Industrial & Scientific Store - Cutting Tools

• Alfa USA hand tap - black oxide
• 1-1/2-inch by 6 tap size, 4 flutes
• Plug taps (3 to 5 threads) most common chamfer used in through or blind holes
• General purpose taps can be used by hand or under power, in through (open both ends) or blind holes (closed one end); super high-speed steel, ground thread, right hand
• Quantity: 1 per pack

• Price For: Each Standards: ASTMB221 Temper: T52 Finish: Mill Hardness Scale: BHN Length: 8 ft. Material: Aluminum Item: U-Channel Length Tolerance: +/-1.000\" Type: Corrosion Resistant Typical Hardness: 60 Typical Yield Strength (PSI): 21, 000 Alloy Type: 6063 Tensile Strength (PSI): 27, 000 Wall Thickness Tolerance: +/-0.007\" Base Width Tolerance: +/-0.034\"
• Leg Length Tolerance: +/-0.024\" Leg Length: 2\" Base Width: 5\" Wall Thickness: 0.188\" Country of Origin (subject to change): United States

• Amana Tool is an industry leader for over 40 years
• Devotion to consistently providing the highest quality
• Solutions for manufacturers, fabricators, display and cabinet professionals
• U.S.A. Corporate headquarters and warehouse, located in new York
• Commitment to offer the highest consistent quality and innovative products

• Not include boxes note:- since the link is a multi - attribute product, please pay attention to the title & description & then purchase or place order. 15pcs/set woodwork
• 2 pack edc screwdriver nd 2 pcs multi tool screwdriver(with 2 pcs separate head screwdriver2 pcs key ring) 2. Variety of specialty bits : 56 different kind of screwdriver bits which made of chrome-va
• Tools are neatly stored in a sturdy case that keeps them secure clean organized and easy to find.
• Application: can be used to turn screws repair skis bicycles toys etc. You can develop more applications. The best gift for
• Product Color: Multicolor; Package Contents: 1/4''/8mmshank Carbide Router Bit for Wood Cutter Engraving Cutting Tools, Pack of 3 Set, Cutting Edge Length: 8mm Have Box

• Bore Diameter: 1/2\", Nose Diameter: 1.37\"
• Drawbar Thread Size: M12x1.75, Shank Size: BT30
• Projection Length: 2.75\"
• TIR (in): 0.0002; Max RPM Balanced to: G2.5 20,000
• Product Included: - Balance report; - End mill locking screw with 7/16-20 UNF thread

• Package Length: 10.0\"
• Package width: 10.0\"
• Package Height: 10.0\"
• Country of Origin: CHINA

• Uncoated (Bright)
• 30 Helix Angle
• 1/8 (.1250) Shank Length, .0230 Flute Length
• Carbide Made in USA
• Photos may not be the exact representation of products.

• Bore Diameter: 3/16\"
• Projection Length: 3.0\"
• Nose Diameter: 0.875\"
• Drawbar Thread Size: 5/8x11 UNC
• TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000

• 1.Quick discharge of iron chips
• 2.Suitable SP insert.
• 3.Compared with the traditional troublesome bit, the effect is improved by 5-10 times
• 4.Direct drilling without central hole
• 5.Break the iron chips and do not stick to the drill

• Center cutting
• Specific geometries targeted for steels, stainless steels, high-temperature alloys, and titanium
• Stub, regular, long, and extra long lengths for all applications
• Special designs with higher number of flutes and increased helix angles for super finishing applications
• Latest coating technology, including Victory grades

• Spiral Flute Tap - High Speed Steel, Ground Thread
• 12-24 Tap Machine Screw Size
• Plug Style, 2-3 Flutes, H3 Grind Limits
• Chamfer: Plug (3 to 5 threads)
• Quantity: 12 per Pack

• 3 degree undercut router bit with shank mounted bearing guide for routing the leading edge on doors to allow a tight fit against jamb.
• Suitable for use in medium - heavy duty Routers with a minimum wattage of 1500 watts.
• Cutter specification :- diameter 24.2mm, Cut depth 50mm, Angle 93 degrees, Overal length 100mm, Shank diameter 1/2in (12.7mm).
• PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
• 1/2in shank for use in bigger routers and heavier applications with 'K' mark shank to ensure safe working practices.