Industrial & Scientific Store - Cutting Tools

• All are double cut
• Contains 8 carbide burs
• Package Weight : 0.484 kilograms
• Unit count: 1.0

• Interchangeable with kdk-0, 100, 150 & 200 tool posts
• All working parts are hardened and ground
• Lathe Swing: 8-12\"
• Lock Down Bolt Diameter: 7/16\"
• Dovetail is 1. 75\"

• Carbide Tipped Bit
• Cross Tip W Flute
• 4 Cutting Points
• SDS Max
• 2 in diameter Masonry Drill Bit

• 3 degree undercut router bit with shank mounted bearing guide for routing the leading edge on doors to allow a tight fit against jamb.
• Suitable for use in medium - heavy duty Routers with a minimum wattage of 1500 watts.
• Cutter specification :- diameter 24.2mm, Cut depth 50mm, Angle 93 degrees, Overal length 100mm, Shank diameter 1/2in (12.7mm).
• PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
• 1/2in shank for use in bigger routers and heavier applications with 'K' mark shank to ensure safe working practices.

• For 40mm(1-1/2\") thick full bullnose edge
• Fits on polishers/ grinders with 5/8\"-11 thread spindle
• The nylon guide assure the profiled edge remains straight
• Utilizing vacuum brazed diamond technology
• Wet or dry application optimal speed 3 500- 4 000 RPM.

• Bits and Case are Made In the USA
• 1/16-1/2 X 64ths Size Range
• Jobber Length - 118 Deg. Point Style
• High Speed Steel Material
• Black Oxide Finish

• Indexable face mill 7 Flutes , 90 Degree Cutting Angle, 3 inch Cutter Diameter, 1 inch Bore Diameter
• Apkt1604 installed.when one of the inserts dulls, simply invert the insert, and use another tip to cut. no need to resharpen the dull insert.
• Fitted with a 10? positive rectangular insert allow the high depth of cut and feed per tooth
• Used for All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless,heat resistant steels, cast irons and aluminum alloys
• Uses APKT / APHW / APKR_APHT / APMT insert

• Bore Diameter: 3/4\", Nose Diameter: 1.70\"
• Drawbar Thread Size: M12x1.75, Shank Size: BT30
• Projection Length: 2.75\"
• TIR (in): 0.0002; Max RPM Balanced to: G2.5 20,000
• Product Included: - Balance report; - End mill locking screw with 5/8-18 UNF thread

• Technical Specifications Weight: 22 KG Voltage : 220V Dimensions: 50x50x50 CM Rated Power: 1200 Watt Adjustable Heating Temperature: 10-200 Degree Celsius Motor Power: 1200 Watt Air Power Pressure: Air Compressor Pneumatic Control Edge Width: 6-60MM Edge Banding Speed: 18Mtr/Minute Edge Thickness: 16-70 MM Heating Time: 5-10 Minutes Belt Break Method: Automatic (Paddle Switch Control) Types of Edge Banding Material: Glot Pot Volume : 1000ML Warranty: 1 Year complete care warranty
• Product Introduction the weight of this product is about 22 kg the volume is small it is easy to carry and the edge sealing speed can be adjusted freely double sided blowing automatic belt breaking both curved and straight using a 1.6 CM thick cutter super large port do not need to be glued frequently and the independent switch is easy to operate saving time and effort
• Packaging Box : Usually, we use standard export wooden cases for packing this edge banding machine. We will first wrap the entire board edge banding machine to prevent the pvc edge banding machine from being damaged and scratched. Then fix the fuselage with a wooden box to prevent the edge sealing machine from being bumped and damaged during transportation. If you have special requirements, you can contact us.
• With 1 Year Complete Care Warranty , it make your satisfaction above all, since its all spare parts are available which may be obtained by writing at amazon , your mail will be answered with 4-5 hours, no matter whatever you location our service reach you on time.
• To watch the Product video search on youtube : LUXTER MKT100

• PASSAGE DOOR 99-267 99-518

• - Confused about choosing the best CNC router bits? For those new to CNC routers, IDC Woodcraft offers the ideal CNC router bits tool kit for carving wood. With these high-quality carbide bits, you'll be on the right track from the start. These bits are made of tungsten carbide steel and are built to last. This American-made set is intended to cover almost any type of CNC project you may design.
• % - Designed to be the workhorse of your CNC wood carving journey, our bits kit is equipped 90?/60?/30? v-bits, 1/4?, 1/8? & 1/16\" downcut end mills, an 1/8\" up-cut 'drilling' endmill, 1/4\" & 1/8\" ball nose endmills, & 1\" surfacing bit and 2 collets. Includes a 2nd bonus 1/8? downcutting endmill bit, making this a 13-piece set.
• - From elegant cuts & delicate carves, to cool 3D carvings and angled inlays, these bits are designed to deliver it. Use 30, 60, and 90-degree v-bits with blade-style edges to create super-clean cuts in groove carving. Ball-nose end mills are used for beautiful accent work and 3D carving. The spiral cutting edges of downcut router bits and up cut end mills give extremely clean finish cuts.
• - Primed for wide application in all cnc mill projects. This router bit set is made to provide the highest quality required by all craft experts. Professional and amateur wood carvers alike will find this wood router tool kit to be the perfect option, to be used for precise work such as lettering, 3D carving, wood trim moulding, crown moulding, inlaying, CNC engraving, accent work, and grooving
• - 1/4?, 1/8?, and 1/16? downcut end mill bits are used for high-quality rough and finish cuts on any species of wood. Up cut end mill is used for fast material removal, slotting, and peck-drilling. Knife-style v-bits create sharper, angular cuts that leave a superior finish. The 1/8 ball nose bit is excellent for 3D carving projects. slab flattening router bit is excellent for flattening warped boards and surface/resurfacing spoilt-over boards.
• This set includes a feeds & speeds table for all bits in the set, and for a wide variety of other popular CNC router bits. For users of the Vectric design software, a database is available with video instructions to guide you how to install the database. Works for all versions of Vectric.
• For those new to CNC routers, 7 easy CNC project designs are included with instructions. All files are provided in various formats so they can be used in almost all design software. Some files include g-code that can be loaded right into the CNC router controller. In other words, many of them are plug-and-play. This helps the new user get familiar with their CNC router to accelerate their learning curve.
• An entire list of all videos on the IDC Woodcraft YouTube channel. The list is organized for those just starting with their CNC router to ensure they get off to a smooth start.

• 29 PC Set: 1/16'' through 1/2'' By 64ths, Fractional size; Tolerance: +0.0002\" - 0.0000\"
• Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers
• They are regularly pointed with a 45?chamfer. The straight-flute design is recommended for most general-purpose reaming
• Thru 1/2\" diameter +.0002\" -.0000\". Above 1/2\" to 5/8\" +.0003\" -.0000\". Above 5/8\" to 1-1/2\" +.0001\" -.0004
• Straight Flute, Right-Hand Cut; Straight Shank; High Speed Steel

• Made in USA
• 34Diameter Shank
• EJECTOR pin included
• M2 high speed steel
• Unique cutting geometry allows for long life yet aggressive cut