Industrial & Scientific Store - Additive Manufacturing Products

• High Precision These tough PLA wires have strict tolerances. Diameter 1.75 mm, dimensional accuracy +/- 0.02 mm without exaggeration.
• Tangle free and without stop: Consistent diameter and roundness, less string formation and deformation, strong adhesion between the layers.
• Environmentally friendly: Made from starch raw materials from renewable plant resources.
• Wide compatibility: Works and harmonizes perfectly with all common 1.75mm FDM 3D printers thanks to the high quality standards of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
• Vacuum Pack 329mm 3D printer filament PLA in vacuum packaging; 1kg coil x 2.

• 2kg in Total, 0.25kg per Spool, 8 Rolls of 0.25kg 1.75mm PLA Filament 8 rolls of 250g SUNLU 1.75mm High Speed PLA filament. Color: Black+White+Green+Blue+Red+Orange+Yellow+Pink. The design of 250g PLA filament is convenient for customers with multiple color needs. Especially for multi-nozzle 3d printer users and 3d pen users.
• Small Spool Diameter - Spool Diameter: 140mm(5.5 inches), Spool Hub Hole Diameter: 53mm(2.08 inches), Spool Width: 36mm(1.4 inches). Please pay attention to the filament spool size! Please check if it is compatible with your 3D printer.
• Good printing effect, 100% Bubble-Free - New upgraded Universe series 3D printing filament High Speed PLA strictly guarantees neat lineup, no knotting, strictly guarantees ?0.02mm wire diameter difference, 100% zero bubbles. Ensure high efficiency printing, say goodbye to plugging.
• Good fluidity, Strong resistance - SUNLU 3D filament High Speed PLA is 1.5 times more fluid than ordinary PLA, About 1 times stronger than ordinary PLA and PLA+ in terms of impact resistance. The smoothness of the material discharge is excellent, reducing plugging, and the printed models are resistant to dropping.
• New hue, Good Glossiness - SUNLU upgraded 3D filament has a new hue to give you a new visual effect. PLA filament has good adhesion and super strong interlayer bonding, and the surface of the consumable has good glossiness, soft color and warm color, making 3D printed models more glossy.
• Wide compatibility, After-sales guarantee - High Speed PLA Filament is not only suitable for all models of FDM 3D printers, but also for SUNLU filament dryer box S1/ S1 Plus/ S2 full series. It is widely used, suitable for printing crafts, artwork and industrial design samples, etc. In addition, SUNLU has up to 1 year after-sales service and guarantees to reply emails within 24 hours, please feel free to contact us if you need.

• Dichromatic Coextruded Rainbow Silk PLA - 3D print high-resolution shiny bicolor parts: no jamming, less stringing, no warping, no odor, premium quality, and broad compatibility.
• Multi Color PLA Filament - Produced with dual extrusion, unlike rainbow filament, has two color along the whole spool. Similar to Magic-PLA, Quantum PLA, Gnvtntp filament, etc?
• 100% tangle-free and problem-free: Produced with laser diameter control and automatic winding system guarantees success even in the longest prints. Save time and money!
• Made in USA Raw Material - Only pure Natureworks Ingeo PLA is used to produce this filament for a smooth 3D printing experience. Coiled in a cardboard spool.
• Profesional-Grade Packed - The spools are dried and then vacuum packed in a resealable bag to preserve the filament between uses. All the products are hand-checked and come with a guarantee. If something goes wrong, just contact us.

• Package include: iMetrx Nema 17 Stepper Motor 42-48 3D Printer Motor x1pc
• iMetrx Nema 17 Stepper Motor has high torgue and stronger power (20-25% higher than normal motors) and a lower resistance value to reduce heating.
• iMetrx 3D printer motor 42-48 has a stable internal structure which enabled the stepper motor to provide low noise.
• DC 1.7A-3.7V, 2 Phase, 4 Wires, 1.8?0.09 Deg., 480mN.m, compatible with all FDM 3D printer that need Nema 17 Stepper Motor 42-48.
• iMetrx stepper motor have durable bearing for long time use.

