Industrial & Scientific Store - Additive Manufacturing Products

• Parameter : Spool Diameter: 7.87\" - Spool Width: 2.83\" - Spool Hub Hole Diameter: 2.20\".Weight:1 KG (approximately 2.20 lbs) Spool.
• High Purity& Strong Toughness RANKI PETG 3D Filament is a rigid, tough, high performance material offering excellent clarity,adhesion light transmission and high gloss. Excellent fluidity, feeding smoothly, stable output, no jamming.
• Wide Compatibility 1.75mm Diameter, High Diameter Tolerance, Universal Compatible with Diverse FDM 3D Printers in Market, (For example MK3, Ender 3, Monoprice ,CR 10, Mega, Chiron, FlashForge , etc.) Melt well and Feed Smoothly, and can be easily printed on most printing substrates, such as glass, Bluetape, crepe tape and Buildtak.
• Printing Tips Recommended Printing Temp/Nozzle Temperature: 230-260?C(446-500?F) - Base Plate Temperature: 50-100?C(122-212?F)\" PROPER TEMPERATURES VARY BY MACHINE AND PRINTING CONDITIONS, IF EXTRUDING PROBLEMS PLEASE TRY RAISING OR LOWERING TEMPERATURE AS THE FIRST STEP \"
• Satisfaction After-sale Service If you are not satisfied with your purchase for any reason, please feel free to reach out to our friendly customer support staff. We will respond within 24 hours and find a resolution to your satisfaction!

• Toughness Enhanced Ease of printing, high purity with low shrinkage and superb layer bonding.Novamaker PETG filaments will meet your demands for printing projects of functional parts with higher toughness.
• Clog-Free & Bubble-Free Novamaker dry petg 1.75mm filament for 48 hours before packaging and vacuum sealed in nylon rebag. No stringing and warping issues,easy to use.
• Tangle Less Advanced take-up device, PLC automatic precise wire arranging to make sure the line tidy and less-tangle and guarantee the petg filament 1.75 tidy and easy to be fed.
• Dimensional Consistency 1.75 mm petg, dimensional accuracy + / - 0.02 mm,giving you a great printing experience with no clog. 1 kg spool.
• All Lifetime Warranty Recommended Extrusion/Nozzle Temperature 230?C - 250?C,net weight 1kg spool. Fast and effective 24 x 7 professional customer support providing technical solution of novamaker petg gray filament.

• Less Odor, Less Warping Novamaker Blue ABS filament is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins.ABS is 3D printed at 220?C to 250?C , it is advisable to use a heated printing bed and an enclosed build space to control the cooling of this material and prevent warping.
• Strong and Durable ABS Filaments 3D printed parts made with ABS filament tend to be more flexible and less?brittle'than those made with PLA filament.In ABS filament can endure heat, pressure and stress like no other home 3D printer material,making it a great choice for?wear and tear? prints.
• High Temperature Resistance ABS filament is more durable than PLA because of its high resistance to heat. Thanks to a comparatively high glass transition temperature, it takes a lot more heat for ABS to reach that point than for PLA. That's what makes it better suited for objects that remain in the sun.
• Dimensional Accuracy & Consistency This 1.75mm diameter ABS filament has been made with strict production standards, so novamaker can assure that you that its size remains consistent all throughout.And solves the problem of printing interruption caused by the knotting of the filament.Remember to pass the 3d printer filament through the fixing hole after use to avoid tangling.
• Vacuum Packing Complete drying for 24 hours before packaging.Novamaker use vacuum-sealed packaging bag for packaging 3d printer filament to keep the humidity percentage at a minimum and controlled. To avoid clogging of the nozzles and bubbling.

• PLA Max Filaments are made of high-quality materials and special technique.
• Have higher strength and better toughness?excellent thermal stability.
• It is a new 3D Printing materials to replace PLA PRO(PLUS).
• Industrial & Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament
• CC3D is dedicated to customer satisfaction. Customers are always welcome to contact us for any questions and/or support needs.

