Electricals Store - Electric Motors

• air conditioner contactor 2P 30A 120V

• ApplicationThe centrifugal switch is mainly used to control the starting coil of the single-phase motor
• FeaturesWhen starting, the starting circuit starts to start by the centrifugal switch. When the starting is finished, the motor becomes running
• Automatically Cut OffWhen the certain speed is reached, the centrifugal switch is turned off and the starting circuit is automatically cut off
• Simple OperationInstalled on the rotor of the motor, the circuit is connected in series in the start loop, which is easy to install and convenient to use
• Brand New100% brand new high quality right single phase motor, strictly full tested to ensure the best quality before shipment, safe to use

• This is a Brand New Upgraded ClimaTek Condenser Contactor with a Sealed Contact
• Top Quality ClimaTek Replacement Part, Built to Last!
• This ClimaTek Part Directly Replaces All 1 Pole, 25 / 30 Amp, 24 Volt Coil A/C and Heat Pump Condenser Contactor Relays!
• Designed to work with all brands of AC and Heat Pump Units.
• Exact Fit- No Electrical Adapters, Modifications, Mounting Hole, or Wiring Changes Needed!

• 2pcs TB6600 4A 9-42V CNC Controller Stepper Motor Driver for Single Axis Two-Phase Hybrid Stepping Motor for CNC

• MATERIAL - plastic, metal.
• SIZE - plastic body size: 30 x 12.5 x 6 mm / 1.18 x 0.49 x 0.24 inch;bolt hole diameter: 3mm;handles diameter: 2mm;handles length: 13mm;pitch distance: 9.5mm.
• FEATURE - The bolt made of quality metal.Cross axis wiggle is imperceptible.
• APPLICATION - It operate smoothly against a firm spring pressure for positive action,perfect for your RC project.
• PACKAGE CONTENT - 1 x canopy hatch lock.

• Features: Adjustable Length:Overall Approx 46mm/1.81 inch; Center of each hole Approx : 38mm/1.5 inch; Adjustable range: 1mm-20mm
• Usage: Vehicles & Remote Control Toys, for: 94101/94102/94103/94122/94123/94762/94763/94111/94188
• Aluminum Alloy Material, Durable,Great Strength, which is durable and improves the performance of the RC cars. It is a perfect upgrade replacement accessory.
• Easy To Install,M3 Thread 3mm Hole
• Package Include:2 Pcs x Servo Link Package

• Features: Adjustable Length:Overall Approx 43mm/1.69 inch; Center of each hole Approx : 33mm/1.29 inch; Adjustable range: 1mm-20mm
• Usage: Vehicles & Remote Control Toys, for: 94101/94102/94103/94122/94123/94762/94763/94111/94188
• Aluminum Alloy Material, Durable,Great Strength, which is durable and improves the performance of the RC cars. It is a perfect upgrade replacement accessory.
• Easy To Install,M3 Thread 3mm Hole
• Package Include: 1 Pcs x Servo Link Package

• With copper wire production, for use.
• Easy to wire and install.
• Durable construction for long-lasting performance.
• Widely used in power tools, electric fans, electric cleaners, etc.
• Small size, but great torque.

• CW / CCWA Permanent Magnet Motors of CW(clockwise), CCW counterclockwise and CW/CCW(automatically reverse when there is a big resistance).
• WIDE APPLICATIONSPermanent magnet generator mainly used for electric fan ventilation mechanism, heater, all kinds of display shelf, handicrafts, lamps, lighting, toys and other equipment, air conditioning motor and rotary motor of microwave, etc.
• SELF- DESIGNThis synchronous motor has self- function, motor coil will not burned if overload or blocked.
• STABLE If this synchron motor works under rated frequency, speed will not affected by voltage, very stable.
• DETAILS Outer diameter: 31mm / 1.22in, Shaft length: 19mm / 0.75in, Shaft diameter: 3mm / 0.12in. Type(Optional): 6V 4000rpm,12V 4000rpm,12V 8000rpm, 24V 3500rpm, 24V 5000rpm, 24V 8000rpm.

