Industrial & Scientific Store - Additive Manufacturing Products

• Multiple Nozzle Options -The original nozzles include 0.3mm-240?C, 0.4mm-240?C, 0.4mm-265?C, and 0.6mm-265?C. We have also recently developed a 0.6mm-265?C hardened nozzle and a 0.4mm-240? high-speed nozzle. These options allow you to customize your printing experience based on different requirements.
• 0.4mm-240? High-Speed Nozzle -The high-speed nozzle enhances efficiency, reduces production time, and maintains print quality. When installed on Adventurer 4 3d printer (firmware upgrade required), it achieves a maximum printing speed of 200mm/s. For Adventurer 3 Pro2 and Adventurer 4 Pro models with the high-speed nozzle installed, the maximum printing speed reaches 300mm/s.
• 0.6mm-265?C Hardened Nozzle -They offer enhanced durability and expanded material compatibility, allowing them to withstand abrasive filaments and maintain dimensional accuracy. With a longer lifespan, they ensure consistent extrusion and precise filament flow. They enable the printing of specialized materials and reduce the need for frequent nozzle replacements.
• Quick Detachable Nozzle -Patented nozzle design allows for tool-free disassembly within 3 seconds. Simply press the release ring to remove the nozzle, facilitating easy maintenance. Note: Nozzle replacement should be performed while the printer is powered off.
• Ensuring Nozzle Quality -Each nozzle has undergone print testing, so there may be some residual filament. Simply heat the nozzle and click the retraction button to clear it.

• Matte Finish This newly 3D printing filament outputs prints with smooth and non-glossy colors. Qidi PLA matte filament 1.75 has an incredible matte surface finish that helps hide the layers of your print. It's perfect for creations that require an understated, mysterious appearance.
• PLA Matte filament 1.75 - Suitable for High-speed Printing PLA Rapido Matte is a new type of pla matte filament newly developed by QIDI TECH. Compared to ordinary PLA filaments, QIDI PLA Rapido matte can be used for high-speed printing, with printing speeds of up to 400mm/s. We highly recommend to use it with QIDI TECH's newly developed X-Smart3 3D printer.
• Tangle Free & Moisture Free QIDI TECH PLA Rapido Matte filament 1.75mm is fully mechanically wound and strictly inspected manually, ensuring the line tidy and less-tangle, so as to avoid snap and line breaking. It is dried and vacuum sealed in a package with desiccant.
• Eco-Friendly & Wide Compatibility Made from starch raw materials derived from renewable plant resources, PLA matte filament boasts lower melting temperature, even does not need a heated bed. Odorless, no pollution and non-toxic during the printing. QIDI TECH PLA Matte Rapido filament is perfectly compatible with most FDM 3D printers on the market that use 1.75mm filament.
• Dimensional Accuracy & Consistency QIDI TECH 3D Printer PLA Matte filament of 1.75mm diameter, Dimensional Accuracy +/- 0.02mm. The strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding and smooth outflow of PLA Rapido Matte filament through the extruder, coming out more uniform.

• Clog-Free & Bubble-Free Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking.

• ABS Strong 3D Filament QIDI TECH ABS 3D filament is a type of strong and durable filament, ideal for printing durable items or functional parts that require higher heat resistance.

• Premium Material: TEQStone Silk PLA filament is made of high-quality Polylactic Acid (PLA) material, which is more resistant to deformation than traditional PLA filament, and has a low shrink rate.
• High Precision: The diameter of TEQStone Silk PLA filament is +/-0.02mm, ensuring high precision and excellent print quality. The filament has a consistent diameter, which ensures smooth feeding and fewer jams during printing.
• Wide Compatibility: TEQStone Silk PLA filament is compatible with most FDM 3D printers on the market and is perfect for a variety of projects, including prototypes, models, and decorative items.
• Beautiful Appearance: TEQStone Silk PLA filament has a beautiful and silky texture, with a smooth and glossy finish that makes your prints look more refined and professional. It comes in a variety of bright and beautiful colors, making it perfect for creating colorful and eye-catching designs.
• Vacuum Packaging: TEQStone Silk PLA filament is carefully packaged in a vacuum bag to prevent moisture and dust from damaging the filament. The neatly wound spool makes it easy to feed the filament into your 3D printer.

