Electricals Store - Electric Motors

• Motor size: 4x10mm; Output shaft: 0.7mm; Output shaft length: 3.5mm; Lead length: about 15mm (end with a terminal)
• Voltage: 3.7 V current: 16MA speed: 56000 RPM
• Voltage: 4.5 V current: 19MA speed: 70000 RPM(Recommended)
• Voltage: 5 V current: 21MA speed: 75000 RPM
• Voltage: 6 V current: 23MA speed: 86000 RPM

• Motor Diameter: 15mm
• Gearbox Reduction Ratio: 51.4 : 1, full metal gear
• Output gear outer diameter: 7mm (12 teeth, 0.5 module)
• Large current, high torque, stable performance.
• Simple and easy to use, small size, elegant appearance.

• Features: Rated Voltage: 12V, Speed: 22000RPM 5/100
• APPLICATION: Great replacement for the rusty or damaged DC geared motor, Widely used in hand drill, electric screwdriver, all types models etc.
• ADVANTAGE 1: and light weight geared Electric Motor, Benefiting from high torque and low noise,Small volume,big torsion.
• ADVANTAGE 2: Good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.
• Package Includes: 1pcs x Electric Gear Motor

• 200K cycles UL testing approval for Dp contactor
• Replace SIEMENS 42 series dp contactor 3 pole 20FLA 25FLA 30FLA 240V coil
• UL,CUL CSA, SEV S+, CE Approved AC contactor.All our DP contactors series meet the ARI Standard 780/790-1997 and UL508 standard
• Contactor Coils have class b insulation
• Replacement parts number: CR453AC2BAA, 3M30-C, 8910DPA33V09, 90165, 3100-30U9, C25DND330B, 42BF35AG, 400-DP30NA3, A77-309044A-2, ACC330UM30,C325C, DP202403, DP252403, HCCY3XU02CY, C330C, DP302403.

• Scope of application: office automation, home automation, medical equipment, security equipment, consumer electronics, aircraft models, automotive electronics fields.
• High speed mute, can CW and CCW
• The cooling fan keeps the motor constant temperature
• Pure copper wire, low heat, long life, low loss
• Rotor uses copper wire winding, small resistance, strong electrical conductivity, so that the motor torque increased

• Features: Rated Voltage: 6V, Speed: 50RPM ?5%, Shaft Diameter: 3mm, D Shaft, Shaft Length: 9mm ;Package Includes: 1pcs GA12-N20 DC Geared Motor with Encoder Test wire
• APPLICATION: Great replacement for the rusty or damaged DC geared motor, Great for speed control,widely used on small robots, etc.
• ADVANTAGE 1: and light weight geared Electric Motor, Benefiting from high torque and low noise,Small volume,big torsion.Good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.
• Gear motors can be found in many different applications. Such as for DIY RC Hobby, car module, planes and more.
• Please check the current and voltage of the motor before use, and do not overload it

• This is 370WG worm geared DC motor with zinc alloy aluminum housing and pure copper turbine and worm inside for greater durability.
• You can change the wiring of the motor positive or negative change the direction of rotation of the motor, using full metal gear, low noise, with self-locking function.
• Rated voltage: 12V DC ; Speed: 0.9RPM; Shaft: D-shaft ; Shaft Diameter:6mm ; Female thread diameter of shaft:3mm*12mm ; Total Shaft Length: 35mm ;
• Application: Label machines, remote control curtains, automatic voltage regulators, barbecue grills, ovens, washers, waste disposal machines, household appliances, coin machines, paper currency recognizers, automatic actuators, coffee machines, towel machines, printing machines and Stage lighting. This section is suitable for small motor configuration high speed ratio, the installation space is limited occasions, large torque output.
• \"-The speed, voltage can be designed according to customer requirements. If you need other models of motor, you can contact us by email. Welcome to bulk purchase and OEM orders!

• Dual bts7960 high current (43A) H-bridge drive; The power supply voltage is 5.5 to 27V; Isolation chip 5V power supply( can share 5V with MCU).
• It is isolated from the single-chip microcomputer 5V to effectively protect the single-chip microcomputer.
• It can realize the forward and reverse rotation of the motor, and the maximum frequency of two PM inputs is 25kHz; Two over-current thermal error signal outputs.
• Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2).
• Package included:3pcs BTS7960 43A High Power Motor Driver Module/ Smart Car Driver Module.

• Worm reduction design, the maximum bearing force of the gear is about 30kg, and the speed can be controlled by the governor.
• The gearmotor housing is made of zinc alloy die casting, which has good wear resistance and easy heat dissipation to extend the service life. Supports back and forth rotation and self-locking function, making operation more flexible.
• Stable Performance: They all use original imported semiconductor chips and the circuits are stable and reliable after a series of tests such as voltage, current and functions before leaving the factory.
• GOVERNOR: 3. Motor can be positive or negative. When the working direction is not suitable, the direction can be changed by adjusting the sequence of the wires. 4. The potentiometer knob can change the duty cycle of the governor's output, thus changing the speed of the motor.
• APPLICATION FOR: These DC geared motors are often used in electronic locks, exhaust hoods, displays, robots, smart devices, barbecue machines, etc.

• [Specification]: Rated current 0.32A; Rated voltage 12V; Rated power 150W; Speed 13000-15000rpm; Shaft dia 5mm/0.1inch
• [Large ]: This miniature dc brushless motor has large ; high power and high speed
• [Premium Material]: The dc 12v motor adopts copper wire and metal gear; Wear-resisting, & longlasting
• [Widely Application]: This 775 motor is widely used for electric tools, electric screwdriver, electric fan toys, machine, paper , vacuum cleaner, etc
• [Friendly Service]: Sellers are right here 24/7 when you need any help with this brushless motor; Remember that we are just a mail away

• [Large transmission torque]: Gear Motor DC with Speed Encoder has stable gear transmission, high efficiency, wear resistance and large transmission torque.
• [Equipped with encoder]: Equipped with a two-phase geared motor with encoder, powerful and practical.
• [Support rotation and reversal]: The speed encoder gear motor can support rotation and reversal, so that the work is more accurate.
• [After-sales service] GA25-370 brush DC motor has passed quality inspection before leaving the factory, you can use it with confidence, if you have any questions, please contact us as soon as possible.

• Easy-to-install, Replacement Motor End Cap for KFI Assault, A- and U-Series Winches.

• Country of Manufacture: CHINA; Material: Carbon,Metal
• Net Weight: 64g; Package Content: 10Pairs x Motor Carbon Brush
• Main Color: Dark Gray,Silver Tone
• Total Length(Approx.): 27mm/1.06\"
• Carbon Brush Size (Approx.): 16mmx13.4mmx6.4mm(L*W*T)

• Working Voltage: AC 12V (NOT DC 12V)
• Speed: 5r/min
• Package?TYC-40 12V 5RPM AC Synchronous Motor Shaft 4.6cm *2PCS
• Shaft Length: 46mm;Shaft Diameter: 4.5mm?Motor diameter: 40mm;Motor height: 18.7mm;