• Less Brittle & More Strength - Compared to other types of 3D Printer Resin, SUNLU ABS-Like Photopolymer Resin has better toughness, Non-brittle and has excellent abrasion resistance. If you need to print miniature or tiny objects, SUNLU ABS-Like 3D Printer Resin is your first choice.
• Fast Curing and Low Odor - SUNLU 405nm rapid uv resin has excellent fluidity for fast curing. 3D models printed by SUNLU ABS-Like resin shows good stability in humid and corrosive environments after curing. In addition, SUNLU ABS-Like resin has a very light odor and does not cause any harm to humans.
• Low Shrinkage & High Precision - During the development process, engineers worked on ways to reduce volume shrinkage during the curing of the SUNLU ABS-Like Photopolymer Resin in order to improve the accuracy of the resin print results. Providing you with high precision, smooth surface print results.
• Multiple Colors & Wide Compatibility - The performance of SUNLU ABS-Like 3D resin has been optimized through numerous tests, resulting in a high level of compatibility. Suitable for a wide range of 4k 8k DLP/SLA/LCD 3d printers. Provide more colors for all type users' creativity.
• Leak-proof & Secure Packaging - SUNLU 405nm UV Curing Standard Photopolymer Rapid Resin has the safe package with leak-proof bottle design. Reduce the risk of cap breakage and 3d resin leakage. The bottle is surrounded by a tight-fitting air bag. No worries for leakage during transport.

• Original resin tank used for ELEGOO Saturn 2 3D printer, and the FEP film is pre-installed.
• Made of anodized aluminum and durable for long-term usage, you don't need to worry about changing your resin vat frequently.
• Easy to assemble and replace, provide the extra lid to keep away dust, UV light source, or direct sunlight.
• The metal vat with neat screws to fix it in place, feet on the bottom to keep the FEP film from making contact with your workbench.
• The perfect spare resin vat when you need to change resin color faster and have a better printing experience.
• Dimension: 292.8*172.4*33mm; Resin suitability: works with all types of resin.

• High-quality PLA filament: The recommended nozzle temperature is about 210-220 degree C. With quality and consistency in mind, stronger toughness with low shrinkage and better layer adhesion. Meet your needs for functional print projects. (Using tips: Please pass one end of the filament into the fixing hole to avoid being entangled after finishing your printing.)
• Dimensional Accuracy & Consistency: PLA filament. Self-adaptive control system in the manufacturing guarantee the 1.75 mm diameter, dimensional tolerance: +/- 0.02mm, 1 kg spool (2.2lbs) net weight.
• Clog-Free & No Bubble: PLA is vacuum sealed with desiccant to protect the filament from moisture to achieve high-precision printing.No clogging and bubble-free.
• Less-tangle and Easy to Use: Auto-mechanical winding to make sure the wire is neatly arranged.Recommended PLA filament extrusion/nozzle Temperature 210 degree C - 220 degree C.
• Wide Compatibility: Works and Compatibleperfectly with all common 1.75mm FDM 3D printers.

• Q7 3D-C FIL PLA+ F D1.75 2CA 1KG 2P(AMZ)

• High-quality PLA filament: The recommended nozzle temperature is about 210-220 degree C. With quality and consistency in mind, stronger toughness with low shrinkage and better layer adhesion. Meet your needs for functional print projects. (Using tips: Please pass one end of the filament into the fixing hole to avoid being entangled after finishing your printing.)
• Dimensional Accuracy & Consistency: PLA filament. Self-adaptive control system in the manufacturing guarantee the 1.75 mm diameter, dimensional tolerance: +/- 0.02mm, 1 kg spool (2.2lbs) net weight.
• Clog-Free & No Bubble: PLA is vacuum sealed with desiccant to protect the filament from moisture to achieve high-precision printing.No clogging and bubble-free.
• Less-tangle and Easy to Use: Auto-mechanical winding to make sure the wire is neatly arranged. Recommended PLA filament extrusion/nozzle Temperature 210 degree C - 220 degree C
• Wide Compatibility: Works and Compatibleperfectly with all common 1.75mm FDM 3D printers.

