Additive Manufacturing Products By INVENTO

• Material: PLA
• The filament is for 3D printing pen used to melt plastic at a high temperature
• Length:10 meter each; Diameter: 1.75mm
• Colour: Pink, Green, White, Orange, Blue; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's colour may be slightly different from the pictures. Please allow 1-5mm deviation due to manual measurement.

• Inner Diameter: 9mm
• Spiral Wrap for Wire Management
• It is very useful for wire management as all wires look very tidy with this wrapped over bunch of wires
• Package Include 1 x 9mm 3mtr long spiral wrap

• Timing Belt : GT2
• Width: 6mm
• Length: 1 mtr
• Pitch: 2mm
• Package Include 1x 1mtr of GT2 Belt 6mm Width

• Cable length: 1 meter
• 6pin XH2.54 Female to 4 Pin Dupont Female cable
• One end is 4pin DuPont connector head, another end is 6pin XH2.54 white terminal
• Suitable for NEMA 17 Motor
• NOTE: Wire colour can be different as shown in picture. Wire will be supplied as per stock availability. if you have specific colour requirement please confirm with us before placing order.

• Outside Diameter: 8mm; Thread Type: Square Thread (ACME Trapezoidal)
• Length: 200 mm; Pitch: 2mm (Single Start Threads)
• Rod Material: Stainless Steel; Nut Material: Brass
• Qty: 2pcs Tr8x200mm Rod + 2pcs Brass Nut
• Application: 3D Printer, CNC, Robotics, DIY Projects etc

• Material: PLA
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length: 30 meter; Diameter: 1.75mm
• Color: Gold ; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• The filament is for 3D printing pen used to melt plastic at a high temperature
• Length:5 meter each; Diameter: 1.75mm
• Colour: Pink, Green, White, Orange, Blue; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's colour may be slightly different from the pictures. Please allow 1-5mm deviation due to manual measurement.

• Material: Brass; Thread Type: M8 Metric Thread
• Pitch: 1.25mm; Inside Diameter: 8mm; For actual dimension please see diagram in photos
• Note: Threads are Metric M8, not 8mm TR8 Lead Screw. Please contact us before order for any doubt.
• Application: 3D Printer, CNC, Robotics, DIY Projects etc
• Package Include: 4 x M8 T-Nut

• Material: PLA
• The filament is for 3D printing pen or 3D Printer and used to melt plastic at a high temperature.
• Length:30 meter; Diameter: 1.75mm
• Color: Silver ; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 10-50mm deviation due to manual measurement.

• Model Number : PC4-M6
• Thread Size : M6; Material : brass & plastic
• Compatible with 4mm outer diameter tube
• Use: Bowden extruder in Creality and other 3D Printer Extruder
• Package Include: 10 x PC4-M6 Pneumatic Fitting

• Model: PHS10-L
• Threads Size: Metric M10
• Threads Pitch: 1.5mm
• Threads Direction: Left Hand Side
• Bearing Inner Diameter: 10mm

• Shaft: 5mm x 8mm
• Length: 25mm
• Outer Diameter: 20mm
• Material: Aluminium
• Package Include: 2 x Shaft Coupling

• Type: GT2 Timing Pulley
• Suitable for: GT2 6mm Width Belt
• Gear Teeth: 20
• Bore Size: 8mm
• Package Includes: 2 x GT2 Pulley

• Fit for 42mm NEMA 17 stepper motor; Suitable for CNC 3D printer stepper motor.
• Material: Alloy steel (Black Powder Coated)
• Size: 5x5cm (LxW)
• Sheet Thickness : 2mm
• Package Include 2 x Nema 17 Bracket

• Outside Diameter: 8mm; Thread Type: Square Thread (ACME Trapezoidal)
• Length: 300 mm; Pitch: 2mm
• Rod Material: Stainless Steel; Nut Material: Brass
• Qty: 2pcs 8x300mm Rod + 2pcs Brass Nut
• Application: 3D Printer, CNC, Robotics, DIY Projects etc

• The filament is for 3D printing pen used to melt plastic at a high temperature
• Length:20 meter; Diameter: 1.75mm
• Color: Blue; Temperature; 190 degreeC - 230 degreeC
• Note: Due to light and screen difference, the item's color may be slightly different from the pictures. Please allow 1-5mm deviation due to manual measurement.