Industrial & Scientific Store - Additive Manufacturing Products

• Glass Fiber PETG Filament - The 3D filament contains glass fiber, which is more heat resistant, stronger and more corrosion resistant than ordinary PETG material.
• Vacuumed Sealed Packaging - NVSMART filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
• NVSMART PETG 3D Filament Advantages - Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, dimensional accuracy + / - .02 mm; Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion.
• Recommend Settings - We recommend printing at a Nozzle/Extrusion temperature of 220 degree C - 240 degree C (428?F - 464?F) and Bed/Platform temperature of 70 degree C - 80 degree C (158?F - 176?F).
• Strong compatibility - NVSMART has advanced technology, which helps NVSMART filaments to be compatible with most common 3D printers (such as Bambu Lab, Bibo 2 touch, Ender 3, Ender 5, MK3, etc.).

• Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ?0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
• The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
• - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
• - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
• 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk

• 50-600mm/s High Speed Filament iSANGHU high-speed PETG filament adopts a high-speed formula, and its printing speed can be as high as 600mm/s. It prints smoothly, will not clog the nozzle, cools quickly, and the molding is fast and stable, suitable for ordinary printers and high-speed printers.
• Good Light Transmittance iSANGHU transparent PETG filament has good light transmittance and transparency, suitable for printing artworks, decorations, vases, lamps, lampshades, toys, gifts, etc. (Note: Transparency will be affected by the thickness of the model)
• High-Quality Materials iSANGHU PETG filament 1.75mm uses raw materials imported from Germany. It has high purity, strong fluidity, fast cooling, and excellent inter-layer adhesion/bed adhesion, providing you with high-quality printing effects.
• Recommended Printing Settings The recommended printing speed of this transparent filament is 50-600mm/s, the printing temperature: 220 degree C-260 degree C, the hot bed temperature: 60 degree C-80 degree C, Dimensional: 1.75mm, Accuracy +/- 0.02mm, Nozzle : 0.4mm.
• Vacuum Seal Packaging After drying for 24 hours, the 3D printer filament is vacuum sealed and packaged with desiccant to ensure that the PETG filament is free from moisture and dust.

• ABS Strong 3D Filament QIDI TECH ABS 3D filament is a type of strong and durable filament, ideal for printing durable items or functional parts that require higher heat resistance.

• High Speed Printing:ACF has a smaller release force,enabling higher printing speeds and finer prints with longer service life.
• Low Release Force:ACF release film has a smaller release force and lower deformation during printing,improving the performance of printing models.
• High Quality ACF Film?The ACF release film is made of high-quality conforming materials which is non-stick,corrosion resistant and high-temp resistant.
• Compatibility:This 10.1inch ACF film is compatible with Anycubic Photon Mono M5s,Photon Mono M5s Pro and Ele-goo Saturn 3 Ultra 3D Printers.
• Warm Reminding:Please lay the film replacement flat on the table with the yellow label facing up.Peel off the blue protector gently,keep the transparent ACF film flat, or it will be cracked and damaged.

• Lightweight

• Fits: Micro Swiss MK10 All Metal Hotend Kit ONLY (M7 Threads)
• A2 Hardened Tool Steel Plated with TwinClad XT
• WEAR RESISTANT
• Orifice size: .8mm
• Made in USA by Micro Swiss

• Capricorn's Silky Bright Rainbow UV Filament - 1.75mm 1 KG

• Recommended Printing Temp/Nozzle Temperature: 240-260 degree C(464-500?F)
• Base Plate Temperature: 80-110 degree C(176-230?F)
• Performance Advantages: PRILINE Polycarbonate filament is a strong thermoplastic material, it is a good electrical insulator while having heat-resistant properties, Polycarbonate has many uses in everyday applications

