Electricals Store - Home Improvement Tools & Testers

• [LCD Screen] The electronic load tester has LCD screen, and it can display information comprehensively and clearly.
• [Cooling Fan] The electronic load tester has configuration of intelligent fan, which can dissipate the heat effectively and quietly.
• [Wide Application] The electronic load tester can test various batteries, DC power supply, and charging data lines.
• [Protection] The electronic load tester has over-voltage, over-current and over-pressure alarms, which can effectively protect the module from damage.
• [Parameter] The maximum power of the load of the electronic load tester is 150W, the maximum voltage is 200V, and the maximum current is 20A.

• Interchangeable probes for a wide range of testing possibilities
• Compatible with most multimeters and scopes with standard 4mm connectors
• Kit includes 43\" long 4mm banana test leads with straight and 90 Degree connections, test probes, long back probes, safety test probes
• It also includes crocodile clips, female-to-female adaptors, male-to-female adaptors, small alligator clip with male banana and slotted ring adapters
• Includes roll-up storage pouch to keep leads and adapters organized

• Enables VOM to be stored for quick field use
• Test leads can remain in panel jacks
• Thick padding protects meter.

• Versatile tool tests both RJ45-CAT5/6 and Coax cables
• Ruggedized for field use with no breakable LCD screen
• PASS/FAIL results appear in one second and each pair's status is highlighted
• Performs a complete TIA568 test: continuity, opens/shorts, reversals and split pairs
• Auto-off (12 seconds) and low battery indicator help maximize your battery life
• Included components: belt clip, rj45 cable coax terminator, case, and 9v battery

• Operating range of 3-49 volts DC to work on most vehicle electrical systems
• Two LEDs provide 360 Degree visibility of polarity
• The red light indicates positive polarity, green indicates negative polarity
• Long, 12ft coil cord and heavy-duty alligator clamp for secure connections
• The probe is insulated to prevent the possibility of shorting the side of the probe to other components Computer safe

• 600V Cat III Safety Rating / 50% higher display with bright white backlight/ Exceeded voltage indicator/ Frequency and temperature measurement/ Voltage, resistance, continuity and capacity/ Input terminal for AC and DC current measurements for 10A current/Diode test, data retention
• Multimeter
• Model Name: FLUKE-17B+
• Included items: 1 Digital Multimeter + TL75 Test Tip Set + 2 AA Batteries + Thermocouple + User Manual

• VERSATILE FUNCTIONALITY: Measures AC/DC voltage up to 600V, 10A AC/DC current, 50M resistance; additional features include continuity, temperature, capacitance, frequency/duty cycle and diode test
• LEAD-ALERT PROTECTION: LEDs on the meter illuminate to indicate proper test lead placement, enhancing accuracy and safety during measurements
• REVERSE-CONTRAST DISPLAY: Large, high-visibility reverse-contrast LCD ensures improved viewability in all lighting conditions
• ACCURATE MEASUREMENTS: Auto-ranging and True Root Mean Squared (TRMS) technology provides precise and accurate measurements
• PORTABLE DESIGN: Slim profile allows the multimeter to conveniently fit into most pockets, making it easy to carry and use on the go
• DURABLE CONSTRUCTION: Built to withstand a 6.6-Foot (2 m) drop, perfect for use in facilities, maintenance, HVAC, residential, business, automotive, and light-industrial work
• COMPLETE PACKAGE: Includes carrying case, test leads with CAT III/CAT IV safety caps, thermocouple, instructions, and 2 x AAA batteries

• IDEAL FOR ROUTING POWER ELECTRICAL TOOLS It gives electricians complete control and flexibility to navigate cables behind wooden stud walls, paneled walls, plasterboard walls, even 25MM framed walls, and under floorboards and carpet.The swivel leader eyelet lets you connect accessories like a pulling grip. It securely connects to most wires and mesh wire pulling grips. And the non-marring leader navigates around obstructions up to 20 feet.
• TWO SHAPES OF MAGNETS The cable fishing tools can pass through the holes of different sizes. This innovative leader-pull design navigates the cable through the enclosed spaces smoothly, through insulation and other obstructions, then allows you to pull the cable under the floor to your access point.
• LARGE MAGNETS JUMP OVER OBSTACLES You?re making sure the cables have a clear path to run through while unknowing exactly where it is.The strength of the magnet is what makes this tool what it is, Large magnets can quickly jump over water pipe obstacles. You can quite easily run it underneath floorboards with accuracy.
• SAVE YOUR TIME Eliminate damage to walls and numerous trips in and out of attics while on the job.you can't be intrusive into the walls too much, where you need to get cables down the back of a cavity wall, or in an open space wall where you can't cut into the fabric of the building. Zezzo Snap Wire Guider allows you to work smarter, not harder
• UNIQUE GIFTS FOR MEN Powerful zezzo wire mag puller tool is ideal for unclear path. It will be a fantastic gifts for elders, diy handyman, father/dad, husband, boyfriend, him an women. A great tech gift choice on birthday, valentine's day, father's day, christmas stocking stuffers, thanksgiving day etc.

