Additive Manufacturing Products By INVENTO

• Fit for 42mm NEMA 17 stepper motor
• Material: Alloy steel
• Size: 5X5X5cm(L*W*H)
• Sheet Thickness : 2mm
• Suitable for CNC 3D printer stepper motor.

• Material: PLA
• The filament is for 3D printing pen used to melt plastic at a high temperature
• Length:10 meter; Diameter: 1.75mm
• Color: White; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 1-5mm deviation due to manual measurement.

• Shaft: 5mm x 6mm
• Length: 25mm; Material: Aluminium
• Outer Diameter: 20mm
• Suitable for Nema 17 Stepper Motor or any motor having 5mm shaft.
• Package Include: 4 x Shaft Coupling

• Material: ABS
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 10 meter; Diameter: 1.75mm
• Color: Blue ; Temperature; 240 degreeC - 260 degreeC; Heatbed Temperature: 80 degreeC (min)
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Material: PLA
• The filament is for 3D printing pen used to melt plastic at a high temperature
• Length:30 meter; Diameter: 1.75mm
• Color: Green; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 1-5mm deviation due to manual measurement.

• Material: PLA
• The filament is for 3D printing pen used to melt plastic at a high temperature
• Length:30 meter each; Diameter: 1.75mm
• Colour: Pink, Green, White, Orange, Blue; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's colour may be slightly different from the pictures. Please allow 1-5mm deviation due to manual measurement.

• Material: PLA
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 10 meter; Diameter: 1.75mm
• Color: Natural Transparent Clear; Temperature; 190 degreeC - 210 degreeC; Heatbed Temperature: 60 degreeC (min)
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Bearing block is 3D Printed with 100% infill. It is solid from inside and can take considerable load. As it is 3D Printed there is some marks over its surface. Color of Bearing may be changed from picture. If you have any specific color requirement please contact us before ordering.
• Sliding Rod Size : 10mm; Holes Dia.: 5mm; Holes Centre Distacnce: 21x28
• Bearing Size: 35 x 40 x 26mm (LxWxH)
• LM10UU Linear bearing is tightly fitted inside a 3D Printed SC10UU bearing block. Working performance and dimensions are same as of aluminium block bearing.
• Package Include: 4 x SC10UU Bearing

• Model: A4988
• Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step & 1/16-step
• Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockou
• Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motors rated voltage to achieve higher step rates
• Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)

• Shaft: 5mm x 8mm
• Length: 25mm
• Outer Diameter: 25mm
• Material: Aluminium
• Quantity: 2 pieces with 8 pcs grub screw

• Model: MR105ZZ
• Bearing Inner Diameter: 5mm
• Bearing Outside Diameter: 10mm
• Bearing Thicknesss: 4mm
• Quantity: 2pcs

• Shaft: 5mm x 6mm
• Length: 25mm; Material: Aluminium
• Outer Diameter: 20mm
• Suitable for Nema 17 Stepper Motor or any motor having 5mm shaft.
• Package Include: 1 x Shaft Coupling

• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 10 meter; Diameter: 1.75mm
• Color: Yellow ; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Cable length: 1 meter
• One end is 6pin XH2.54 white terminal and other side is bare wire (no connector)
• Suitable for Nema 17 motor having 6 pin connector
• NOTE: Wire colour can be different as shown in picture. Wire will be supplied as per stock availability. if you have specific colour requirement please confirm with us before placing order.
• On other side of wire there is no connector so need to be soldered as per customer requirement.

• Model: A4988
• Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step & 1/16-step
• Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockou
• Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motors rated voltage to achieve higher step rates
• Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)

• Model: PHS12-R
• Threads Size: Metric M12
• Threads Pitch: 1.75mm
• Threads Direction: Right Hand Side
• Bearing Inner Diameter: 12mm