Industrial & Scientific Store - Additive Manufacturing Products

• Adopt ARM Cortex-M0+series STM32G0B1RE master chip with 32-bit main frequency of 64MHz
• The maximum power supply of the motor is 56V, and for the larger voltage when using EZ5160, the isolation chip is used to protect the main controller from burning IO
• The SPI expansion interface is reserved on the main control board for external acceleration sensor of customers using Klipper firmware for acceleration compensation
• The power chip adopts TPS5450-5A and supports DC12/24V power input. The output current of the chip is up to 5A and the peak value is up to 6A, which perfectly supports raspberry pie power supply
• The BIGTREETECH Manta E3 EZ main control board and the core board use the BTB connection mode, making it possible to select other core board solutions other than CM4, such as BIGTREETECH CB1

• Nema 17 Stepper Motor, Holding Torque 0.42 Nm, 5 Pack
• Stepper motor 1.5 A rated current, resistance 2.3 ohms
• Bipolar stepper motor 42 x 42 x 38 mm, weight 0.28 kg, shaft diameter 5 mm
• 3D Printer Motor with 1.8 Degree, 4-Conductor UL1007AWG6, Connector M20-1060400
• ***Connection Br: A+: Black, A-: Blue, B+: Green, B-: Red**

• Package include: iMetrx Nema 17 Stepper Motor 42-38 with 1Meter Wiring x5pcs
• iMetrx Nema 17 Stepper Motor 17HS4401 has high torgue and stronger power (20-25% higher than normal motors) and a lower resistance value to reduce heating.
• iMetrx 3D printer motor 42-38 has a stable internal structure which enabled the stepper motor to provide low noise.
• 17HS4401 DC 1.5A-3.6V, 2 Phase, 4 Wires, 1.8?0.09 Deg., 380mN.m., compatible with all FDM 3D printer that need Nema 17 Stepper Motor 42-38.
• iMetrx stepper motor have durable bearing for long time use.

• Fast Speed Filament Parameter--iSANMATE PLA Plus Filament Print Temperature: 190 - 220 degree C. Bed Temp.: 35 degree C-60 degree C; Printing Speed: 30-600mm/s, iSANMATE PLA+ filament dimensional: 1.75mm, accuracy +/- 0.03mm;
• Strong Fluidity &High Speed: The iSANMATE high-speed filament has strong fluidity and the printing speed can reach 600 mm/s, which reduces the printing time without affecting the model printing effect.
• iSANMATE Material: --PLA + high-speed filament has superb layer bonding, and Impact resistance and toughness are greater than conventional PLA filament, Our filament is carefully vacuum packed with desiccant to maintain the performance of PLA filament and prevent dust and foreign matter from entering.
• Fit For Printer Model -- iSANMATE high-speed filament is fit for high-speed Speed Printer: K1?K1 Max?Ender-5 S1, Ankermake M5, M5C, Bambux 1, P1P, P1S and other high-speed 3d printer, Our filaments can also support both high-speed and normal-speed printing and Works perfectly with all common 1.75mm FDM 3D printers.
• Technical Solutions: Provide fast and efficient technical solutions when you have any printing problems With 24 hours guaranteed reply;

• Fast 3D printing 2-3 times faster than other resins on most popular SLA 3D printers
• For high precision dioramas & miniatures brings to life even slightest expressions of your 3D models
• Hard and stiff 3D prints for detailing and accuracy printing, captures even the finest features like hair and wrinkles
• Low odor & low skin irritation perfect for beginners to start 3D printing at home
• Low shrinkage and good stability in moist and corrosive environments

• Toughness Enhanced Ease of printing, high purity with low shrinkage and superb layer bonding.Novamaker PETG filaments will meet your demands for printing projects of functional parts with higher toughness.
• Clog-Free & Bubble-Free Novamaker dry petg 1.75mm filament for 48 hours before packaging and vacuum sealed in nylon rebag. No stringing and warping issues,easy to use.
• Tangle Less Advanced take-up device, PLC automatic precise wire arranging to make sure the line tidy and less-tangle and guarantee the petg filament 1.75 tidy and easy to be fed.
• Dimensional Consistency 1.75 mm petg, dimensional accuracy + / - 0.02 mm,giving you a great printing experience with no clog. 1 kg spool.
• All Lifetime Warranty Recommended extrusion/nozzle temperature 230 degree C - 250 degree C,net weight 1kg spool. Fast and effective 24 x 7 professional customer support providing technical solution of novamaker petg filament.

