Industrial & Scientific Store - Additive Manufacturing Products

• [60A Shore Hardness] SuperElastic has 60A Shore durometer and 150% elongation at break well-suited for 3D printing human skins, faces, buttons, hairs.
• [Balanced Softness with Resilience] SuperElastic has balanced softness with resilience to simulate two component silicone prototypes.
• [Fast Printing] Printing 50um layer in 1.3 sec with monochrome LCD 3D printers, saving on time and electricity bill.
• [Enhance Productivity] Super fast printing enhance the productivity of 3D printing farm by at least 40% and up.
• [ISO 10993-5] Properly cleaned and fully post cured SuperElastic prints pass ISO 10993-5 test.

• Fast Printing and Curing
• Low Odor and Easy to Clean
• Superb Resolution & Surface Finish
• Versatile Application & Wide Compatibility
• 2kg Siraya Tech Fast White Precision 3D Printing with Low Shrinkage

• This CNC kit included
• 1 x Nema 23 Bipolar 3Nm (425oz.in) 4.2A 57x57x114mm 4 Wires CNC Stepper Motor
• 1x Digital Stepper Driver 1.8~5.6A 20-50VDC for Nema 23, 24, 34 Stepper Motor

• 7 new features on a Bondtech eXtruder: Larger drive wheels, for increased filament grip; Filament pre-tension lever, for repeated results; Multi-function interface socket, for tool or application quick swap; Drive wheels maintenance windows, for easy cleaning; Compact, light & symmetric design, for increased performance and compatibility; Multiple mounting hole patterns, for easy and flexible setup; A small step for a greener Future, craft boxes without bleaching & no coating.
• The housing parts are professionally printed with nylon for maximum strength and precision and higher temperature resistance.
• Use the supplied studs to replace the 4 screws of the stepper motor and use them as additional mounting points.

• Surface technology: Oxidation prevention by electroplating (chromium plating)
• Rail Length: 700mm (27.55\"). Rail Guide Material: bearing steel
• Block: MGN12H ball bearing carriage. Block material: Stainless Steel. Blocks are pre-loaded
• Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile
• There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out

• The Hotend is designed and manufactured by our partner (PHAETUS). The quality is very high. The printing temperature for this hotend can reach up to 500 degree if your heater and temperature sensor allows, heater tube and temperature sensor are not included here, please know before ordering.This is a drop in All Metal Conversion kit for E3D V6 Hotend printers. It requires absolute zero modification of the printer to install.
• The hotend heater block is mainly composed of copper alloy material which has the advantage of faster heating and better heat dissipation. All Metal , with overall high temperature resistance up to 500C.
• eatbreak inner hole roughness is Ra 0.3 Smoother flow of filament. Conical fitting of heatbreak and Aluminum heat sink makes a better heat dissipation
• sing plated copper nozzle 0.4mm for 1.75mm filament, Compatible with all filaments, including PLA, ABS, PETG, TPU, PP, PC Nylon, PEEK, PEI and composite materials containting abrasive additives, such as carbon fiber, steel , wood, boron carbide, tungsten and phosphorescent pigment.
• Package: 1set hotend, NO HEATER TUBE AND THERMISTORS, PLEASE KNOW

• JAYO High Speed PLA Filament 1.75mm, Fast Printing with High Flow PLA 3D Printer Filament, Neatly Wound, Dimensional Accuracy +/- 0.02mm, 1.1KG Spool, 2 Pack, Black+White

• Complete Package - Upgrade your post-processing with the ELEGOO Mercury Plus 2.0, which comes with a washing container and basket for convenience.
• Dual-Purpose Machine - Save time and energy with the Wash + Cure feature that efficiently processes your 3D prints to meet your varied needs.
• Maximized Capacity - Wash and cure more models at once using the build plate or washing basket, which accommodates larger or multiple models.
• Advanced Curing - Benefit from the 16pcs 405nm Multiple UV lamp beads, ensuring quick and even curing, and enjoy the ease of a rotating 360 turntable.
• Improved User Experience - Enjoy the convenience of reduced alcohol volatilization, quieter operation, and high compatibility with most LCD/DLP/SLA 3D printers.

