Industrial & Scientific Store - Additive Manufacturing Products

• [Super Durable Tungsten Material] MK8 extruder nozzles are made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing?more heat-resistant than ordinary brass nozzle?MK nozzles is harder than brass nozzles?which makes it durable accurate and compatible with more filaments.
• [High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK.
• [High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs.
• [Applicability and Compatibility] The nozzles can work on Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 S1, Ender 3 S1 Plus, Ender 3 S1 Pro and CR 10 Series. Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
• [Package] Package comes with 5 pieces of black different size MK8 nozzles, the size is 0.2mm/0.3mm/0.4mm/0.5mm/0.6mm, sufficient quantity and size to facilitate your timely replacement, achieving quality printing.

• Material - Spring Steel
• Internal Circlip for Bore ID 50mm

• Three Nos. Of Sensors
• No Corrosion Sensor
• Compatible With All Water Level Controllers Models
• 1.5 Meter Wire Attached
• Easy To Fit And Use
• Long Length Of Wire Of 1.5meter Is Suitable For Tanks Upto 2000 Litres

• Timing Belt : GT2
• Width: 6mm
• Length: 1 mtr
• Pitch: 2mm
• Package Include 1x 1mtr of GT2 Belt 6mm Width

• Packaging upgrade: In order to more reflect the sense of design, have optimized and upgraded the appearance of the product. The outer packaging of the product purchased may be blue. promise that the quality of the products be the same as before, but with Upgraded packaging.
• Safe and long-lasting: these 3D printer glue sticks are made of quality PVP material, non-toxic and acid-free, will not hurt people's body, they come with high viscosity formula and have nice adhesion to hot plate or hot bed, easy to remove the printing models, suitable for the first layer before printing; 1 piece of glue stick can last for more than 100 average prints, practical to help 3D print parts adhere to the build plate during printing
• Easy to use and clean: these PVP solid glue sticks can be easily applied with flat or straight objects, such as ruler, ID card, glass plate and so on, just lightly apply glue to the area of the printing bed being applied, only in the effective printing area, no need to cover the entire surface; The 3D printer build plate is easily cleaned with water after cooling down
• Compatibility: these 3D printer glue sticks are compatible with all 3D printer heated bed, including build surface sheet plate, aluminum and glass plate and so on, bring a nice using experience. suitable for project crafts, school projects, art crafts and so on, it is recommended that put the lid on after each use to prevent glue drying out
• Package contents: you will receive sufficient quantity of 3D printer glue sticks, can satisfy your daily needs, easy to carry and store, ensuring you a long-term use; Each glue stick measures approx. 98 x 24 mm/ 3.8 x 0.94 inches, lightweight and portable

• Voltage: 12V, Power: 50W, Head diameter: 6mm, Head length: 20mm, Total length:2 Meter
• From the original ordinary 0.3-line high-temperature line to 0.6-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
• From the original 40W power up to 50W, therefore, the maximum temperature increases from 300-310 to 340-350 or so.
• The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
• Nice for 3D Printer, such as CR-10S Pro, CR-X, Ender 3, Ender 3X. Package includes 1 pc Ceramic Cartridge Heater Wire

• EFFICIENT AND STABLE: LCD 3D printer resin has high fluidity and fast curing. After curing, it shows good stability in humid and corrosive environment
• MULTI-COLOR: This 405nm 3D resin contains high-quality pigments, which makes the printed works show bright and amazing color effects
• HIGH PRECISION: Photosensitive resin has low shrinkage and high precision, 3D resin shrinkage rate of 3.72-4.24%, to ensure the high precision and smooth surface of the model, and perfectly restore the 3D printing works
• STORAGE METHOD: ANYCUBIC Resin recommended to store at 15-35. The lower the temperature, the higher the resin viscosity. Keep sealed to avoid moisture
• APPLICATION: UV Resin Suitable for most LCD 3D Printing. Suitable for DIY, jewelry design, classroom teaching and garage kit production, save the cost of your hobby

• Flexible: 1pcs RAMPS 1.4 Controller Board+ 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink on your Aduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.
• RAMPS 1.4 expansion board as a driver expansion board, can be used for engraving machines, 3D printers and it is a total of five slots, can drive five A4988 stepper motor.
• Update High Quality Ramp Board by changing MOSFET: old MOSFET IC Model : PDF55N06 * Specification?VDSS:60V ID:55A New MOSFET IC model: HM60N06 Specification?VDSS:60V ID:60A HM60N06 current up to 60A?More safety Each road stepper motors only need two IO ports.
• Stepper motor wiring as follows: 2A, 2B is a group (red, green), 1A, 1B is a group (blue, yellow), if want to change direction, can be change the position of one group , for example 2A, 2B mutually exchanged.
• Using This suite (1pcs RAMPS 1.4 Controller Board+ 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink on your Aduino-compatible MEGA shield for easy service,part replacement,upgrade-ability and expansion.

