Electricals Store - Home Improvement Tools & Testers

• Best Quality

• FTTH Equipent Accessories?Fiber optic tool bag,Optical Fiber Cleaver?Visual fault locator, optical power meter, fiber optic stripping pliers, cleaning bottle, cleaning paper, 2-in-1 fixed length device
• X5 Fiber cleaver's Fiber Fixture is suitable for bare fiber, pigtail and leather cable. Applicable to single fiber 0.25/0.9/3.0mm fiber. With Fiber Scrap Collection box, this fiber cleaver is compact and light-weight , convenient to carry and use.
• OPM:10 Standard Measurement Wavelengths 850/980/1270/1300/1310/1490/1550/1577/1625/1650nm, Test range: -70dBm~+10dBm.
• 30MW VFL:Accurate Identification This pen type fiber visual fault locator is specially designed to maintain fiber optic cables and wiring, It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light
• OPM:3 in 1 Function Optical power meter & RJ45 Network test & LED Lighting. It Needs 2 x AAA Batteries. (Note: Batteries Not Included in package

• 0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
• Measure up to 10A with direct input
• Dual display lets you check voltage and frequency simultaneously
• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)
• USB communications function supports PC measurements (optional)

• All electronic products must be used with a step down/up converter for Indian voltage compatibility
• All products are from the USA
• Clamp Meter

• Blue Sea's Mini OLED DC Voltmeter monitors DC voltage on a bright, waterproof, daylight readable OLED screen.
• Reverse polarity protected
• Mounts in a common 1-1/8\" hole
• Nominal Voltage: 12V DC | 24V DC
• Cut Out Dimensions: 1-1/8\" in

• T-RMS Measurement
• Data Hold To Freeze The Displayed Data; Auto Power Off
• Diode Test, Audible Continuity Test, Logic Test

• Use for SmartTone function of the Pro3000 analog audio generator for accurate pairing recognition.
• When touching wires together and momentarily shorting far end of a cable pair, for SmartTone technology will change cadence of tone generated.
• Tone change you hear through the probe positively verifies correct wire pair. For SmartTone provides 5 distinct tones for exact pair identification.
• Mainly used for testing telephone and LAN cables, high accuracy, safe and reliable, suitable for electricians.
• The network cable tester is made of high?quality materials, durable and wear?resistant.

• 1.NF-8209 is a new generation to offer AC filter and analog signaling all in one network toner and probe. It has three modes for options to track cable like AC filter mode, analog mode and PoE mode.
• 2.It includes cable length measurement , cable faults testing, PoE testing, hub blink and NCV function, all these makes it a must-tool for cabling engineers.
• 3.Identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard).Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M Hub/ switch.
• 4.Measure cable length and locate fault distance accurately for lan cable. the range is 200m.That means it's equipped with the most powerful cable location technologies for any work environment.
• 5.Test physical status for STP, UTP lan cable. Detect AC voltage presence (50V-1000V).

• This instrument is a highly sensitive \"FET electronic tester\" having the DC voltage function of which the internal resitance is as high as 2.5?12M?, and also the DC current function with the 0.12?A range.
• Can also measure P-P value(the value between positive and negative peak values on sine wave alternating current) and very small electric current.
• The frequency characteristic of AC low voltage ranges(3V and 12V) is 40Hz?1MHz(sine wave AC)
• The Vp-p of triangular-wave, square-wave over 20% duty cycle voltages of waveforms can also be measured(at 3V range)
• Zero center meter(NULL) of DC Voltage and DC Current

• Ideal Where Reliability and Dependability Are Required

• Accurate Electrical Measurements: The MT-2207-C Analog Multimeter provides precise readings of voltage, current, and resistance, ensuring accurate electrical measurements for a wide range of applications.
• Protective Function for Added Safety: This multimeter features a protective function that safeguards both the meter and the user from potential voltage spikes or overload situations, ensuring safe and worry-free operation.
• High-Quality Construction: Built to last, the MT-2207-C is constructed with sturdy materials and high-quality components, guaranteeing long-lasting durability and reliable performance for years to come.
• Versatile and User-Friendly Design: With its analog display, easy-to-use controls, and ergonomic design, this multimeter is suitable for professionals and DIY enthusiasts alike, providing comfortable and convenient operation during extended use.
• Additional Safety Features: The MT-2207-C includes a built-in fuse and overload protection, offering enhanced safety and peace of mind during electrical measurements and troubleshooting.

