Industrial & Scientific Store - Additive Manufacturing Products

• Application: Great for linear motion on 3D printer, CNC, and other applications
• Single Size: Inside diameter: 8mm(0.31in), outside diameter: 15mm(0.59in), total length: 24mm(0.94in)
• Usage: Ball in the cage loop to run a smooth ball guide surface to ensure even if high-speed operation, low noise
• Material: Made of high quality steel, durable and sturdy for use
• Usage: Great for you to replace the damaged ball bearings in your devices to improve efficiency and save energy

• Product Name: Linear Rail Shaft Support; Model: SK10
• Package Content: 2pcs x Linear Rail Shaft Support
• Material: Aluminum; Color: Silver Tone
• Fit for Shaft Dia.: 10mm/0.4-inch; Total Size: 42(+/-2) x 14(+/-2) x 33(+/-2) mm (L*W*H)
• Mount Hole Distance: 33mm; Mount Hole Dia.: 5.5mm

• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 10 meter; Diameter: 1.75mm
• Color: Yellow ; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Bracket of Nema 17 Stepper
• Color: Same as the picture, Packing Size: Suitable package, Type: NEMA 17
• For 3D Printer nema17

• Cable length: 1 meter
• One end is 6pin XH2.54 white terminal and other side is bare wire (no connector)
• Suitable for Nema 17 motor having 6 pin connector
• NOTE: Wire colour can be different as shown in picture. Wire will be supplied as per stock availability. if you have specific colour requirement please confirm with us before placing order.
• On other side of wire there is no connector so need to be soldered as per customer requirement.

• Material: brass
• Nozzle ID: 0.4mm

• Network Ready

• Model: A4988
• Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step & 1/16-step
• Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockou
• Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motors rated voltage to achieve higher step rates
• Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)

• Material: Plastic
• Color: White
• Package Contents: 100 Piece LF Thick RFID Smart Cards

• Model: PHS12-R
• Threads Size: Metric M12
• Threads Pitch: 1.75mm
• Threads Direction: Right Hand Side
• Bearing Inner Diameter: 12mm

• Package includes: 5 pcs brass extruder driver gear and a 1.5mm wrench for the set screws.
• Material: the 3D printer extruder drive gears are made of premium brass, strong and sturdy, good bearing capacity, easy to use, improving your 3D printer working efficiency.
• Size: extruder gear Out Diameter 11mm/0.43inch, Height 11mm/0.43inch, inner diameter 5mm/0.2inch, 40 teeth, Weight 2g. Please confirm whether the product size meets your needs before purchasing.
• Compatibility: the drive gear fit for Creality 3D Printers Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, Ender 5 Pro, Ender 5 Plus, CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10 Plus, and MK7/MK8 extruder, other most 3D printers.
• Aokin 3D printer extruder gear use high-quality raw materials and fine workmanship, if you have any question about our product, please feel free to contact us, we will do our best for you.

• Material: PLA
• The filament is for 3D printing pen used to melt plastic at a high temperature
• Length:10 meter each; Diameter: 1.75mm
• Colour: Pink, Green, White, Orange, Blue; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's colour may be slightly different from the pictures. Please allow 1-5mm deviation due to manual measurement.

• v6 heatbrek, v6 throat, 3d printer
• Compatible with e3d v6 3.0mm hot-end
• Material : Stainless steel
• Size : About 2.2 x 0.2 x 0.2cm
• No teflon tube inside; all metal

• Material: Plastic
• Color: White
• Package Contents: 50 Piece LF Thick RFID Smart Cards

• More Safe to Use Tresbro 3D printer uv resin curing light with the UL certified waterproof power supply is more safety and reliable than other cheap uv resin light. The high brightness chip and led beads can reduce light decay efficiently, and the aluminum casings makes sure no rusty and longlife use.
• Energy-saving and Environmental Friendly Our 20W uv resin curing light uses 20 high-power 405nm UV Led beads to cure your uv resin prints quckily. This 20W uv light has 200W output effect, the power sonsumption is only one-tenth of the traditional UV lamp. It has no contains mercury. Efficient, energy saving and very environmentally friendly.
• 360 degreeRotating Solar Power Turntable Included Tresbro UV resin curing light comes with a 360 degree solar turntable. With this turntable, you will never need to worry the uneven curing of your beloved prints. What's more, the solar turntable can be used with batteries or the UV light, which is very convenient.
• Fast Curing Within 5 cm to the light, the resin can be cure within 10-15 seconds, but thicker parts need more time. This uv resin curing lamp will greatly reduce your time in curing.
• Friendly Reminder The uv light for resin can be use to DIY curing enclosue or use in handheld way. Due to strong UV light output, please use eye protection when using this light.

• Smooth and shiny like real silk, no extra polishing required, high detail printing results in a beautiful finish. SUNLU high quality silk PLA filament offers art and crafts and 3D projects a silky smooth surface that definitely gives an amazing result!
• These durable PLA SILK filaments are strict tolerances. Diameter 1.75 mm, dimensional accuracy + / - 0.02 mm without any exaggeration; 1 kg coil (2.2 lb)
• Complete drying for 24 hours before packing and vacuum sealed with desiccants in nylon bag. Recommended extrusion temperature / filament nozzle of PLA 210-220 degreeC, bed 60-70 degreeC.
• Works and harmonizes perfectly with all standard 1.75mm FDM 3D printers due to the high quality standards in terms of manufacturing accuracy and the small diameter tolerance of +/- 0.02mm.
• One month free trial, refund within 30 days if you are not satisfied. Coil Diameter: 8\" - Coil Width: 2.5\" - Coil Hub Bore Diameter: 2.20\"