• Fit to the micro 775 motor as a bracket or holder
• Material: Steel; Screw holes: M4(Motor is NOT included)
• They fit along the shaft of the motor, allowing you to fit your motor into a smaller space
• The mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option.
• Package included: 2Pcs x 775 motor mount bracket(Screws Included)

• Product Name: Carbon Brushes Replacement
• Applications?Used for carbon brush replacement on various power tools and motors,such as hammer drills, circular saws, cut-off saws and angle grinders.
• Warm tip?Worn brushes can cause the motor to smoke or spark and should be replaced if it occurs. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems that may not be solved by replacing the carbon brushes.After replacing new carbon brushes, if it doesn't take a few minutes or hours for the carbon brushes to wear out or wear in half, it means your rotor is bad. Please replace the rotor promptly.
• Package Contains 30Pcs 10 sizes carbon brushes, each size 3Pcs(7x17x19mm, 5x11x18mm, 6.5x7.5x13mm, 6.5x13.5x18mm, 6x10x17mm, 6x9x14mm, 7x11x18mm, 6x8x14mm, 5x8x13mm 5x8x15mm).
• WORRY-FREE?If you are not satisfied with our products for any reason, please feel free to contact us and we will solve the problem. Hassle-free lifetime service

• Dual H-bridge, capable of driving two DC motors instantly, single circuit 7A current, high power;
• Logic voltage 5V;
• Signal optocoupler isolation input, can be directly controlled by 10 ports without interference?
• Undervoltage protection to prohibit instantaneous high current from burning out the module?
• High power TVS and electrostatic discharge circuit, suppressing transient interference pulses and static electricity,improving EMC performance, stable and reliable product, industrial grade design.

• HIGH QUALITY MATERIALSIt adopts machining, magnetic material treatment, and insulation treatment, features stable and reliable.
• STANDARDRated power: 100 (W). Product type: brush dc motor. Rated voltage: 12 (V). Rated current: 4.5 (A). Rated speed: 22000 (RPM). Rated : 0.02 (NM). As the power source of the motor load in the driving situation without special control requirement.
• HIGH PERFORMANCELight weight, high and low RPM. and not easy to damage. Applicable to audio and video equipment. For example, in a VCR, micro motor is the key component.
• WIDELY USED USEUsed in office automation equipment, computer peripheral equipment and industrial automation equipment. Micro electric motors are used in disk drives, photocopiers, CNC machines and robots.
• GUARANTEEWe provide 90 days money-back and 24 months warranty, So please don't hesitate to contact us if you have any questions or concerns.

• SELF-LOCKING MOTOR: This Electric Drive Motor is worm gear motor with self-locking function, which means the output shaft does not move without a motor, and this Motor is 100% brand new and has high quality assurance, and hope can meet your basic need.
• VERTICALLY ARRANGEMENT: The gearbox output shaft direction of the motor shaft is arranged vertically, which can be convenient for your work and easy to install, in this case, this Electric Drive Motor can fully save your time and energy.
• NO-LOAD SPEED CHOICE: The No-load speed choice of Motor are 5rpm / 6rpm / 20rpm / 40rpm / 62rpm, which can be chosen by you according to your demand, besides, you don't have to worry about the working performance of this Electric Drive Motor.
• INSTALLATION SIZE ADAPTER: The entire body of the motor output shaft is short, relative to the general direction of gear motor , widely adapted to some of the installation sizes of this aspect is required, and this Electric Drive Motor is great helper to you.
• WIDELY USED MOTOR: This Electric Drive Motor can be widely used in windows, a door opener, miniature winch and other occasions, which is an ideal choice for you, If you have any questions about this Electric Drive Motor, please feel free to contact us immediately.

• PARAMETER - material:copper;hole diameter:1.6mm;body diameter:4mm;total length:11mm.
• FEATURE - only work for linear movement, not on servos.
• for - 1.6 mm fit 1.4 / 1.5 / 1.6mm.
• APPLICATION - compatibile with RC airplane;Adjustable pushrod connectors.
• PACKAGE CONTENT - 10 set push rod connectors.