Industrial & Scientific Store - Additive Manufacturing Products

• Excellent adhesion, ultrabase covered by microporous coating, shows strong adhesion in printing.
• Very easy to take off the models, no tools needed when removing models.
• Use clips to fix the glass plate on the hot bed, super flatness, fast and uniform heating.
• High temperature higher sticky, the models will stick on bed firmly when temperature is high.
• Durable, the special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400?C.

• Material: ABS
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 30 meter; Diameter: 1.75mm
• Color: Blue ; Temperature; 240 degreeC - 260 degreeC; Heatbed Temperature: 80 degreeC (min)
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Material: PLA
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 30 meter; Diameter: 1.75mm
• Color: Yellow ; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Type : LMK8LUU square flange long linear bearing
• Inside diameter : 8mm
• Outer diameter : 15mm
• Total length : 45mm
• Package content : 1 pc LMK8LUU

• Outside Diameter: 8mm; Thread Type: Square Thread (ACME Trapezoidal)
• Length: 300 mm; Pitch: 2mm
• Rod Material: Stainless Steel; Nut Material: Brass
• Qty: 1pcs 8x300mm Rod + 1pcs Brass Nut
• Application: 3D Printer, CNC, Robotics, DIY Projects etc

• Suitable for E3D V6/ V5
• Version: Titanium alloy
• Screw: M6
• Nozzle size: 0.4mm
• For 1.75mm Filament

• Cable length: 1 meter
• 6pin XH2.54 Female to 4 Pin Dupont Female cable
• One end is 4pin DuPont connector head, another end is 6pin XH2.54 white terminal
• Suitable for NEMA 17 Motor, Ramps 1.4 & CNC Shield
• NOTE: For connection see the picture. Please check your motor and circuit connections before making a purchase. Wire colour can be different as shown in picture. Wire will be supplied as per stock availability. if you have specific colour requirement please confirm with us before placing order.

• Material: PLA
• The filament is for 3D printing pen used to melt plastic at a high temperature
• Length:10 meter; Diameter: 1.75mm
• Color: Pink; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 1-5mm deviation due to manual measurement.

• These dampers are used for reducing stepper motor noise and vibration. Excellent anti-vibration dampers for quiet stepper motors.This item included dampers made of high quality metal and rubber, durable in use.
• Stepper motors are affected by resonance. Resonance is caused by parts vibrating in concert with each other, which can be lessened by fitting a stepper motor anti-vibration damper.
• These energy- absorbing rubber mounts with a metal mounting face.
• Suitable for CNC 3D printer stepper motor.
• Package Include 3 x Nema 17 Vibration Damper

• Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament (Genuine Capricorn Premium Tubing)
• Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament (Genuine Capricorn Premium Tubing)
• Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament (Genuine Capricorn Premium Tubing)

• ACEME NUT BLOCK FOR M8 LEAD SCREW FOR 3D PRINTERS, CNC ROUTERS, LINEAR MOTION
• This 8mm Acme Nut Block is a great choice for many projects requiring lead screw linear motion. It serves more than one purpose in that it can be mounted to the bottom of a 3mm/1/8\" plate utilizing M5 nylon insert nuts and 15mm M5 screw or can also be mounted directly to V-Slot utilizing two channels with 15mm M5 Low profile screws and two tee nuts. These mounting choices allow for a host of modular machine applications.
• Tr8*8(p2) Metric Acme Tap Pitch is 2mm starts is 4 Lead is 8mm Use in conjuntion with the 8mm Metric Lead Screw

• Print temperature: 210 - 225 degreeC.
• Print bed temperature: 120-140 degreeC
• Good dimensional stability, resistance to water absorption, and high tolerance

• A4988 DRV8825 3D PRINTER STEPPER MOTOR DRIVER CONTROL EXTENSION SHIELD If jumper is hit the position of ON DP, that means 16 segment (4988) or 32 segment (8825)Jm connected motor
• connect 5v and 9v power supply E, S, D, G, respectively corresponding to the connection of the Enable/Step/Dir/Gnd drive signal output

• Model : FL003
• Shaft Diameter : 17mm (for which bearing is used)
• Size : 70x45x18mm
• Mounting Base Hole Diameter : 7mm
• Mounting Base Holes Centre Distance : 56mm

• UPGRADED PLA
• High-quality PLA
• Metal fill copper