• Truly flexible (no fill or layer manipulation required to achieve performance)
• Item Package Dimension: 8.0\" L x 9.0\" W x 2.5\" H
• Item Package Weight: 1.25 lb
• Model Number: 3DNF01117505

• Planetary Reducer for NEMA23 (Flange=57mm) Stepper Motor.
• High torque Long life usage Durable Low noise
• Gearbox Type: Planetary, Material: Metal, Quantity: 1 piece, Flange: 57mm, for Nema 23 Motor
• It's a good solution in applications that need low rotation speeds and/or lots of huge torque
• Included:1pc x Planetary Gearbox 4pc x Screws

• 32-bit DSP technology Optically isolated differential input signals. Ultra-low noise and vibration.2-256 Microstep setting range. It can drive 4/6/8 two-phase stepper line.
• 2DM860 motor controller is a digital stepper motor controller, which adopts the latest 32-bit DSP control technology.
• Users can set a microstep within 25600 and a multi-range current value within the rated current.
• Built-in microstep technology greatly improves stability and reduces noise under low microstep.
• Integrating the automatic parameter adjustment function, the driver could adjust the optimal operating parameters automatically for different motors to maximize engine performance.

• Upgraded Version of Stainless Steel Gear: using bimetallic tube (copper alloy + GRADE5 titanium alloy), high temperature resistance, durability, high precision, and higher surface finish. The output gear modulus design was changed from 0.5 to 0.25, reducing the gear outer diameter, effectively solving the weak points of V1.0 gear jamming and unsmooth extrusion.
• All-in-one Design & High Precision: The short-range extruder integrates the hot end of the nozzle, extruder, stepping motor, cooling fan, etc., double-gear extrusion, fast extrusion of consumables, short-range extrusion, short thread, and accuracy High, the control of the feeding amount is more accurate than remote extrusion, the withdrawal is more accurate, and the printing quality is better.
• With a smoothness of Ra0.4 on the inner walls of the throat and nozzle, it prevents clogging. H2 V2S uses a silicone protector with a high quality titanium-copper alloy hose for better heat dissipation and high temperature resistance, with printing temperatures of up to 270 degree C. The hose is easy to disassemble, making it even easier to use. Convenient.
• Lightweight & Compact & Powerful: BIQU H2 V2S extruder weighs only 195 grams, which effectively overcomes the short-stroke print head's heavier shortcomings, and is especially suitable for dual-jet printers. Using dual drive gears with internal gear ratio of 7:1, it has excellent performance and greater torque, reaching 770mN.m.
• Wide Compatibility: BIQU H2 V2S extruder has wide compatibility and can be installed in common 3D printers on the market, such as: BIQU B1, Ender 3(V2), Ender 6, CR-10S Pro, CR-10 V2/V3, Mega X, X1 Genius, etc. At the same time, you can also DIY according to your personal needs and update the corresponding firmware to meet your DIY needs.

• APPLICATIONS: Automation equipment, professional 3D printers, workbenches, lasers, stands, furniture, etc. machinery, fitness equipment, precision printers, automatic cutting machines, etc.
• Great DIY ?4080 aluminum extrusion is a great framing material that offers endless architectural possibilities for your ideas, it allows for a variety of combinations and reuse, and is easy to assemble.
• 40 series aluminum extruded profile T-slot made of 6063-T5 material, smooth surface, strong structure and long service life. Compatible with all Series 40 fasteners and accessories.
• HIGH QUALITY: High-strength European standard aluminum profile, the surface is anodized, making the surface smoother and cleaner.
• 2PCS per package, 40mm * 80mm * 500mm.

• Yellowing-Resistant - Siraya Tech Craft Ultra Clear 3D Printer Resin is meticulously designed for projects demanding high clarity and non-yellowing prints. Its advanced formulation provides strong resistance to yellowing, ensuring your projects retain their crystal-clear aesthetics over time. For the best results, avoid over curing during post-processing and apply a clear coating.
• High Transparency - Prints produced with Craft high clear resin offer pleasing aesthetic clarity when cleaned, cured, and coated following our user instructions. The use of coating is essential to restore the transparency of the model, just as it is with any clear resin. Check out our detailed post-processing instructions in the 'Product guides and documents' on the details page for more helpful tips.
• Easy to Print - Craft Ultra Clear resin is easy to print, reducing volume shrinkage during the photocuring process and offering fast print speeds and high resolution. Its specially formulated resin pigments settle slower than others, making it an ideal choice for Monochrome LCD printers and 8K capable machines.
• Low Odor, High Quality - Craft High Clear resin produces a minimal odor during the 3D printing process, ensuring a more pleasant printing experience. Its clear texture and smooth surface provide an impeccable finish to each model printed.
• Smooth & Glossy Surface Finish - With its high transparency and high-resolution capabilities, Craft high clear 3d print resin delivers a smooth surface and glossy finish, enhancing the visual appeal of your models while reducing post-processing time.