Water Treatments - Water Level Controller

• Warranty : 18 Month Manufacturer. Warranty Service : Repair or Replacement. Package Contain : 1 Water Level Controller Unit. 6 S.S Sensors. 1 user manual with technical details.
• When the water level of the overhead tank becomes low means water gets down from the middle sensor and water is present in the underground tank or sump, the motor gets started automatically. The tank starts filling up. when the water level reaches to the higher level, the motor automatically gets switched off.
• AUTO OFF WHEN TANK IS FULL OR SUMP IS EMPTY.
• Sensor fault detection provided, if sensor got failed LED start blinking
• Auto and Manual mode switch available

• Size : 1/2 inch( 0.50 Inch) - Length : 30 Meters (97.50 Feet) - Includes 7 Mode Nozzle Spray, 1/2 inch tap connector and 3 clamps for leak proof operations.
• Used in Gardening, Car and Bike Wash, Pet Bath, Floor Clean, Construction, Sprinkling, Agriculture.
• Professional grade next-generation Rubber Braided Hose Pipe with 5-year replacement warranty, the lightest and strongest rubber garden hose in the market.
• You want your hose light for home use, strong for industry, durable and flexible in all weathers.
• Tired of cracking PVC hoses and heavy rubber hoses, No more stiff hoses in winters. MADE IN INDIA.

• Digital LCD Display
• one touch calibration of pump parameters
• Inbuilt high/low voltage, dry run & short circuit protection
• Suitable for single phase domestic pump upto 15 Amps
• ABS rust & shock proof enclosure with IP54 protection class

• NO NEED TO WAKE UP EARLY MORNING TO CHECK WATER SUPPLY, 12 Months Warranty, Compatible with Single Phase Mooblock and tullu Pumps (upto 3 HP) of all makes)

• AUTOCUTS MOTOR WHEN TANK GETS FULL
• SAVES ENERGY AND WATER
• HIGH AND LOW VOLTAGE PROTECTION
• 6 MONTHS GUARANTY
• LED INDICATORS FOR MOTOR RUN AND POWER

• water float switch on/off water tank pump

• Warranty : 1 Year Manufacturer. Warranty Package Contain : 1 Water Level Controller Unit. 3 Carbon Sensors. 1 , mounting screw. 1 user manual with technical details
• This controller comes with water level indication which shows water level in the tank. Working : This controller will start the motor by pressing start button of the controller and it will automatically switch OFF Motor, when the tank is full. User can press start button at any time they want
• Suitable for 0.1 HP to 5.0 HP Motor. Supply Voltage : 220-270 VAC. Sensing element : carbon sensor, it is free from oxidation, long life. Any conducting wire can be used for sensor. It can be connected with or without starter
• This model suitable for any single phase Starter panel see diagram above for connection. Power on and OFF LED indication provided. Motor on and OFF indication provided. Water level indication provided. ABS enclosure. compact size

• Suitable for Single Ph Upto 1 HP
• Fully automatic water level controller with dry run protection single phase
• Contact capacity : 7 A
• Easy to Use and Install

• [CLEAR DISPLAYS] The front of the product has complete functions display, clear text, clear functions and usage at a glance.
• [GOOD INSULATION] Using flame retardant shell, with good insulation, effectively reducing potential safety hazards.
• [HIGH ACCURACY] The water level controller has high accuracy and low interference, with reasonable structure and good practicability.
• [SAFE OPERATION] Adopt the conversion type electric shock method, the contact capacity is 250VAC 5A, the operation is safe.
• [EASY INSTALLATION] The liquid level relay is small and compact, easy to install and disassemble, and does not take up space.

• Working : This Device will start motor by pressing start button of the Starter and it will automatically switch OFF Motor, when the tank is full.
• Waterproof Magnetic Float Sensor ,Never corode due to water
• Longer Life No Mechanical System / Avoid Oerflow
• Fully Safe No AC current flow in Water Tank
• Automatic OFF motor when Wire is Damage
• Supply voltage : 190-250 V AC, Suitable up to 0.5 / 1.0/1.5/2/2.5/3 HP Motor.
• Easy to Install and remove this machine

• 20A@230V
• Auto & Manual Mode
• Tank water level indication, pump on indication
• Anti corrosion stainless sensor
• Easy To use and Install

• THIS IS MODEL IS COMBINATION OF MOTOR STARTER AND WATER LEVER CONTROLLER Microcontroller based water level controller, all signal will pass in sensor through AC filter circuit that provides filter signal to sensor, that improve life of sensor, Digital display for voltage and ampere high low voltage protection overload protection with spp
• When water level of overhead tank becomes low means water get down from middle sensor and water is present in the underground tank or sump, motor get start automatically. The tank starts filling up. when the water level reaches to the higher level, the motor automatically gets switched off. AUTO OFF WHEN TANK IS FULL OR SUMP IS EMPTY. This model have dry run protection so it only start motor if water present in underground tank or sump
• Suitable for 0.1 HP to 7.5 HP Motor, It protect motor from phase failure. It protect motor from phase interchange. It protect motor from voltage different between 3 phase
• high voltage protection, low voltage protection, Short circuit protection overload protection Adjustable overload from 4 A to 20 A RESET button provided to reset unit Start and stop button provided high voltage indication low voltage indication overload indication Power indication provided Input Voltage : 415 VAC Output Voltage : 415 VAC
• It has current based dry running. If motor runs without water then it take lower current then its actual current. so when motor current get down from its actual current, it stop motor and protect motor from dry running

• (1)Fully automatic water level controller with dry run protection single phase
• (2)Anti corrosion stainless sensor
• (3)Elecrolysis -Free Controller
• (4)NO Chemical Reaction Inside Water
• (5)Contact capacity : 20 A

• Power Supply: 180 to 245V, 50Hz, AC
• Sensing: Through corrosion resistance, solated 5V AC sensors or float sensor
• Output: 230V, 50Hz, AC for 1HP motor and capacitor connecting terminal for submersible pump. ( SSR is suggested in the input of 3 Phase or more then 1HP motor.
• Light weight, low in cost.
• Easy to install and operate.

• Can be Used With hydroponics, Salt water Tank, Fresh water tank, Gardening, aquariums for power head control, Pet bowls, fish tanks, filtration, RO , Water Coolers, Water Filters ,Dosing pumps etc.
• Features : Float Can Be Reversed For NO / NC By Opening Bottom Lock as Per Your Requirement / Contact : NO / NC
• Stem Material : PP Corrosion Free , Technology : Magnetic Advance Technology , Wire Length : 2 Meter ,
• Ideal Operating Ratings : Voltage: 2 to 50V DC .Current: 1amp / Max Current : 1.2A (DC), Max Switch Watt : 10W
• Switch Configuration : SPST , Float Ball Material: PP With excellent Acid and alkali / alkaline resistance , WIRE : Premium Tin Coated 14/40 Single Core For High Performance

• Suitable for any AC motor that are operated by simple switch/MCB (Single phase motor - Monoblock, Jet Pump, Submersible, etc.)
• Distance covers upto 1000 meters in line of sight and supports for 6 storey building/apartments. Unique ID helps to avoid data collision.
• Visual indication - Power ON, Motor ON, L/H voltage, RF Signal, Four water level indication. Corrosion free sensor
• No cabling is required between overhead tank (Transmitter) and controller (Receiver) unit.
• Advanced Embedded Technology. Long life. Easy to Install