• Excellent Toughness - Has a certain physical toughness and will not be hard,excellent surface finish

• Main Control Chip Features: This SKR Mini E3 V2.0 motherboard uses the STM32F103RCT6 main control chip, and its flash memory size is 256K
• CNC Fan: Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0 version of the fan is not ready to use after power on)
• Hot-bed Mosfet: The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation
• Upgrade Features: Support BLtouch, filament detection, power-off resume, automatic shutdown, etc.; Increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink
• After-sales Support: If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems

• A must-have spare parts Removable build surface: made of spring steel and smooth pei, coated pei, print bed surface, double printing side can meet your different filament need. The Smooth Side pre-applied a pei sheet leaves a glossy, reflective finish. The Textured-powder Side leaves a textured matte finish. Give you two different experience just by flipping it over.!!
• Easy to remove model: fit for most filament, like ABS TPU PLA PETG etc printing material. It is easy to move after bed cooling, no need adhesive or glue stick.
• Comes with magneticc sticker, Simply stick the soft sticker sheet onto your heated bed and place the flexible PEI build plate platform on it. The sticker bottom holds the flexible build plate very tightly. Once you have finished printing, remove the spring steel plate, flex the print off, and snap the pei plate back onto the sticker sheet. Prints are removed easily without any scratches or damage.
• The removable flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them slightly! Easy to adhere to the printing surface with strength when heated, easy to releases them effortlessly when cooled. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, bends for easy removal of prints.
• Size: 244*264, please measure your hotbed before ordering,

• 1 x 500mm/19.68\" Linear Rail,1x MGN12H Carriage Blocks.Linear Guide Rail adpots blackening treatment on surface to prevent rusting in long-term use.
• Rail Guide Material: Heavy-duty bearing steel,which is more durability,high stiffness stiffness,high accuracy,smooth running,low noise than others.
• MGN12H Carriage Block Material: Stainless Steel.Blocks are pre-loaded.
• Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile.There are two rubber stoppers on each side of the linear rail to prevent the sliding block from falling out.
• The linear guide are small size and light weight,especially suitable for miniaturized equipment,such as routers,3D printers and plasma cutters etc.

• TRI COLOR FILAMENT

• Material: Plate is made of high quality cold rolled sheet material
• Easy To Install: Direct Drive Plate Kit for 3D Printer, Quick assembly, NO need to modify the firmware, with motor extension cable(one end is female and the other is male)
• Advantage: Upgraded Support Plate Compatible with Single Gear and Dual Gear, our product package list is installed with a single gear extruder, of course you can use a dual gear extruder installed on our upgraded Support Plate, both versions are compatible
• Warm Tips: This kit Not Suit for Ender 3 and CR 10, Please note that only applies for Ender5; Widely Used: only for Creality Ender 5 /Ender 5 Pro /Ender 5 Plus 3D Printer
• Package Content: 1kit direct extruder support plate with 4pcs pulleys, 1kit metal single gear extruder structure, 1pcs stepper motor, 1pcs length 60cm motor extension cable(one end is female and the other is male), 1pcs length 100cm motor cable (Both ends are male), 2pcs blue PTFE tube, 4pcs Allen Key, 1pcs Open end Wrench 8mm to 10mm

• 1.Silk Dichromatic Filament ERYONE dual-color silk filament is made from two individual colors, extruded into one filament strand.You can change the visible color by rotating the color-blending filament to different orientations.
• 2.High Accuracy Silk Filament The diameter of the blended dual color silk filament is 1.75mm with a tolerance of +/-0.03mm. Dichromatic PLA filament feed smoothly and constantly without clogging the nozzle or extruder making you a smoothly printing & better surface.
• 3.No Warping Multicolor Filament Perfect winded silk blended color pla filament,tangle-free before unopened, no stringing and warping.Universal compatibility with most FDM 3D printers and 3D Pens.
• 4.Strong Layer Adhesion This silk PLA filament has perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure.1.75mm Dual color silk 3D printer PLA Filament is no bubble,strong layer adhesion make the printing parts stronger.
• 5.Silk Effect Filament When printed with this 3D printing silk dual color filament, it creates a really unique look on your parts! Multicolor silk filaments can output with incredible pearlescent and gorgeous silk surface.

• The PP filament has superior dimensional accuracy, inherently low density, high fatigue, and high moisture resistance. A balance of impact resistance and dimensional accuracy while enabling the production of watertight, lightweight, and chemically resistant parts.
• Lightweight: Material density of 0.9 g/cc. Watertight printing possible with only single wall prints
• The Filament Net Weight: 1KG
• Color of White

• EASY TO INSTALL: This build plate set includes a steel plate and a strong magnet plate. Stick the magnetic base onto the construction board by tearing off the backing paper, and then align the steel plate for use.
• PRINTING: The has strong adhesion, no glue required, can achieve cold stamping, the printing has no edges, and matte effect on the bottom, exquisite and beautiful.
• APPLICABLE MODEL: The size of this build plate is 290x290mm, which is suitable for CREALITY for Ender 6 and more . Please ensure the compatibility with your printer .
• PEI SPRAYING: The adopts PEI spraying process, with even and delicate particles, the model is very easy to adhere to the surface. Double sided spray coating, both sides can be printed.
• LONG DURABILITY: The build plate has excellent wear and heat resistance, which ensures long durability under high temperate environments.