Electric Motors By CNCTOPBAOS

• Specifications of Motor: Holding Torque: 2N.m; Current: 4.2A; Peak Current: 6A; Phase: 2; Size: 57x57x76 mm; Step Angle: 1.8 degree; Motor Lead Wire: 4-wire; Encoder lines: 1000; Insulation Class:B; Motor Weight:2.4 LB
• Specifications of 2HSS57 Driver: 2-Phase Hybrid Stepper Servo Driver; Frequency: 0-200KHz; Insulation resistance: >=500M?; Voltage: DC 24-50V input;Pulses response frequency can reach 200KHZ; 16 kinds microsteps choice,highest 51200 microsteps/rev
• Advantages: Stepper motor closed loop system,never lose step; The stepper motor control has a new generation of 32-bit DSP. The vector control technology can increase the accuracy of the motor; Improve motor output torque and working speed; Automatic current adjustment based on load
• More Functions: It supports over-current protection, over-voltage protection, position outside the tolerance protection.The build-in place in position and alarm output signal can help the upper monitor to monitor and control,the function of position ultra difference alarm can ensure the machine work safely
• Widely used: Closed loop stepper system can be applied to all kinds small automatic equipment and instrument,such as milling machine, engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on;This motor driver kit fits all types of machine load conditions without adjusting the gain parameters

• Brief introduction: The DDCSV3.1 is a 4 axis motion controller,the highest output pulse per axis is 500KHz.This provides high control precision for stepper motors and servo motors.The DDCS operates as a stand alone system without the need of a computer
• Compatible with G code set: 5 inches TFT Screen ; Resolution ratio: 480x272 ;16 photoelectric isolated digital inputs ; 3 photoelectric isolated digital outputs ; All operations are controlled by only 17 keys and it supports the FANUC with high universality to be compatible with G code set,with 4G USB flash disk support for G code file input,no size limited of the G-code file
• Brief technical feature: 16 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs ; Analog spindle control 0-10V spindle control can be modified as PWM output; ARM9 main control chip,FPGA core algorithm chip ; Jog function for each axis continuous, step, defined distance; Customer can define the distance ; Support NPN type limited switch
• Power requirements: The Power Supply for the controller is 24VDC,DDCSV3.1 needs two power supplies,main power is for system,IO port is for input and output ports, Current is not less than 1A;Because of the IO power,system can supply the power for all IO ports.So no need the external power supply for IO port anymore
• Applications: The DDCV3.1 can be used for many styles and types of CNC machines. Lathes, CNC Routers,Pick&Place and Milling Machine,lathe machine and cutters are just a few examples

• Parameters: Power:2.2KW; Horsepower: 3HP; Input Voltage: 220V+/-15%; Output Voltage: 220V; Input Frequency: 50-60 Hz; Output Frequency: 0-1000 Hz; Input Phase: Single-Phase; Output Phase: Three-Phase; Current: 12.5A
• Features: no PG vector control and V/F two speed control modes;8-stage simple PLC function, multi-speed control and PID control;Support multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting
• Functions: I/O terminals can be programmed to combine multiple working modes according to user needs; With instantaneous power-down retention function;With over torque and under torque detection
• More Functions:Automatic voltage adjustment function to effectively solve the low frequency oscillation problem of high power motor;Provide a variety of fault protection functions: overcurrent, overvoltage, undervoltage, overheat, overload, lack of equal etc
• Wiring: L/N: Input power terminal; U / V / W: Input output terminal, connected to three-phase motor;DC+ / DC- : DC output + terminal, DC bus output terminal is used for connecting external brake unit or common DC bus system.;DB: Brake output terminal, connecting brake resistor between DB and DC+; PE: Earthing terminal

• Model: DMA860H Driver; Voltage input: 18-80VAC; Current: 2.0A-7.2A,resolution: 0.1A; Microstep: 400-51200 ppr; Signal input: differential/single end,pulse/direction or double pulse; Pulse response frequency: 200KHz
• Product Features: DMA860H The driver adopts differential interface circuit applicable to differential signal, single-terminal common negative and common positive interfaces, built-in high-speed optocoupler, allowing the reception of long line driver, collector open circuit and PNP output circuit signals
• Direction signal: High/low level signal. To ensure reliable commutation, the direction signal should be established at least five microns before the pulse signal. The initial running direction of the motor is related to the wiring of the motor. Interchanging any phase windings such as A+, A- switching can change the initial running direction of the motor, DIR- 4-5V at high voltage and 0-0.5V at low voltage
• Pulse control signal: The pulse rising edge is effective; PUL- 4-5V at high voltage and 0-0.5V at low voltage. To reliably respond to pulse signals, the pulse width should be greater than 1.2 microns. Series resistance is required if +12V or +24V is used
• Suitable motor: Can drive 4, 6 and 8-wire two-phase stepping motor,fit for Nema23 Nema34 Nema42 Stepper Motor;Also suitable for various small and medium-sized automation equipment and instruments, such as engraving machines, cutting machines, marking machines, engraving machines, plotters, CNC machine tools, automatic assembly equipment etc

• Name:MD430 Low noise of stepper driver;Model Number:MD430 TB6560 Single Axis
• Voltage:12-34VDC;Support Power Supply:DC
• Microstep:16
• Current:3.5A
• Suitable:NEMA17-23 stepper motor