• Filament Drying

• 5X High-Speed More than 65% shorter time when printing the same model. The Maximum Print Speed is 250mm/s. Recommended print speed is 150mm/s ensures a perfect blend of precision and performance, empowering you to bring your ideas to life with unparalleled speed and accuracy.
• New Integrated Extruder The newly upgraded extrusion system and cooling system melt filaments quickly through the 60W hot end. At the same time, it is equipped with a 7000 rpm cooling fan to ensure rapid cooling and molding of the model.
• Details Even Better Apply the linear propulsion and input shaping functions in Marlin firmware to reduce spillage and print resonance, improve print quality and stability, and create smoother and clearer model details. Novices can also produce high-quality works for their first print.
• LeviQ 2.0 Automatic Leveling With the design of a unique module, the Z-axis offset is intelligently compensated after automatic leveling, and the Z-axis compensation value is supported to meet the needs of different users and usage scenarios, so as to start creation efficiently and easily, and also for novices.
• More Function, A, Fast Assembly, integrated structure and modular design. B, 4.3 inch large-size touch screen, easy to operate. C, Double-gear extrusion system, is able to reduce the chances of filament tangle and compatible with PLA and flexible filaments. D, Resume print and Material breakage detection. E, Safe power supply.

• Package dimensions: 6.89 \" L x 4.78 \" W x 2.35 \" H
• Product type: Auto Part
• package quantity: 1
• Country of Origin: China

• High Speed Printing: JAMG HE High Speed PLA + are manufactured for High speed 3d printers and printing speed can reach 500mm/s, it can work with normal printer also.
• Good Fluidity and High Melthing: Printing temperature range is 190 degree C-240 degree C, making it easy to print on most printers without clogging the nozzle,melt Flow index 10.68g/10min(190 degree C,2.16kg)
• Tangle-free?filament was rolled up in the spool by coded machine equipment,neat and easy to use,high sucessful rate.
• No Warping,Good layer adhesion, recommend Print Temp:190-240 degree C, Bed temp: 45-60 degree C.
• Wide Compatibility: Compatible with most high speed 3d printer such as: Bambulab X1/X1C/P1P/P1S, Creality K1/K1 MAX,FLSUN V4,ELEGOO Neptune4,also with regular 3d printer.

• Premium PETG Filament: Explore the world of 3D printing with our superior quality PETG filament 1.75mm combining the ease of printing of PLA with some of the durability of ABS - the ideal choice for precision and reliability.
• Exceptional Printability: TEQStone filament PETG ensures hassle-free 3D printing, boasting minimal warping and superb layer adhesion for consistent, professional results.
• Durable and Impact-Resistant: Create robust prototypes, mechanical parts or outdoor components with confidence using our PETG filament 1.75, known for its durability and impact resistance to moisture and UV exposure.
• Versatile Applications: Unleash your creativity with TEQStone PETG filament 1.75, suitable for a wide array of projects, from functional prototypes to artistic masterpieces.
• Quality Assurance: Our PETG undergoes rigorous quality control to guarantee ?0.02mm precision and highly-consistent colors, ensuring a smooth and reliable 3D printing experience every time.

• High Torque: Twotrees stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance reactance, responsive and can avoid system error.Low loss stators have better high speed performance.
• Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.
• Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.
• Excellent Service : CE certified?Each nema 17 stepper motor has undergone a rigorous quality control ex works, can carry out a 24-month quality assurance . If need further please feel free contact us, we very happy to assist you.
• What Do You Get: The package includes 1* 38mm Stepper Motor/1pcs 1m 4pins cable and connector (Size: 42mm X 42mm X 38mm/1.65''x1.65''x1.49'' ,NEMA 17 bipolar 4-wire:Black: A+, Green: A-, Red: B+, Blue: B-