• Dual Spool Filament Dryer Box: Each Creality Space PI Plus is equipped with 4 filament holes and PTFE pipes, which can dry 2 rolls of 1KG filament at the same time, meeting the needs of users to dry a vide range of filaments and 2 3D printers at the same time, saving space and making the work area tidier.
• New PTC Fast Heater, 360 Hot Air Circulation: Different from the general PI heaters on the market, our unique PTC heater can heat up faster and are more energy-efficient. The dryer quickly heats with a built-in fan, circulating hot air 360 for uniform heating, effectively drying moisture filaments and improving your 3D printing results.
• One Key Set for Each Type of Filaments: Space Pi Plus has one-key temperature settings for 12 different type of 3D Printing filaments, including PLA, TPU, ABS, ASA, PETG, PC, PA, PET, PLA-CF, PETG-CF, PA-CF. We have set the corresponding drying temperature for each type of filaments in advance. You do not need to check or adjust it yourself. The drying box will start working appropriately immediately.
• 4 Touch Screen for Easy Operation: The Creality Space Pi Plus Filament Dryer Box comes with a 4 touch screen which can clearly and brightly display temperature and time, making it simple for you to track drying conditions. With the touch screen, you can easily adjust the temperaturefrom 45 to 70?, and set the drying time from 0 to 48 hours, make sure the filament is completely dry to print the results better.
• Parameter Power-off Memory: No need to readjust parameters every time you start up. After a power outage, the filament dryer can remember your previous filament and temperature settings, allowing for quick start drying.

• Nema 23 stepper motor, 3Nm holding torque
• 3D printer motor with 1.8 degree, 4-wire, 2 phase
• Bipolar stepper motor 57*57*100mm, weight 1.5kg
• Stage stepper motor 4A rated current, resistance 0.9Ohms
• Industrial stepper motor for cutting machine, marking machine cnc router motor

• Compatible Models: This Creality Ender 3 X-axis linear rail kit is highly compatible with Ender3, Ender 3 Pro, and Ender 3V2. It includes Sprite pro kit bracket, so it also fits for Ender 3, Ender 3 Pro and Ender3 V2 with Sprite extruder pro upgrade kit
• Streamlined upgrades: The linear guide rail kit exhibits exceptional wear resistance, smooth motion, low noise operation, even force distribution. No need for firmware modifications or rewiring, making it effortless to upgrade and allowing you to start printing quickly without any hassle
• Enhanced printing precision: Crafted from high-quality high carbon chromium steel, the implementation of a linear rail ensures optimal stiffness and outstanding stability, minimizing printing vibrations and significantly improving printing accuracy
• Increased printing speed: The ultra-smooth and low-friction linear motion system reduces energy consumption and mechanical wear, enabling the 3D printer to operate at higher speeds, thereby saving you valuable time
• Official Creality Store: We are the official Creality store and offer 24/7 customer service along with technical assistance. Please feel free to contact us directly using the \"ask a question\" feature for professional assistance

• A upgrade Replacement printing platform-Round JanusBPS 270mm/10.6inch, compatible with Flsn Super Racer model. This steel plate is Double-Side Coated, one side with Gold Powder, another with a Smooth PEI pre sticked, comes with a magnetic base.!!!Please re-measure your build plate before ordering, not rely on its printing size area.
• Flexible, removable, can stick very well. The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! High strength and heat resistance. Both sides can be used to print, just flip it over, more convenient. The pei sheet is pre-sticked by machine, no worry about the bubbles, please peel off the profective film on the pei surface before using.
• Double sides can be used and easy to install: simply stick the bottom sheet onto your heated bed, then place the steel platform on the top. When you auto-level and mesh auto level with Kliper software on your PEI sheet, if it's done on the textured side, it will create fluctuations with the auto-level system since it is textured. ONLY using auto-leveling on smooth side PEI, everything will work perfect.
• Most filaments, such as pla, petg, can print directly on to the pei surface without the need for additional adhesives, tapes or slurry. Kindly note printing ABS needs a thermal insulation environment.
• Easy to adhere to the printing surface, easy to remove the prints. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it. Just wipe down with isopropyl alcohol between prints for best results.