Additive Manufacturing Products By INVENTO

• Model : P000
• Shaft Diameter : 10mm (for which bearing is used)
• Size : 67x36x17mm
• Mounting Base Hole Diameter : 7mm
• Mounting Base Holes Centre Distance : 53mm

• Outside Diameter: 8mm; Length: 300 mm; Pitch: 2mm; Thread Type: Square Thread (ACME Trapezoidal);
• Nema 17 Stepper Motor - Torque: 4.2 Kg-cm; Shaft Diameter: 5mm; Step Angle: 1.8 deg / step
• P08 Bearing for 8mm rods
• 5 to 8mm Flexible Coupling - Fit for Nema 17 Motor
• Package Include:: 1pcs Nema 17 Stepper Motor + 1pcs 8x300mm TR8 Rod + 1pcs Brass Nut + 2pcs P08 Bearing + 1 x 5x8 Flexible Coupling

• his drive is an upgraded version of the TB6600, the breakdown of heightening to 32 segments, for high segmentation purposes. Applicable stepper motor: 42,57,86 type of 2-phase 4-phase (4-wire 6 wire line 8)
• Features: 1, 9V-42V DC power supply; 2, H-bridge bipolar constant-phase flow-driven; 3, the maximum output current of 4.0A eight optional; 4, up to 32 segments of six kinds of sub-modes available; 5, the input signal is high-speed optical isolation; 6, standard common anode single pulse interface
• 7, offline hold function; 8, semi-enclosed chassis can accommodate more demanding environment; 9, provide energy semiautomatic current lock function; 10, built-in thermal protection and overcurrent protection.
• Control signal 3.3V-24V universal, no series resistor required)
• Package Include: 1 x TB6600 Stepper Driver

• MEGA 2560 and RAMPS 1.4 set on a board, to solve complicated RAMPS 1.4 combination of interfaces, the problem of failure prone.
• Support up to 5 motor driver (A4988 or DRV8825)
• Can accept 24V input power under the same system can be hot-bed current is reduced to 1/4, an effective solution to the hot bed MOS pipe heat problems.
• The firmware can use open source firmware Marlin, ramps1.4 identical configuration and can directly replace Ramps1.4.
• The circuit board with high-quality 4-layer, heat and made a special optimization; ramps are 2 shelves.

• Model : SK20
• Shaft OD : 20mm
• Size : 60x20x51mm
• Mounting Base Hole Diameter : 6.6mm
• Mounting Base Holes Centre Distance : 45mm

• Outside Diameter: 8mm; Thread Type: Square Thread (ACME Trapezoidal)
• Length: 150 mm; Pitch: 2mm (Single Start Threads)
• Rod Material: Stainless Steel; Nut Material: Brass
• Qty: 1pcs Tr8x150mm Rod + 1pcs Brass Nut
• Application: 3D Printer, CNC, Robotics, DIY Projects etc

• Shaft Compatibility : 12mm to 12mm; Type: Rigid Self Centering
• Length: 30mm; Outer Diameter: 25mm
• Material: Aluminium; Weight: 33 grams
• Suitable for Nema 23 Stepper Motor or for any motor or rod having 12mm diameter.
• Package Include: 1 x 12mm to 12mm Coupling

• Outside Diameter: 12mm; Thread Type: Single Start Square Thread (ACME Trapezoidal)
• Rod Length: 300 mm (0.3 mtr); Pitch: 2mm
• Rod Material: Stainless Steel; Nut Material: Brass
• Package Include: 1 x TR12 12mm Lead Screw, 1 x Brass Nut
• Application: 3D Printer, CNC, Robotics, DIY Projects etc

• Model Number : PC4-M6
• Thread Size : M6; Material : brass & plastic
• Compatible with 4mm outer diameter tube
• Use: Bowden extruder in Creality and other 3D Printer Extruder
• Package Include: 15 x PC4-M6 Pneumatic Fitting

• Outer Diameter : 3 mm
• Inner Diameter : 2 mm
• Length : 500mm (0.5 meter)
• Temperature Resistance : 250+ degree Celsius
• Ideal for 1.75mm 3D Printing Filament

• Shaft Compatibility : 8mm to 12mm
• Length: 30mm; Outer Diameter: 25mm
• Material: Aluminium
• Suitable for Nema 23 Stepper Motor or for any motor/rod having 8mm diameter.
• Package Include: 2 x Flexible Coupling

• Outer Diameter : 3 mm
• Inner Diameter : 2 mm
• Length : 1000mm (1 meter)
• Temperature Resistance : 250+ degree Celsius
• Ideal for 1.75mm 3D Printing Filament

• Material: ABS
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 20 meter; Diameter: 1.75mm
• Color: Red ; Temperature; 240 degreeC - 260 degreeC; Heatbed Temperature: 80 degreeC (min)
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 30 meter; Diameter: 1.75mm
• Color: Black ; Temperature; 240 degreeC - 260 degreeC; Heatbed Temperature: 80 degreeC (min)
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.