Industrial & Scientific Store - Additive Manufacturing Products

• Nozzle diameter:0.4mm, Throat/Heatbreak inside PTFE Tube
• For filament types:1.75mm PLA/ABS
• Extrusion head voltage 12V, Power 40W
• Thermistor: 100K; NTC B value: about 3950
• Melt High-temperature materials - up to 260 C degree with integrated thermistor 100K.

• Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.2 mm, out thread M6, Thread length 4mm; a set of 10pcs printer nozzles and 3 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.
• Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
• Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs. Due to all of above, not only reduce the resistance, avoid blocking of the filament on the rounded chamfer, but also provide a long service life, make out of filament more smoother.
• Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it can prevent printhead from leakage effectively and avoid nozzles clogging.
• Each of our kit only comes in a single size, so you can feel free mix and match!

• NOTE - The length of springs are about 25mm, which is slightly longer than the ender 3 series printers(Including ender 3/ender 3 pro/ender 3 v2). The springs need to cut them shorter than the original ones in order to adapt them to the printer or adjust the hot bed to be higher to fit the springs.
• Suitable for - Upgraded aluminum hand twist level nut are original upgraded replacement part for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR 10S Pro V2, CR-10 Plus, CR-X, CR 20.
• Metal Material - Metal material is stronger, it will twist more tightly than plastic nuts.
• Easy to use - The torque of these nuts is large, making it easier to fine tune the hot bed.
• Quality - Made by high quality aluminum, last much longer your stock plastic nuts.

• ?With High Heat Tolerance?Carbon Fiber has a very high strength to weight ratio, and is extremely rigid?20% Carbon Fiber Strands, Which a Suitable Percentage For Most Of The Printers
• ?Better Dimensional Stability? SUNLU Carbon fiber PLA filament has better dimensional stability for warp free printing, excellent layer adhesion, and easy support removal?Printed Objects Have A Smooth Look and Feel
• ?High Compatibility?SUNLU Carbon Fibre Filament is compatible with all types of FDM 3D printers?This means you can print without any hassle.
• ?Consistent Feeding and Perfect Print?Dimensional accuracy,Diameter variance of no more than 20 microns for consistent feeding and better 3D prints.Nozzle temp 210-240 degrees recommended?Bed temp. 60-80 degrees recommended

• NON STICK : Non-stick cookware is a common application, where the non-stick coating allows food to brown without sticking to the pan. Non-stick is often used to refer to surfaces coated with polytetrafluoroethylene (PTFE), a well-known brand of which is Teflon.
• FOOD GRADE : Teflon PTFE is FDA Food Grade compliant. PTFE resins have an upper service temperature of 500? F (260 C) and is one of the most widely used fluoroplastic material.
• HEAT RESISTANT : Teflon (PTFE) Teflon is most widely known for its non-stick properties as it has one of the lowest coefficients of friction against any solid known to man. But it also has a large operating temperature range, with enough thermal stability to be used between -328?F and +500?F without degrading.
• CHEMICAL RESISTANT : Polytetrafluoroethylene (PTFE) is a durable and flexible elastomer of average tensile strength but remarkable chemical resistance, as well as excellent thermally and electrically resistive properties. At a molecular level, PTFE consists of a chain of carbon atoms with two fluorine atoms bonded to each carbon.
• NON FLAMMABLE : Polytetrafluoroethylene (PTFE) is a totally fluorinated polymer which is white, semi-opaque, and semi-crystalline. It has excellent chemical resistance, is unaffected by nearly all chemicals, and has a very high oxygen index (i.e. is inherently non-flammable).

• Alter the vibration characteristics of rotating units
• Connect driving and the driven part and also Introduce protection against overloads
• Provide for the misalignment of the shafts. To introduce mechanical flexibility
• Reduce the transmission of shock loads from one shaft to another

• Print temperature: 230 degreeC 250 degreeC
• Print bed temperature: 80 degreeC 100 degreeC
• When 3D printer filaments like PLA, PETG are reinforced with carbon fiber, the result is an extremely stiff and rigid material with relatively little weight

• Inner Diameter: 9mm
• Spiral Wrap for Wire Management
• It is very useful for wire management as all wires look very tidy with this wrapped over bunch of wires
• Package Include 1 x 9mm 3mtr long spiral wrap

• Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
• Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
• Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
• Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
• Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).
• Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.

• The tube fitting comes in a wide variety of tube and thread sizes.
• Even after installation, the direction of the tubing can be changed freely.
• This fitting has a 4.3mm output hole, so the tubing can be fixed into the connector.
• The Pneumatic Coupler Air Connectors PC4 4MM Straight Fitting For PTFE Bowden Tube 3D Printer is designed for polyurethane or nylon tubing. Made of nickel-plated brass for corrosion resistance.
• Oval release ring assists to connect the hose easily by manual, without special tools required.?Outside (and inside available) hexagon wrench.

• Latest CNC Shield Version 3.0 for Arduino.
• GRBL 0.9 compatible (Open source firmware that runs on for Arduino that turns G-code commands into stepper signals).
• 4-Axis support (X, Y, Z , A- Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13).
• Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping).
• A4988 Stepper Motor Driver Board is a breakout board for Allegro's A4988 DMOS Micro stepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefully before using this product.

• Fold through slots have been added to allow the timing belt to be easily folded back onto its self and clamped in place.

• Super Neat Filament Spool SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use.
• ?SUNLU Shiny Silk PLA SUNLU 3D printing silk PLA filament 1.75mm has good layer adhesion, very easy to use, friendly to beginners, no clog, no bubble, no tangle.
• ?Shiny Silky Surface PLA Silk filament has a very shiny smooth surface, the reflective effect is good, and the color is bright, which is very suitable for 3D printing art.
• ?1.75mm Filament Diameter Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers.
• ?Recommend Settings We recommend printing the Silk PLA filament at nozzle temperature of 200-230 degreeC, bed temperature of 60-80 degreeC, and printing speed of 30-60mm/s.
• ?SUNLU Main Products FDM 3D Printer, 3D Printer Accessories, 3D Printer Filament, Filament Dryer, 3D Pen, 3D Printer Resin, LCD 3D Printer, Resin Curing Box.

• Original Aluminum Drive Feed for Creality 3D CR-7, CR-8, CR-10, CR-10 S4, CR-10 S5, it is stable and durable
• MK8 extruder drive feed kit, can replace acrylic parts of CR-10, CR-10 S4, CR-10 S5.
• Full Metal Aluminum Alloy
• Used for 1.75mm filament
• DIY Aluminum Block Left Hand Side , need to assembly by yourself

• Product name: Long type linear bearing slide units
• Type: Double length open type SCS8LUU
• Inner bore (inner dia.): 8mm/0.31''
• Overall Size: 58 x 34 x 22mm/1.02\" X 1.34\" X 0.87''
• Material: metal, rubber; Package:1pc pillow block bearing