Water Treatments - Water Level Controller

• Water level sensor controller, supports automatic water pumping, filling and draining.
• According to water level of the detection pool (water tower), the high current relay is controlled to realize the control.
• Small size, low power consumption, large switch capacity, strong anti interference, high functional stability.
• Stable realization of water pump when the pool (water tower) is short of water, and automatically stops when it is full.
• Using high quality materials, excellent performance, easy wiring, and long service life.

• Float switch is be able to adjust level of liquid, The float switch starts and stops work according to the water level line.household pools tank water tower to control pump work and also be installed on pumps to control motor working.
• Usage: Widely used in submersible pumps,Sewage pumps,pools, barrels, troughs and other containers of water, oil, acid and alkali in households, factories and mines.
• It's easy to adjust automatically, operating simply, safe, reliable, avirulent and environment friendly. Note: You must make the float switch stand up in the water to work properly

• AUTOMATIC OFF : Once your overhead tank is filled completely , Wavly will auto shut OFF the water pump.
• FOR MONOBLOCK AND SUBMERSIBLE BOTH : It can be used for municipal water supply or submersible.Made for everybody.
• COMPACT : A beautiful compact (4 inch X 4 inch) design which consumes less than electricity less than a mobile charger.More saving of money in your pocket.
• 1 YEAR WARRANTY : With high quality components embedded, you get 1 year warranty.But if gets broken we have easy replacement for you.
• EASY INSTALLATION : Requires easy installation and have user guide containing all the connection diagram as per different water supply/electrical connections.

• Corrosion free sensors
• Advanced embedded technology
• Suitable For: Single or three phase with all types of starter
• Display Type: LED
• Wired or Wireless: Wired

• Made from ABS plastic body,high grade PCB, for durability and performance.
• Overhead tank will have three sensors and ground level tank will have three sensors.
• Specially designed sensors that are plastic molded, corrosion resistant, non-conductive, low power, maintenance-free and safe for sensing levels in the tanks.
• System has three position power control toggle switch with \"auto\" mode, \"off\" mode and \"manual\" mode.
• Provide LED indication for Motor ON and OFF, water LOW and NORMAL.

• Cable Length : 2 Meter Corrosion Free Materi
• Can be Used With Tank Pools , Hydroponics, Salt water Tank, Fresh water tank, Gardening, aquariums for power head control, Pet bowls, fish tanks, filtration, RO , Water Coolers, Water Filters ,Dosing pumps Water Level Controllers etc.
• Caution : Your Project Should Not Have Mercury in It
• Ideal Operating Ratings : Voltage: 2 to 12V DC Current: 5 to 50mA DC, Max Switch Current : 500 mA (DC), Max Switch Watt : 10W
• Advance Magnetic Technology

• Float switch is be able to adjust level of liquid, The float switch starts and stops work according to the water level line.household pools tank water tower to control pump work and also be installed on pumps to control motor working.
• Usage: Widely used in submersible pumps,Sewage pumps,pools, barrels, troughs and other containers of water, oil, acid and alkali in households, factories and mines.
• It's easy to adjust automatically, operating simply, safe, reliable, avirulent and environment friendly. Note: You must make the float switch stand up in the water to work properly

• 1. It can test the pressure of the liquid
• 1. The float switch is a switch that regulates fluid level in the tank or well etc
• 1. The float switch is resistant to water(sewage water) it is relatively capable of being used for oil, most acids and alkalis
• 1. The float switch is not explosion-proof

• OPERATION MODE : When the water level is lower than the low-level sensor , the water pump is automatically started, & the overhead tank water level rises to a high level, then the water pump is automatically turned off.
• DRY RUN PROTECTION : Advanced embedded technology which stops the pump immediately in case of danger of dry-running. Also there are LED indications for full & empty level for both tanks
• THE SENSOR is durable, strong anti-corrosion stainless, safe and environmental protection without pollution.
• OPERATING VOLTAGE : Single Phase - 230V AC / 50 Hz
• Easy Installation : The installation is simple and convenient, it can be installed with screws or electric box tracks.

• Control both tank underground tank to overhead tank fully automatically
• Work With Any Single Phase Motor For Home ,Office ,Hospital,Restaurant
• Auto-Switch: -Automatic switch for water level control. This controller will sense the water level in the tank and will turn on and off the water supply automatically.
• It requires no manpower to operate as it switches on the motor when tank level is low and automatically switcher it off when the tank full. It is very useful product for your daily life as it save your time water and electricity.
• Fully Automatic Controller, Micro Controller Based Design, Power Failure protection. (Not Start Motor Every Time on Power Failure. )
• No Men Power Required To Operate As Fully Automatic with 2HP capacity
• Longer Life No Mechanical System /. Avoid Overflow

• 3 Mode Operations: Fully Automatic - Semi Automatic - Manual Mode
• Pure Wireless Installation with 2-3 Year Transmitter Battery Life on SIngle set of 3 AA Cells
• Shock proof with Dedicated Filter Technology.
• 24*7 water level indication with 4 level indication and error indication.
• Manual Control in all levels to start or stop the pump at any time.
• In case of any Fault very easy to Bypass.
• Low Power indication for Transmitter Unit to Replace Low batteries
• Long Range of 2-5 Kilometers / 50 Floors.

• Stable realization of water pump when the pool (water tower) is short of water, and automatically stops when it is full.
• Small size, low power consumption, large switch capacity, strong anti interference, high functional stability.
• Using high quality materials, excellent performance, easy wiring, and long service life.
• According to water level of the detection pool (water tower), the high current relay is controlled to realize the control.
• Water level sensor controller, supports automatic water pumping, filling and draining.

• Can be used for overflow protection, dry-running protection of submersible pumps
• It has a fully automatic operation functionality, helping it to drain and fill simultaneously.
• has various modes of operation as filling & draining, filling only one tank with dual levels monitoring, filling only one tank with single level monitoring, draining only one tank with dual-level monitoring, or draining only one tank with single level monitoring.
• Adjustable sensitivity level from 1k to 200k Ohm
• Specially designed corrosion and shock resistant plastic encased sensors to ensure trouble-free operation
• Includes provision for Manual start
• 2module size Compact Size Fits inside a standard MCB Distribution box
• Can be used for 1 tank or 2 tanks

• Single Phase Digital Fully Automatic Water Level Controller With All protection High volt, Low volt, Over Load & Dry Run Protection
• Voltage & Amp Display & Even Motor Fault Protection Display
• Contact capacity : 30 Amp, Up to 3 H.P. Supported
• With Manual ON-Auto OFF, Fully automatic and Semi Automatic Function

• Water pumps for domestic use