drilling
• It offers two different extension lengths at 152 mm and 305 mm
• This extension is ideal for all applications with spade bits where extra length is needed
• Length mm: 305 Packaging Content-1

• Rotary multi-tool, 12V, 5,000-35,000rpm, 0.44kg
• Fastening clamp diameter: 3.2mm
• Speed regulator
• Professional 12 V system; compact performance; maximum freedom; all of our batteries are compatible with new and existing Bosch Professional tools in the same voltage class

• The SDS plus-1 Drill Bit is optimised for drilling concreteIt is compatible with all rotary hammers with SDS plus holder
• Its 2-cutter Tungsten Carbide plate makes the bit extra tough while its 2-flute U-shape flute design provides effective dust removal and standard lifetime
• The bit is intended for use on masonry and concrete
• Diameter (D) mm: 25,00

• The Router Bit Set offers fine cuts for a variety of applications, making it the perfect choice for woodworkers such as joiners, carpenters, interior installers and construction workers.
• The carbide cutting edges of the bits ensure a long lifetime, while routing a variety of profiles in many different materials is possible thanks to the various cutting geometries. Furthermore, they are manufactured according to the safety standards of DIN EN-847.
• The router bits are intended for use in soft wood, hard wood and wood composites. The Trim and Edging Router Bit Set, 6-Pieces contains edge-working router bits for flush trimming, chamfering, and rounding, and also comes with additional spare parts such as a hex key and two ball bearings.
• The Router Bit Set features a special Easy-Pick design of the inlay, allowing the bits to be taken out quickly and safely by the shank. It comes in an exclusive and highly robust case that firmly and securely holds bits, offering perfect protection for its contents for safe storage and transport.
• It features a transparent cover for visibility of the content. The set is available in three versions, either in 6 mm, 8 mm, or 1/4-inch shank diameter, to cover compatibility with all common handheld routers.

• The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concreteThe geometrical form of the 4-cutter head prevents jamming and breakage for optimal results
• The turn-angle head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wearFor efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameterThe bit is intended for use on masonry, concrete and reinforced concrete
• As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixingsIt is compatible with rotary hammers with SDS plus holders
• Diameter (D) mm: 16,00

• The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results
• The turn-angle head and the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete
• As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. It is compatible with rotary hammers with SDS plus holders
• Diameter (D) mm: 16,00

• Designed for drilling in concrete
• The tungsten carbide tip with two cutting edges makes the drill bit particularly strong
• Large U-shaped spiral for effective dust removal and standard service life
• To be used along with 2kg Hammer tool

• Suitable for concrete brick wall
• Diameter x Working Length x Total Length: 4 x 50 x 110 mm
• Suitable for concrete, brick wall

• The SDS plus-1 Drill Bit is optimised for drilling concrete. It is compatible with all rotary hammers with SDS plus holder.
• Its 2-cutter Tungsten Carbide plate makes the bit extra tough while its 2-flute U-shape flute design provides effective dust removal and standard lifetime.
• The bit is intended for use on masonry and concrete.
• Diameter (D) mm: 10,00 Working length (L1) mm: 400 Total length (L2) mm: 460 Packaging Content-1

• Designed for drilling in concrete
• The tungsten carbide tip with two cutting edges makes the drill bit particularly strong
• Large U-shaped spiral for effective dust removal and standard service life
• To be used along with 2kg Hammer tool