Electric Motors By MECCANIXITY

• Motor mounting bracket is mainly used for motor, which mainly plays a fixing role. Mounting bracket is a good accessory for stepper motor and is widely used
• Motor mounting bracket, is in size of : 188mm x 101mm/7.4-inch x 4-inch(L*W)total size, 6.6mm/0.26-inch motor mounting hole dia, 70mm/2.76-inch motor mounting hole center distance, 6.4mm x 69.5mm/0.25-inch x 2.74-inch bracket mounting hole size, 70mm/2.76-inch bracket mounting hole center distance, 73mm/2.87-inch shaft hole dia
• Easy to install and operate, is a good replacement; Small size and lightweight; Steel material, durable and long service life
• Steps of installation: 1. Select motor mounting bracket of appropriate size; 2. Remove the motor mounting bracket to be replaced; 3. Installation
• Please select the appropriate size of the motor mounting bracket, especially the mounting hole diameter and mounting hole center distance

• Motor mounting bracket is mainly used for motor, which mainly plays a fixing role. Mounting bracket is a good accessory for stepper motor and is widely used
• Motor mounting bracket, is in size of : 100mm x 50mm/4-inch x 2-inch(L*W)total size, 3.5mm/0.14-inch motor mounting hole dia, 31mm/1.22-inch motor mounting hole center distance, 4.2mm x 33.8mm/0.17-inch x 1.33-inch bracket mounting hole size, 30mm/1.18-inch bracket mounting hole center distance, 22mm/0.87-inch shaft hole dia
• Easy to install and operate, is a good replacement; Small size and lightweight; Steel material, durable and long service life
• Steps of installation: 1. Select motor mounting bracket of appropriate size; 2. Remove the motor mounting bracket to be replaced; 3. Installation
• Please select the appropriate size of the motor mounting bracket, especially the mounting hole diameter and mounting hole center distance

• Motor mounting bracket is mainly used for motor, which mainly plays a fixing role. Mounting bracket is a good accessory for stepper motor and is widely used
• Motor mounting bracket, is in size of : 132mm x 65mm/5.2-inch x 2.56-inch(L*W)total size, 5.2mm/0.2-inch motor mounting hole dia, 47mm/1.85-inch motor mounting hole center distance, 4.2mm x 46.2mm/0.17-inch x 1.82-inch bracket mounting hole size, 40mm/1.57-inch bracket mounting hole center distance, 38mm/1.5-inch shaft hole dia
• Easy to install and operate, is a good replacement; Small size and lightweight; Steel material, durable and long service life
• Steps of installation: 1. Select motor mounting bracket of appropriate size; 2. Remove the motor mounting bracket to be replaced; 3. Installation
• Please select the appropriate size of the motor mounting bracket, especially the mounting hole diameter and mounting hole center distance

• Motor mounting bracket is mainly used for motor, which mainly plays a fixing role. Mounting bracket is a good accessory for stepper motor and is widely used
• Motor mounting bracket, is in size of : 100mm x 50mm/4-inch x 2-inch(L*W)total size, 3.5mm/0.14-inch motor mounting hole dia, 31mm/1.22-inch motor mounting hole center distance, 4.2mm x 33.8mm/0.17-inch x 1.33-inch bracket mounting hole size, 30mm/1.18-inch bracket mounting hole center distance, 22mm/0.87-inch shaft hole dia
• Easy to install and operate, is a good replacement; Small size and lightweight; Steel material, durable and long service life
• Steps of installation: 1. Select motor mounting bracket of appropriate size; 2. Remove the motor mounting bracket to be replaced; 3. Installation
• Please select the appropriate size of the motor mounting bracket, especially the mounting hole diameter and mounting hole center distance

• Miniature vibrating motors are used in a wide range of products, such as tools, scanners, instruments, GPS, and control sticks. Electric fans, electric toothbrushes
• Rated Operating Voltage:DC3V; Rated Vibration Speed:12000RPM; Typical Rated Operating Current:75mA; Wire length:65mm /2.56 inch; Motor Total Size:15.5mm / 0.61 inch; Body Size: 6mm x 10mm /0.24 x 0.39\"(L*W); Motor Head Size: 5*3*4.5mm / 0.2*0.12*0.18 inch(L*W*H)
• An eccentric rotating mass vibration motor (ERM) uses a small unbalanced mass on a DC motor when it rotates it creates a force that transform to vibrations.
• Developed for required vibra-call on their mobile / cell phones. Then the vibration is an excellent way to alert operators to an event.
• Easy to use, Fix the motor, and then connect the wires to use

• Motor mounting bracket is mainly used for motor, which mainly plays a fixing role. Mounting bracket is a good accessory for stepper motor and is widely used
• Motor mounting bracket, is in size of : 53mm x 50mm x 51mm/2.09-inch x 2-inch x 2-inch(L*W*H)total size, 3.5mm/0.14-inch motor mounting hole dia, 31mm/1.22-inch motor mounting hole center distance, 4.2mm x 34.2mm/0.17-inch x 1.35-inch bracket mounting hole size, 30mm/1.18-inch bracket mounting hole center distance, 22.1mm/0.87-inch shaft hole dia
• Easy to install and operate, is a good replacement; Small size and lightweight; Iron material, durable and long service life
• Steps of installation: 1. Select motor mounting bracket of appropriate size; 2. Remove the motor mounting bracket to be replaced; 3. Installation
• Please select the appropriate size of the motor mounting bracket, especially the mounting hole diameter and mounting hole center distance

• Vibration Motor Widely used in electric, hair dryers, model helicopter and other RC aircraft ,etc.DC motor for model airplanes, helicopters and other RC model electric, great replacement.
• The vibration motor we provide is in the size of:Rated Voltage: DC3V; Rated Current: 0.2A; Output Speed: 1100RPM;7300RPM
• Great replacement for the rusty or damaged DC motor on the electrical.
• Installation steps: 1. Remove the old vibration motor, and then connected to the new vibration motor wire
• Pay attention to the dimension of the vibration motor