• Amazing Color Changeable PLA: FilaBees PLA Burnt Titanium made of specialized pigments and hides the layer lines perfectly, it reacts to different levels of light with a shiny appearance and excellent gloss smoothness
• Smoothly Printing: FilaBees 3D Printer filament has good ductility and stronger toughness, making it less brittle than usual PLA. Our 3D printing filament will feed more smoothly and won't break in the tube, the printing will be smoother and won't jam the nozzle. Ideal for 3D printing high quality models and objects
• Excellent PLA Filament: FilaBees 3D Filaments has the feature of no clogging, no bubbles, no tangles, no warping, no drawing, and easy to use, which effectively reduces the risk of knotting
• Professional Package: Vacuumed and sealed with high-quality desiccant to keep the PLA filament dry and keep out dust. 100% mechanical winding and strict manual examination, ensure the line tidy and less-tangle, so as to avoid possible snap and line breaking.NOTE: Please pass the filament through the fixed hole to avoid tangles after use
• Wide Compatibility: FilaBees filament is cost-effective and reliable for most FDM 3D printers

• [Finer and Denser Glitter Powder]- The ZIRO diamond filament is made of premium raw material with ultra finer and denser glitter powder than others, featuring stunning visual effects to your works. With higher strength, no odor, no warp, clog-free, and bubble-free. Allowing 3d printing enthusiasts to create amazing works with fewer issues.
• [Neatly Wound and Tangle-free]-Our ZIRO filament uses full mechanical wire winding to avoid tangles and knots during printing. And completely drying for 24hrs before vacuum sealed. Moisture-free and bubble-free to make 3d printing much easier. (Please remember to store the filament with the re-sealable bag after use to keep it dry)
• [1.75MM Filament Accuracy ]- Advanced CCD diameter measuring control the dimensional accuracy of the PLA is +/- 0.05mm. The strict tolerance guarantees that ZIRO filament printing is easier and more stable. Suggested printing settings, nozzle: 190-220?C, bed: 50-60?C, speed: 30-90 mm/s.
• [Fits For Almost All FDM Printers]- ZIRO 3D printing filament works perfectly with most printers on the market. A plastic reel with a larger inner diameter design makes feeding smoother. Spool diameter: 7.99inch, spool width: 2.48inch, hub hole diameter: 2.36inch.
• [What You Will Get]- 1KG diamond-purple PLA + a free reseal bag + a 5M cleaning filament + a 5M random filament sample. And our friendly customer service. If you have any questions or suggestions, please get in touch with us. We will do our best to solve your problem.

• Color Changing PLA Filament?Color Changing with Temperature.
• Color Changing around 31?C:Under 31?C it looks Orange and above that it starts getting Yellow.
• Widely compatible: Support almost all FDM 3D printers on market.
• Industrial & Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament
• Premium Quality Guarantee,Within 24 Hours Reply,100% Satisfaction Guarantee.

• Certified Food Grade and Food Contact Safe -- Extruded from REVODE110 Polylactic Acid Resin. Naturally derived from renewable plant resources. CARBON PLA+ Filament is Food Grade Certified by both T?V S?D and SGS with reference to 21 CFR 175.300 of The U.S. Food & Drug Administration Code of Federal Regulations (FDA 21 CFR 175.300). Certificate included in listing images. REVODE110 has a low carbon footprint, is a renewable, low order and environmentally friendly, reducing white pollution.
• Lab Tested -- Most PLA Filaments are not safe for contact with food. To be considered Food Grade the Material must meet certain chemical requirements, which are specified by the FDA Code of Federal Regulations. The Material should be Laboratory tested in accordance with FDA 21 CFR 175.300. PLA+ filaments can be produced from Food Grade and Non-Food Grade Raw Materials. CARBON by Comfy Materials PLA+ is lab certified by both T?V S?D and SGS, in compliance with FDA 21 CFR 175.300.
• Smooth Printing -- REVODE110 is one of the easiest resins to extrude and thermoform with. Advanced CCD diameter measuring and self-adaptive control system in the manufacturing produces PLA+ filaments of 1.75 mm diameter, with dimensional accuracy of: +/- 0.02 mm. A stable dimensional accuracy ensures a smooth feeding experience.
• Mechanical Properties and Consistency -- Use REVODE Polyactic Acid Resin for both 3D Printing and Injection Molding. CARBON by Comfy Materials PLA+ maintains Mechanical Consistency throughout your Project. Tensile strength (X-Y): 35 1.1 (MPa), Deflection Temperature: @0.455 MPa (66 psi) D 648 61.5 ?C (142.7 ?F), Processing Melt Temperature: 190-220 ?C.
• Professional Packaging & Compatibility -- Filament is vacuum packaged with desiccant to keep filament dry and free of dust and foreign particles. CARBON by Comfy Materials PLA+ is perfectly compatible with most FDM 3D printers, that support 3rd party materials. These include: Makerbot, Zortrax, Quidi, Prusa i3 MK3, M3D, Robo 3D, Wanhao, Creality Ender 3, Monoprice, FlashForge and more.
• Printing Temp and Nozzle Recommendation -- Recommended Extrusion/Nozzle Temperature: 190?C - 220?C. We recommend replacing your brass nozzle with a stainless steel nozzle and using an all-metal hot end. Brass nozzles run the risk of containing lead, which can be dangerous for your health if consumed.
• Food Safe Suggestions -- We suggest that you use a stainless steel nozzle and a stainless steel all-metal hot-end. Use a separate nozzle and hot end for Food Grade models. A second hot-end will keep your Food-Grade prints free from contaminants.
• Food Safe Slicing and Model Finishing -- Depending on your slicing methods, your 3d Printing Machine, your finishing process, and your intended usage, the Food Safe Quality of your end product may change. Be sure to properly finish your models and use an appropriate sanitizer between uses of your end product. Printing solid models is advised.
• Difference Between Food Grade and Food Safe -- Food-Grade means that the material is fit for human consumption or permitted to come into contact with food. Food-Safe means that the Food-Grade material is also fit for purpose, for its intended use, and will not create a food-safety hazard. For example, it may be fit for purpose to use a Food-Grade container to hold a dry ingredient, but that same container may not be fit for purpose to be used to hold a hot liquid.
• Food Safe Considerations -- Just because a material is permitted to come into contact with food does not necessarily mean it is Food-Safe. Our Filament is Food Grade, and without modification is also Food Safe. Once the Filament is molded or extruded into a new shape, by the end user, the Food Safe Qualities need to be reassessed.<