• Weight - 800 gram
• Premium quality flexible Filament

• Mini size,easy to carry.Four-size ports design,very practical.
• Suitable for M2,M2.5,M3,M4 screw nut.
• Made of high-quality materials,it is durable,comfortable to wear and has a long service life.
• It is one of the must-have tools in the kit.

• Upgraded eBOX Lite Dryer Box Moisture can cause printing failure, our eBOX Lite dry box is designed to keep filament in constant temperature and humidity, especially for those hygroscopic filaments. It can remove the excess moisture, keep the filament dry.
• Efficient Heating & Even Temperature Upgraded Built-in PI heating Arc Sturcture and insulation cotton surrouding structure, eBOX Lite filament dryer box can heating fialment evenly and temperature inside the box can effectively reach 50-55 in just 2 hours. Besides, it can maintain constant temperature and humidity all the time.
• Low Noise & Storaging This storage dry box has applied upgraded long-life low-noise turbo fan, which can provide a quiet working environment even at night. Also it can provide a dry storage environment for filament.
• High Compatibility Maximum capacity of the Dry box is 200*73mm, it works perfectly with 1.75mm/2.85mm/3.00mm diameters filament in 0.5kg/0.75kg/1kg. Transparent lid design is easy to check the filament without open the lid.
• Easy to Use This dry box is very easy to use and have a inside temperature range between 40 -55. It is temperature setting mode when press mode button setting from 1-3 by up/down button and mode button again for setting heating time from 0-24h.

• Precise Leveling - Metal nut is more powerful and will twist more tightly than plastic nuts. Upgraded leveling nut of large size makes leveling easier, The torque of these nuts is large, making it easier to fine tune the hotbed.
• Easy to Install and Level - It doesn't occupy the printing volume due to reasonable design with easy installation
• Upgraded Bed-level Springs - These level springs more stiff and accurate bed leveling. The die springs are stiffer than ordinary spring, which help your 3D printer much more stable while printing.
• Compatible with Most Hot Bed - Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are original upgraded replacement parts for Ender 3/3 Pro/3 X, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro, CR-10 Plus, CR-X, CR 20.
• Official High Quality - Made by high-quality aluminium alloy, last much longer your stock plastic nuts. Package includes: 4x Hand Twist Leveling Nut, 4x Hot Bed Spring

• Fast assembly: Modulated structure allows it to be installed within 10 minutes. Simple and convenient.
• Open-sourced control board provides limitless possibilities to adjust your printers and modify firmware on your will.
• Breaking-resuming Function can continue to print from the same place where it stops, regardless of unexpected power failure, stopping to change the filament, stopping and print it tomorrow.
• High adhesion building platform allows you take down your printing works easier, do not need mask tape and glue stick any more.
• Quieter and more stable printing movement: The V-shaped wheels and V-slot rails on each axis make the printing quieter, more stable, and more wear-resistant.

• Cable length: 1 meter
• 6pin XH2.54 Female to 4 Pin Dupont Female cable
• One end is 4pin DuPont connector head, another end is 6pin XH2.54 white terminal
• Suitable for NEMA 17 Motor
• NOTE: Wire colour can be different as shown in picture. Wire will be supplied as per stock availability. if you have specific colour requirement please confirm with us before placing order.

• Glow in the dark -- This glow pla contains phosphorescent materials that glows in the dark after absorbing light energy.Exposure to the strong sunlight or UV light will get an amazing glow effect, but too long exposure time may damage the glow filament
• Clog-Free & Bubble-Free -- Designed and manufactured with clog-free patent to guarantee a smooth and stable printing experience with these PLA refills. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re-sealable bag
• Less -tangle and Easy to Use -- Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother
• Dimensional Accuracy & Consistency advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm; 1 kg spool (2.2lbs)
• Cost-effective and Wide Compatibility -- With over 8 years 3D filaments R & D experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Ender 3, Monoprice FlashForge and more

• Flexible: 1pcs RAMPS 1.4 Controller Board+ 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink on your Aduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion.
• RAMPS 1.4 expansion board as a driver expansion board, can be used for engraving machines, 3D printers and it is a total of five slots, can drive five A4988 stepper motor.
• Update High Quality Ramp Board by changing MOSFET: old MOSFET IC Model : PDF55N06 * Specification?VDSS:60V ID:55A New MOSFET IC model: HM60N06 Specification?VDSS:60V ID:60A HM60N06 current up to 60A?More safety Each road stepper motors only need two IO ports.
• Stepper motor wiring as follows: 2A, 2B is a group (red, green), 1A, 1B is a group (blue, yellow), if want to change direction, can be change the position of one group , for example 2A, 2B mutually exchanged.
• Using This suite (1pcs RAMPS 1.4 Controller Board+ 5pcs A4988 Stepstick Stepper Motor Driver Module with Heat Sink on your Aduino-compatible MEGA shield for easy service,part replacement,upgrade-ability and expansion.