Water Treatments - Water Level Controller

• Floaty Water Level Controller WLC Square Head Float Switch Wired Sensor Security System Wired Sensor Security System
• Rated voltage: 250V & Rated current: 8A/Contacts: NO+NC & Weight
• Cable: 2 Meter (i.e. customize wire lenght is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices & Use: Water Level, liquid level Controller etc,
• INSTRUCTIONS, for INSTALLATION Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure
• MADE IN INDIA PRODUCT

• 3 Phase Digital Ampere Sensing Dol Starter With Water level Controller, And 3 Digit Seven Segment Display For Showing Voltage And Ampere Taken By Motor, And To Display Fault,
• It Has High Voltage Protection, Low Voltage Protection, Over Load Protection (settable from 2 to 20 ampere), Dry Run Protection(settable from 0 to19 ampere), Current Unbalance Protection,
• This Device Has Current Sensing Protection, So It Protect Motor From Burnout, While In Situation Of Unbalanced Current Taken By Motor In 3 Different Phase(R,Y and B) Due to Unbalanced Voltage Or Due To Phase Failure Or Due To Motor Problem
• Input Volt-415 Volt A.c.
• It Comes With Auto Manual Facility, In Auto Mode, It On And Off The Motor In According To Level Of Water In Upper Tank And Under Ground Tank, Even It Has 4 L.E.D. Indication To Indicate Level Of Water In Upper Tank And In Underground Tank, And In Manual Mode- User Can On And Off The Motor Manually Whenever They Required.

• Cable Length : 2 Meter Corrosion Free Material
• Can be Used With Tank Pools , Hydroponics, Salt water Tank, Fresh water tank, Gardening, aquariums for power head control, Pet bowls, fish tanks, filtration, RO , Water Coolers, Water Filters ,Dosing pumps Water Level Controllers etc.
• Caution : Your Project Should Not Have Mercury in It
• Ideal Operating Ratings : Voltage: 2 to 12V DC Current: 5 to 50mA DC, Max Switch Current : 500 mA (DC), Max Switch Watt : 10W
• Advance Magnetic Technology

• NOT SUPPORETD TO SUBMERSIBLE MOTOR
• Anti Corrosion Stainless Steel Sensor
• Contact capacity : 15 A
• Up to 2 H.P. Supported
• Water Level Controller For Mono Block Motor

• This Device will start motor by pressing start button of the controller and it will automatically switch OFF Motor, when the tank is full. User can press start button at any time they want. Automatic Controller ,Micro Controller Based Design ,Power Failure protection.(Not Start Motor Every Time on Power Failure.) No Man Power Required To Operate As Fully Automatic with 2HP capacity Longer Life No Mechanical System /.Avoid Overflow

• Working : This Controller will start motor by pressing start button of the controller and it will automatically switch OFF Motor, when the tank is full. User can press start button at any time they want.
• No man power required to operate as fully automatic with 2HP capacity.
• Work with any single phase or submersible motor for home, hospital, restaurant.
• Customer support Number for installation process: 1800123115599

• Warranty : 18 month Manufacturer. Warranty Service : Repair or Replacement. Package Contain : 1 Digital Starter with water level controller 6 S.S sensors 1 user manual
• This model is the combination of a digital water level controller and motor control panel (motor starter).
• Overload Protection, High & Low Voltage protection, Current based dry run protection Digital Volt and ampere meter are provided to see system voltage and load current accordingly
• Cyclic timer Delay timer provided with bypass facility Dry run Auto Reset timer provided with with bypass facility
• Auto swtich (when power goes and comes it start automatically) provided with bypass facility SPP ProvidedAUTO OFF WHEN TANK IS FULL OR SUMP IS EMPTY.

• THREE INDENPENDENT IRRIGATION TIME: The watering program allow you can set three different watering time. You can set P1 / P2 / P3 sets of timing programs according to your needs, Having 3 separate watering programs means having 3 different start times per day with customized irrigation frequency and duration, which can make totally free from manual watering and let the watering timer takes care of your lawn.
• SMART RAIN SENSOR CHIP: More water saving solution, thanks to the external rain sensor can stop the system automatically once there is a natural rainy days, prevent extra watering causing over irrigation and water waste. Once the rain on the sensor is naturally evaporated or wiped clean, the system will back to routine.
• EASY TO USE &LARGE LCD SCREEN: Large LCD screen design, more convenient to use. Button control, easy to set up.2 AA battery powered (not included).
• SPECIFICATIONS: Size: 16*9*6cm; recommend water pressure: 0.05-0.8Mpa, waterproof water timer. Universal installation.
• WORRY-FREE WATER TIMER: The water timer can be used for many scenes, can be used in the garden, lawn, yard and other places, it can meet your daily life needs of the sprinkler timer.

• Fully automatic water level controller for single phase
• Anti corrosion Carbon sensor
• Contact capacity : 2 HP
• Start, stop, auto, manual switch
• Compatible With All Water Level Controllers Models
• Shock Proof
• No Contamination
• Long Life

• Thread of 1/2 inch for easy installation insie the Tee points
• Corrosion Free Material
• SS-316 Stainless Steel
• Cable Lenght : 1 meter
• Useful for Water level controllers, water level detectors

• Magnetic float type sensors are maintenance free.
• Long Length of wire of 2.5 meter is suitable for tanks with height upto 2.5 meters
• Different color sensor wires for different levels to avoid any kind of confusion
• These magnetic float sensors are made using high grade stainless steel pipe and Abs float for maintenance free operation
• Two magnetic sensors are required in case three conduction sensors are used.

• Three Nos. Of Sensors
• No Corrosion Sensor
• Compatible With All Water Level Controllers Models
• 1.5 Meter Wire Attached
• Easy To Fit And Use
• Long Length Of Wire Of 1.5meter Is Suitable For Tanks Upto 2000 Litres

• Suitable for any AC motor that are operated by simple switch/MCB (Single phase motor - Monoblock, Jet Pump, Submersible, etc.)
• Seven Segment Display: Attractive display. for voltage, current, cyclic timer, power on delay, dry run time, password settings and live data. Over Head Tank Level Indication: 25%, 50%, 75% and 100%. Under Ground Tank Level Indication: 25%, 50%, 75% and 100%.
• Cyclic Timer: It has ON Time & OFF Time options. Duration: Maximum 99 Hrs and 59 Minutes.
• Protective features such as Dry Run and L/H voltage, O/U Load, Trip time.
• Password protected and helps for Authorized usage

• Smart gadget for water management

• water level controller for submersible control panel (runing and startring capacitor types)
• support up to 5 hp single phase submesrible panel
• having 2 power relay (40 amp)
• dual tank oparating with 6 ss sansor and auto manual function
• manufacturer number 9898111264

• Voltage: 250Vac Current: 15A Shape: Squarez
• Design Temperature: 80?C
• Contacts: No+Nc
• With 3 Meter Cable Length
• Product Colour May Slightly Vary Due To Photographic Lighting Sources Or Your Monitor Settings