Electricals Store - Electric Motors

• Material is Carbon and Metal, pack size is 12x8x2cm
• Also can be used as replacement parts for other brand power tools as long as the Dimension is suitable.
• Hundreds of carbon brushes are listed in our store ,you can always find the fit-size carbon brushes.
• Carbon brushes are low-value consumables. The length of use is related to the operating conditions and the newness of the motor. There is no definite use time.
• Carbon motor brushes are one of the most commonly replaced power tool components.

• Compatible With Electric Impact Wrench Carbon Brushes 68099 Harbor Freight Motor

• 4W Rated PowerLow rated frequency, turntable synchronous motor speed is not affected by voltage. Rated power: 4W, synchronous motor 50/60Hz Voltage: AC 100-127V
• Multiple DirectionsA synchronous motor of CW (clockwise), CCW counterclockwise and CW/CCW (automatically reverse when there is high resistance)
• Synchronous Motor DesignThis synchronous motor is composed of permanent magnet synchronous motor and reduction gears
• Good PerformanceThe motor coil will not burn if overloaded or blocked.
• Easy to UseThe electric motor is low consumption, large torque, low noise, small size, light weight and easy to use

• Country of Manufacture: CHINA; Material: Metal,Electronic Parts
• Package Content: 1 x DC Motor
• Main Color: Silver Tone; Rated Voltage: DC 6V-12V
• Rated Speed: 25000RPM; Motor Body Size: 28 x 12mm/1.1\" x 0.47\"(L*D)
• Shaft Size: 6 x 1.5mm/0.24\" x 0.06\"(L*D); Model: 130

• Parameter- Voltage:DC 3V ; Speed:18500RPM ; Motor diameter?12mm/0.47\" ; Motor length:30mm/1.18\"
• Material- The electric motor is made of metal, and the output shaft is made of high-hardness copper, which has good toughness and impact resistance
• Features- DC micro motor is durable, stable performance, shockproof, wear-resistant, and high precision. It is an excellent substitute for rusty or damaged DC motors on the machine
• Function- DC motor can adjust the speed, but the motor speed can only be reduced, not increased; low noise
• Application- Micro motors are used in electronic game machine printers, rear-view mirrors, headlight beam level adjusters, car toys, DIY hand drills, electronic equipment, etc

• The worm gear motor with self?locking, ie, in the case in the absence of electric motors, the output shaft is not to move, that is self?locking. You can use it with confidence.
• The output shaft direction of the motor shaft is arranged vertically. Bring you a new and different using feeling.
• The entire body of the motor output shaft relative to the general direction of gear motor short widely adapted to some of the installation sizes of this aspect is required. Meet your needs.
• The reducer output shaft arranged vertically with the motor shaft, whole motor output is relatively short,can be widely used in various of situations that require special installation size. A great choice for you.
• This geared motor has wide applications. Working on boat, car, fan, home Appliance, BBQ, Machinery and equipment, electric curtain, stage lighting, counter, faucet wet towel dispenser, vending machines, automatic monitoring and other modern art. Its quality is guaranteed.

• Material:Graphite + Metal
• Carbon Brush Size:13 x 8 x 5mm/0.51 x 0.31 x 0.2\"(L x W x T)
• Application:power tool,hand drill,trimmer, electric planer and so on
• Carbon motor brushes are one of the most commonly replaced power tool components.
• New brushes can restore a motor's electric braking.

• LD101-10G is an X-band radar module operating at 10.525GHz
• Adopting fixed frequency, directional transmission, and reception antennas, using chip integration technology and microwave antennas
• It has anti-interference characteristics, small size, no wall penetration, high stability, good consistency, and good suppression effect of clutter and high-order harmonics
• Integrate intermediate frequency demodulation, signal amplification, digital processing, light intensity detection, timing, and other functions, while opening serial port functions to facilitate user parameter adjustment
• Adopting pulse power supply mode, the average power consumption is as low as 7mA

• Product Name : Carbon Brush;Carbon Brush Size (Approx) : 12.7 x 5.5 x 4mm/ 1/2\" x 7/32\" x 5/32\"(L*W*H)
• Total Length(flat) : 33mm/ 1.3\"
• Material : Carbon, Metal
• Net Weight : 16g
• Package Content : 10 Pairs x Carbon Brushes

• *This DC Motor applies on 3-12V DC with two ventilation holes.Excellent quality and long service life, It is easy to disassembly and install.
• *Type: 500 DC Motor Size: 32.2*32.2*19.5mm Shaft Diameter: 32.2mm Shaft Length: 19.5mm Working Voltage: 3-6V Rotation: CW/CCW?
• *Speed (DC 3V 28mA : 2000 RPM Speed ( DC 6V 40mA): 6000RPM Speed ( DC 12V 56mA): 12000RPM ?
• * Application: It is a reversible motor for toys, (like Model Airplane,ship,car, remote control devices),hand-made, school project and anything else you want.
• * Package: 2 x Motors

• Thread Size: M3; Rated Voltage: DC 6V; Rated Speed: 3000RPM
• Total Length: 46mm / 1.8 inch; Body Size: 24.2x30mm / 1x1.2 inch (D*H); Vibrating Wheel Size: 24x17x5mm / 0.9x0.7x0.2 inch (L*W*H)
• Miniature vibrating motors are used in a wide range of products, such as tools, scanners, instruments, and control sticks, massager. OR Make about equipment vibrate to remind and warn, such as mobile phones and alarms; vibrate as a power source, such as some robots; vibrate to prevent accumulation and retention of objects, such as various hopper, feeders, etc
• Metal vibraten head: it has the advantages of corrosion resistance, rust resistance, stable transmission rate, heat resistance and low noise; Pure copper coil, with good electrical conductivity, wear resistance, high-temperature resistance, and stable rotating speed; good carbon brush; Durable, wear-resistant, not easy to burn and rust
• Note: 1.Vibration is easy to cause looseness, so it is necessary to confirm whether all parts of the equipment are firmly installed;2.The vibration speed of some vibration motors increases with the increase of voltage. It is necessary to note that the motor is damaged due to excessive temperature rise.