• JAMG HE PETG Filament: High gloss & high toughness. Excellent impact resistanc and chemical resistance. Good stability, no cracking, no warping. Environmentally friendly, non-toxic and low odour.
• PETG Filament: Made from PETG plastic, which is known for its ease of use (like PLA) and durable strength (like ABS), provides light bed adhesion, high strength and a glossy finish.
• 3D Printer Filament: Diameter 1.75 mm +-0.02 , Total length: 350?355 m. Designed for most popular 3D printers. (Check Spool Size for Compatibility).
• Extremely High Success Rate: Perfect roundness and very tight diameter tolerance ensures an even feed and stable prints. You will achieve a wonderful printing experience.
• Use Tips: Nozzle temp: 220-240 degree C (428-464?F). Base plate: 70-80 degree C (158 - 176?F). Compatible with All FDM 3D-printers and 3D-pen. Best Drying temperature: 65 degree C - 70 degree C (149?F - 158?F).

• 2Pcs per package, 20mm * 20mm * 59.06 inch / 1500mm length
• Made with 6063 Aluminum material. Adapting the latest anodizing technology, smooth surface and robust construction, long service time
• Aluminum profile extrusion products are a good linear motion material with high strength and adjustable. It can be fixed on the side of 4 grooves such as M3, M4, M5 T-slot nut and pulley
• Widely applied in 3D printer, CNC, DIY project, lasers engraving machine, automation equipment, workbenches, stands, furniture, fitness equipment, precision printers, automatic cutting machine
• Our factory has the most styles of Aluminum Extrusion Profiles, and we provide any length you want (within the transportation permission ), if you have needs, please give us Amazon Message

• Material This kit is an all metal construction including the L brackets, it's supposed to add rigidity to your printer
• Easy to Install Complete accessories and installation tools,this support rod is easy to install
• Function Reduces the vibration made by printing, supporting rod kit makes 3d printing more stable
• Widely Used Used for upgrading 3D Printer CR-10 300 and CR-10S 300,it holds the printer pretty solid so you can printer super tall prints and not worry about the frame moving
• Package Package included all the necessary parts for supporting rod set

• Input Range: 6v-30v
• Voltage Reading Range: 10.1v - 15.8v
• Accuracy: +/- 0.15v (due to the nature of a bar graph)
• 100% Analog circuitry allows for near instantaneous voltage accuracy versus a traditional digital voltage meter
• Response time from one end of range to the other is less than 200 milliseconds.

• Truly flexible (no fill or layer manipulation required to achieve performance)
• Item Package Dimension: 8.0\" L x 9.0\" W x 2.5\" H
• Item Package Weight: 1.25 lb
• Model Number: 3DNF06117505

• Q7 3D-C FIL PLA-F D1.75 WH 1KG 2P(AMZ)

• 1 x Digital Stepper Drive 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor
• 1 x Nema 23 Bipolar 1.8deg 1.9Nm (269oz.in) 3.0A 3.36V 57x57x76mm 4 Wires

• Made in the USA
• Superior Chemical Resistance vs. ABS
• Amorphous: Low and near isotropic shrinkage
• Low moisture absorption: 3X lower vs. ABS
• Very low odor emitted during printing

• Genunie Bondtech Parts
• For 1.75 mm size filament only
• Bondtech BMG utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears
• The thumbscrew tensioner allows the user to fine-tune the pressure exerted by the drive gears onto the filament
• This new extruder can be used in a Bowden or direct setups and gives you the flexibility to choose what works best for your application