• High-precision current measurement, HT208D multimeter has VFD function/loop is not affected by high-frequency harmonics, look for calibration source for adjustment, measurement is more accurate, LowZ low-impedance voltage measurement, to prevent false voltage caused by false degrees
• VA high-definition color screen, equipped with a large-screen LCD screen, can clearly display the measurement results, and the battery cover is easy to remove, low-power design, three AAA batteries, easy to replace, long-lasting battery life, NCV non-contact voltage detection, by measuring the electromagnetic field The strength effectively checks the electrical status, without touching any wires, safe maintenance
• MAX/MIN value measurement, peak value capture, one key to open, long press to close, simple and fast measurement results, effective T-RMS, arbitrary waveform AC signal measurement, true RMS, can accurately measure all current waveforms, wide application range
• The clamp head structure is derived from the practical patented design and original research and development. The large jaw design has strong anti-interference. The test pen on the back of the jaw can be stored, which is anti-lost and portable. At the same time, the clamp head has LED lights for auxiliary lighting, allowing you to stay in the dark. can also operate normally in
• AC current measurement, high-precision 0-1000A range, wide application range, jaw opening width of 26mm, can measure most cables on the market, at the same time, in order to make customers feel more comfortable using the product, we provide 24 months of after-sales service and lifelong technical support. If you have any dysfunction in the process of using the product, you can contact us at any time to solve it

• DMT-99 is FNIRSI's newly launched 10000 count intelligent digital multimeter, with a wider measurement range and higher resolution, helping you measure more accurate values.
• It can accurately measure AC/DC voltage, AC/DC current, 10A current, and can also be used to test conductivity, capacitance, frequency, duty cycle, resistance, diode, temperature, NCV, live wire, etc.
• Suitable for various fields of electronic maintenance such as engineering, laboratories, cars, and home appliances. Pushbutton design allows for one-handed switching for convenience and efficiency.
• Equipped with a 2.4 inch full color TFT display screen with a resolution of up to 240 * 320, a new UI interface design, and the first monitoring mode function, enriching your use experience and making operation more convenient in various scenarios.
• When the measured value is greater or less than the set threshold, the device's buzzer will sound and the display will indicate at the same time. Full gear overload protection, built-in intelligent anti-burning chip and double ceramic fuse, with overload protection to prevent damage to the intelligent digital multimeter by misuse.

• LARGE LED SCREEN: The 11in adjustable brightness LED display of classroom noise meter allows you to see real time levels of decibels, temperature and humidity.
• AUTO ALARM ICON: The noise alarm icon will switch automatically when the decibel level is different, green means less than 60dB, yellow means 60 to 75dB, orange means 75 to 85dB, red means 85dB or more.
• MULTIFUNCTIONAL: This versatile wall mounted noise meter can measure sound from 30 to 130 decibels, as well as humidity, temperature, and accuracy.
• LONG USB CABLE: The noise meter is powered by a 2000mAh Li ion battery and comes with a 9.8in (300cm) long USB cable for charging without worrying about the USB cable being long enough.
• WIDE APPLICATION: This decibel meter can be hung on the wall or placed on a table and is ideal for testing sound levels on traffic routes, construction sites, homes, and offices.

• Designed to test installed twisted pair wiring;
• Imported Item Ships directly from USA
• Custom Duties, all taxes, International Shipping Charges are included
• 100% Genuine item
• Assured delivery in 1-3 weeks