• [Finer and Denser Glitter Powder]- The ZIRO diamond filament is made of premium raw material with ultra finer and denser glitter powder than others, featuring stunning visual effects to your works. With higher strength, no odor, no warp, clog-free, and bubble-free. Allowing 3d printing enthusiasts to create amazing works with fewer issues.
• [Neatly Wound and Tangle-free]-Our ZIRO filament uses full mechanical wire winding to avoid tangles and knots during printing. And completely drying for 24hrs before vacuum sealed. Moisture-free and bubble-free to make 3d printing much easier. (Please remember to store the filament with the re-sealable bag after use to keep it dry)
• [1.75MM Filament Accuracy ]- Advanced CCD diameter measuring control the dimensional accuracy of the PLA is +/- 0.05mm. The strict tolerance guarantees that ZIRO filament printing is easier and more stable. Suggested printing settings, nozzle: 190-220?C, bed: 50-60?C, speed: 30-90 mm/s.
• [Fits For Almost All FDM Printers]- ZIRO 3D printing filament works perfectly with most printers on the market. A plastic reel with a larger inner diameter design makes feeding smoother. Spool diameter: 7.99inch, spool width: 2.48inch, hub hole diameter: 2.36inch.
• [What You Will Get]- 1KG diamond-black PLA + a free reseal bag + a 5M cleaning filament + a 5M random filament sample. And our friendly customer service. If you have any questions or suggestions, please get in touch with us. We will do our best to solve your problem.

• Upgrade Double Screw ?Screw with nut, High precision, High transmission, low noise.
• Precise and Smooth Screw ?The guide rail precision is P3-P7. the repeated positioning accuracy reaches 0.01 mm. high loading ability and high running speed meet the high-speed running requirement.
• Selected High Quality Steel ?Exquisite screw rod, made of high-strength steel, has high hardness wear resistance, strong load-bearing, smooth cut without burr clear lines, stand wear and tear.
• Dust-Proof and Mute Design ?Elaborate craft, good sealing performance, good dust-proof smooth sliding and maximum mute in high-speed operation.
• High Quality Motor ?High quality motor is efficient and reliable with high speed and low noise.

• A upgrade Replacement printing platform-Round JanusBPS 270mm/10.6inch, compatible with Flsn Super Racer model. This steel plate is Double-Side Coated, one side with Gold Powder, another with a Smooth PEI pre sticked, comes with a magnetic base.!!!Please re-measure your build plate before ordering, not rely on its printing size area.
• Flexible, removable, can stick very well. The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! High strength and heat resistance. Both sides can be used to print, just flip it over, more convenient. The pei sheet is pre-sticked by machine, no worry about the bubbles, please peel off the profective film on the pei surface before using.
• Double sides can be used and easy to install: simply stick the bottom sheet onto your heated bed, then place the steel platform on the top. When you auto-level and mesh auto level with Kliper software on your PEI sheet, if it's done on the textured side, it will create fluctuations with the auto-level system since it is textured. ONLY using auto-leveling on smooth side PEI, everything will work perfect.
• Most filaments, such as pla, petg, can print directly on to the pei surface without the need for additional adhesives, tapes or slurry. Kindly note printing ABS needs a thermal insulation environment.
• Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it. Just wipe down with isopropyl alcohol between prints for best results.

• Includes: 1 Post Base Plate; 4 Decorative Plates; 8 Hex Cap Nuts; (8) 1/4 by 3-3/4-inch OWT Timber Screws
• Fits all standard 4 by 4-inch from 3-1/2-inch up to 4-inch square
• Can be mounted to concrete, wood, stone or Oz-post (surface mounting hardware not included)
• 3/16-inch thick hot dipped galvanized and powder coated steel
• Raised base keeps wood post elevated from ground contact; Recommended for pergolas, decks, veranda posts, pavilions, arbors, and railings

• Epoxy Coating for 3D Printed Objects
• Smooths 3D Printed Objects
• Compatible with SLA and SLS prints.
• It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.
• Imported from US. Brand new