Cutting Tools
Industrial & Scientific Store
Buy Online Cutting Tools from IndianConstructionIndustry.Com in Association with Amazon India
Industrial & Scientific Store - Cutting Tools
Price: 
34720
55999
34720
55999
You Save: -38%
Tegara CAT40 1/8 in x 3.0 in. Taper End Mill Tool Holder 2 pcs 202-7434-2 P[ - Product Features
- Bore Diameter: 1/8\"
- Projection Length: 3.0\"
- Nose Diameter: 0.72\"
- Drawbar Thread Size: 5/8x11 UNC
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
Aceteel Tr28 X 5 Ti-Coated Metric Trapezoidal Tap, Tr28 X 5 HSS Titanium Coated Trapezoidal Thread Tap Left Hand - Product Features
- Size Length: 9.4\"/240mm, Thread Head: 6.5\"/165mm.
- Feature Made of High-speed steel with high hardness and toughness, Titanium coating for improving wear and fusion resistance, long service life.
- Application Make or repair thread, suitable for most metals, copper, alloy steel, stainless steel(below 30HRC), cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC.
- Usage Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping.
- Package Included 1pc Tr28X5mm Metric Left Hand Ti-Coated Trapezoidal Tap.
Sowa Tool 146700 TPK 43PDR PTM30U Carbide Milling Insert - Product Features
- Insert Style: TPK
- Insert Size: 43
- Used for layout, set-up, checking heights, depths and setting angles
- Manufacturer's Grade: PTM30U
- Material Grade: C5, C5-C6
OSG USA 650026411 17/64 Exocarb Ado-3Xd Drill-Tialn - Product Features
- Easy to Use
- Made in United States
- Number of Items: 1
Cleveland C70371 29 Piece High Speed Steel Heavy-Duty Aircraft Jobber Length Drill Bit Set, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/16" - 1/2" Size (Pack of 1) - Product Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Designed for tougher materials
- Made in the USA
Arizona Vortex Tube Mfg. Co. 8 cfm Vortex Tube, Stainless Steel, Portable, Air Powered, No Moving Parts, Produces Hot & Cold Air Streams, Air Compressor - Product Features
- Vortex Tube Stainless Steel 8 cfm
- 80 -100 psig operating air pressure
- Air Inlet 1/4 MNPT
- Dimensions 8.25 inches long
1 7/16" Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 3/8" Shank Diameter, 3 Flutes, 2 3/4" OAL, (1.4375" Diameter, 1-7/16), 52246, USA Made - Product Features
- For counterboring and spotfacing in applications where machine requires a smaller shank
- 1/64\" Corner Radius, Tool Diameter Tolerance: +.001\"/-0\". Shank Diameter Tolerance: +0\"/-.001\"
- Pilot Hole Diameter:1/4, If using a pilot this is the shank diameter of the pilot you should choose
- Minimum Cut Diameter: .281\" Because there is a pilot hole the tool will not cut below this diameter.
- Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit)
Tegara 5/8 x 1.75 inch BT30 End Mill Tool Holder 2 pcs 202-7539-2 P[ - Product Features
- Bore Diameter: 5/8\", Nose Diameter: 1.50\"
- Drawbar Thread Size: M12x1.75, Shank Size: BT30
- Projection Length: 1.75\"
- TIR (in): 0.0002; Max RPM Balanced to: G2.5 20,000
- Product Included: - Balance report; - End mill locking screw with 9/16-18 UNF thread
Tegara 1/2" x 2.0" BT30 End Mill Tool Holder 2 pcs 202-7536-2 P[ - Product Features
- Bore Diameter: 1/2\", Nose Diameter: 1.37\"
- Drawbar Thread Size: M12x1.75, Shank Size: BT30
- Projection Length: 2.0\"
- TIR (in): 0.0002; Max RPM Balanced to: G2.5 20,000
- Product Included: - Balance report; - End mill locking screw with 7/16-20 UNF thread
Alfa Tools TL51335 Size #35 High-Speed Steel Taper Length Drill (12 Pack) - Product Features
- Longer length than standard Jobber drills
- #35 Diameter ( 0.1100\"), 5-1/8\" Overall Length
- 118 Degree Point, Right Hand Spiral, Straight Shank
- Made in USA
- 12 per Envelope
Allstar ALL11172 2" Taper 9.56 Degree Taper Reamer with T-Handle - Product Features
- 9.56 Degree taper and has 2.00 inch of taper per foot
- User to repair or enlarge tapered holes to accept tie rod ends or ball joints
- May also be used in a drill with a 1/2 inch chuck by removing the t-handle.
- It has a 90 day limited warranty
- Sold each
Alfa Tools TL51334 Size #34 High-Speed Steel Taper Length Drill (12 Pack) - Product Features
- Longer length than standard Jobber drills
- #34 Diameter ( 0.1110\"), 5-1/8\" Overall Length
- 118 Degree Point, Right Hand Spiral, Straight Shank
- Made in USA
- 12 per Envelope
Sowa Tool 148183 SEXT 0903AGSN-F2 PM30C Carbide Milling Insert - Product Features
- Insert Style: SEXT
- Insert Size: 0903
- Used for layout, set-up, checking heights, depths and setting angles
- Manufacturer's Grade: PM30C
- Material Grade: C5, C5-C6
XXBTLROI 1pcs Rolling Mill Bearing FC243692 FC2436105 FC2640104 FC2640125 Inner Sleeve (Size : FC2640104-IS)(FC2436105-IS) - Product Features
- Bearings
- Bearings, Balls & Bushings
If you have a business establishment in india,
Contact us
to list your business related to any construction categories.Browse by Topic
Construction Events
To Know more about the events about Air Conditioners, Basements, Bathrooms, Bedrooms, Cabinets, Decorating, Design Plans, Doors, Electrical Lightings, Flooring, Home Security, Kitchen, Landscape, Painting, Plumbing, Fixtures and many more..
© 2007 - IndianConstructionIndustry.com. All Rights Reserved