• Voltage Drop test with the push of a button
• Finds corroded wires, loose connections, bad grounds, cut wires, shorts and other forms of resistance
• Loading circuits finds problems fast. If the part quits, don't swap it. Test first with LOADpro and never make a mistake
• For use on 12 to 48 volt electrical systems

• TFT LCD SCREEN: 3.5-inch 480x320 high resolution TFT LCD screen with backlight, 55000 counts, DC voltage accuracy up to 0.05%, dual line display supported, providing a clear and prescise display.
• EASY TO USE:The digital multimeter can test AC / DC current, AC / DC voltage, resistance, capacitance, etc, with diode testing, continuity, temperature and other functions.
• REMOTE CONTROL: Manual or auto record the measured data into internal memory, and displayed in table SCPI supported, remote control the multimeter through PC software USB (or RS232) port.
• WIDE USE:The true RMS multimeter is made of high quality ABS meterial, an excellent tool for instruments and laboratories, factories, radio enthusiasts and families.
• REPLACEABLE FUSE: Anti-burn design, safe and reliable. The line fuse is in the plastic fuse box below the power line input on the panel. Equipped with spare fuse, more convenient and cost-effective to replace the fuse.

• Multimeter Function: It's not only a clamp meter, but also with multimeter function, you can test AC DC current/voltage, resistance, capacitance, Diode.
• mA levelAC/DC resolution: 100A 1mA high resolution, it can test small current, multi-function fast response.
• NCV Test: It with noncontact electric field measure if you want to measure whether there is AC Voltage or electromagnetic filed, you can chose range.
• Small and Exquisite: You can put it in your pocket for easy carrying.
• VFC function: Can reduce the interference of high-frequency signals on the measurement results.

• Digital multimeter measures alternating current (AC) voltage and direct current (DC) voltage to 600 volts (V) and resistance to 34 mega ohms
• Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform
• Meter measures 5.1 x 3.1 x 0.6 inches (H x W x D) and can be carried in a pocket
• Liquid crystal display (LCD) shows readings both in digits and on a bar graph
• Meets International Electro technical Commission (IEC) safety standard 61010 and is certified for category II installations up to 600V and category III installations up to 300V

• Smaller, Simpler and Smarter. Use the Gen2 Tester to test PoE Cameras, VOIP phones, and WiFi installations without interrupting data flow
• High quality LCD display allows you to quickly identify PoE type. Measure power from DC power supplies and activate any port on an AF/AT PoE switch
• 802.3bt support 4-pair testing capability makes the GEN2 ready for the new standard
• Increased testing range measures DC power supply voltages from 3.5 to 56 volts and current up to 280 watts at 56 volts

• Storing 100 sets of data and 10 waveforms independently. Capable of holding waveform and data during measurement, easy to view and analyze. Displaying historical data and real-time measurement on the same screen with particular record reading mode for easy comparison.
• Digital multimeter with 50M high-speed A/D sampling, 6000 counts auto-range, one-button switch of graphical waveform display during measurement. High reliability with panel calibration technology and memory calibration, sparing the need for adjustment with potentiometer.
• Analog broadband range up to: D AC ~ 10MHz, Display hold, storage / readout up to 5 waveforms and 100 sets of measurement values. 128X64 high contrast LCD with LED backlighting. Suitable for working at night. DETECTION ALSO Protect safety.convenient for small capacitors to measure quickly.
• DC voltage 6 ~ 1000V, AC voltage 6 ~ 750V, DC/AC Current 6A/10A, Resistance 600 ~ 60M?, Capacitance 0 ~ 20?f, Frequency 5 ~ 10MHZ, Diode / Continuity Test, Remote control test AC voltage bandwidth up to 20KHz. Innovative design for the one-key silent mode, quiet in mastery. Extending battery life with automatic shutdown function.
• Built-in 250V/10A explosion proof fuse, 20A AC and DC test. 0mf gear position: high capacitance and high accuracy are guaranteed. Realizing one-button automatic waveform capture, operator-friendly to learn and operate. Effectively eliminating lead resistance, distributed capacitance or interference signals with relative value measurement (clearing).

• SPECIFICATION: Fiber optic launch cable box is designed to have a long length up to 500 meter, also has a low loss that is less than or equal to 0.5dBm/km, can meet your requirement
• GREAT SEALING: There is no splice in the middle of single mode launch cable, and the excellent sealing is waterproof and explosion proof, offer you better using experience
• FUNCTION: OTDR dead zone eliminator is mainly applied to make up for the blind spot of OTDR test to detect the dead zone as well as eliminating it
• COMPACT SIZE: Dead zone eliminator fiber box comes with a compact size and a light weight, the convenient carrying and storage will simplify your working
• MATERIAL: Singlemode fiber optic cable box adopts high quality fibre and plastic materials, strong and sturdy, has long lasting

• FTTH Fiber Optic Tool Kit Set Include Cable VFL OPM Cleaver Adapter PP Bottle Clean Paper Stripper Tools Bag.Easy to use,compact, economical.
• FC-6S optical fiber cable cleaver is available with a single fiber dapter for 2FC-6S optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers It is a simple peration for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving50 to 900 micron coated single fibers It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving
• The quickly cold connector tools set is a multi-purpose toolkit it can provides the tools necessary for the assembly of mechanical splices and it will bring you a higher working efficiency 1mW Visual Fault Locator Fiber Optic Cable Tester Meter
• Optical Power Meter Test Rang -70~+10 dBm; with FC and SC Adapter ;Test wave:850/980/1300/1310/1490/1550/1625nm
• Visual Fault Locator VFL with 2.5mm universal connector of the detector is compatibly designed for ST, SC, FC interferes both in circle and square shape of different fiber optic cables.Test for both single-mode and multi-mode cables.